HDCS1000 HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • CIF (352 x 288 pixels) array size in two options. Color or monochrome versions available
  • Random access and windowing capability to zoom to any sized window on 4 x 4 pixel boundaries
  • Panning capability to any location within the sensor array
  • Video rates up to 45 frames per second for CIF window size
  • 4:1 sub-sampling capability of viewing window, providing up to 162 frames per second
  • Still image capability
  • Mechanical shutter and flash trigger
  • Accumulation mode to aid in determining proper exposure time
  • Low power/standby modes
  • Machine solderable, high temperature tolerant color filter array
  • Two 10-bit internal successive-approximation ADCs
  • Automatic subtraction of column fixed pattern noise
  • Color array using RGB Bayer filter pattern
  • Integrated timing controller simplifying system design
  • Digital output via l0-bit synchronous parallel interface
  • Programmable features include: window size, integration time, gain control (separate for red, green and blue), data rate, interface timing, interrupt control, operation modes, selection of 8 or 10 bit output, drive level of output pads, access to status signals via a synchronous serial or asynchronous UART interface HDCS-1000 (Color) HDCS-1100 (Monochrome) Typical Applications
  • Video conferencing camera
  • Digital still camera
  • Surveillance and security video camera
  • Automotive
  • Machine vision system
  • Biometric security system (e.g., fingerprint recognition)
  • Toys

Typical Electrical Specifications Pixel Size 7.8 x 7.8 µm Maximum Clock Rate 25 MHz from externally supplied clock source A/D Dynamic Range 60 dB Pixel Signal-to-Noise Ratio (SNR) 66 dB Noise (Equivalent electrons) kTC 36 electrons Dark Current [1] 0.1 nA/cm2 @ 22°C ambient Sensitivity[2] 1.3 V/(Lux-sec @ 550 nm) Peak Quantum Efficiency[1, 2] 21% Saturation 1.3 V Full Well Capacity 65,000 electrons Conversion Gain[2] 16 µV/electron Programmable Gain Range 1 – 40 (255 increments) Fill Factor 42% Exposure Control 0.5 µs – 4 s in 0.5 µs steps Package 44 pin gull wing optical PQFP Supply Voltage 3.3 V, -5/+10% Power Consumption 200 mW max operating; 3.3 mW max standby Operating Temperature -5 to 65 °C Notes: 1. Specified over complete pixel 2. Measured at unity gain Block Diagram—Sensor Architecture Row ControlMain Control Sequencer Row Addr Column Addr Register Set Serial Interface Control Reg 0 Reg 1 Reg n Ctrl Row Decoder APS ARRAY Column Control Register Bus Control Bus Analog Row Buffer Column Decoder PGA Control PGA GAIN0/1 ADC Control Parallel Interface Control Ctrl Gain PGA 0 PGA 1Ctrl Ctrl DIN DO OE Reg Data Ctrl SIPO Ctrl Gain ADC 0 ADC 1 Output

10 Bit Parallel

www.hp.com/go/imagingelectronics For technical assistance or the location of your nearest Hewlett-Packard sales office, distributor or representative call: Americas/Canada: 1-800-235-0312 or 408-654-8675 Far East/Australasia: Call your local HP sales office. Japan: (81 3) 3335-8152 Europe: Call your local HP sales office. Data subject to change. Copyright © 1998 Hewlett-Packard Co. Obsoletes 5968-2422E 5968-3057E (11/98)