HDC4 MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MODEL: HDC4 http://www.m-system.co.jp/ HDC4 SPECIFICATIONS ES-3497 Rev.5 Page 1/3 DC POWER SUPPLY Functions & Features
- Accepting 85 – 132 V or 170 – 264 V AC and providing regulated 24 V DC output
- Rack & DIN rail mounting HDC4 1 + – U V OUT V.adj 2 3 4 5 POWER FG 40 (1.57) (3.62) DIN rail mounting mm (inch) 130 (5.12) MODEL: HDC4–[1]–[2]
ORDERING INFORMATION
- Code number: HDC4-[1]-[2] Specify a code from below for each [1] and [2]. (e.g. HDC4-K-D) OUTPUT VOLTAGE
24 V DC
[1] POWER INPUT AC Power K: 85 – 132 V AC (Operational voltage range 85 – 132 V, 47 – 440 Hz) L: 170 – 264 V AC (Operational voltage range 170 – 264 V, 47 – 440 Hz) [2] MOUNTING R: Rack D: DIN rail GENERAL SPECIFICATIONS Construction: Front terminal access; terminal cover provided Connection: M4 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated brass Isolation: output to power to FG SUPPLY OUTPUT ■ Output voltage: 24 V DC ±3 % (adjustable on the front panel), ripple 1.5 %p-p max. Typical load current: 2.0 A Maximum load current: 2.5 A @ 1 minute Overload protection: Current restriction in the voltage drop characteristics (automatic recovery) Overload voltage protection: No output; Recovers when the power input is turned off and on. INSTALLATION Operating temperature: 0 to 50°C (32 to 122°F) Operating humidity: 30 to 85 %RH (non-condensing) Dimensions Rack mounting: W36 × H99 × D126 mm DIN rail mounting: W40 × H92 × D130 mm Weight Rack mounting: 420 g (0.93 lb) DIN rail mounting: 300 g (0.66 lb) PERFORMANCE % of output voltage Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Load effect: 0.9% (load current: 0 – 2 A) Insulation resistance: ≥ 50 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute for 85 – 132 V AC; 2500 V AC @ 1 minute for 170 – 264 V AC (output to power, power to FG)
500 V AC @ 1 minute (output to FG)
MODEL: HDC4 http://www.m-system.co.jp/ HDC4 SPECIFICATIONS ES-3497 Rev.5 Page 2/3 CONNECTION DIAGRAM FG V U POWER INPUT OUTPUT VOLTAGE 24V DC EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) ■ RACK MOUNTING 36 (1.42) 91 (3.58) 83 ±.5 (3.27 ±.02) 126 (4.96) 25 (.98) TERMINAL COVER 5–M4 SCREW OUTPUT VOLTAGE ADJ. 2–4 (.12) dia. MTG HOLE ■ DIN RAIL MOUNTING 40 (1.57) 5 (.20) 92 (3.62) 89 (3.50) 130 (5.12) 20 (.79) 5–M4 SCREW OUTPUT VOLTAGE ADJ. TERMINAL COVER
MODEL: HDC4 http://www.m-system.co.jp/ HDC4 SPECIFICATIONS ES-3497 Rev.5 Page 3/3 MOUNTING REQUIREMENTS unit: mm (inch) ■ RACK MOUNTING 2–M3.5 SCREW 55 (2.17) min. 9.5 (.37) 83 (3.27) 91 (3.58) ANGLE BRACKET ■ DIN RAIL MOUNTING 55 (2.17) min. Specifications are subject to change without notice.