HDBF07012A62 SHOULDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 1 of 6 规格书编号 S PEC N O : 产 产 品 品 规 规 格 格 书 书 S S P P E E C C I I F F I I C C A A T T I I O O N N CUSTOMER 客 户 ： PRODUCT 产 品 ： SAW FILTER MODEL NO 型 号 ： HD BF 070 12A 6 2 SF6 - 2 PREPARED 编 制 ： CHECKED 审 核 ： APPROVED 批 准 ： D A T E 日 期 ： 200 8 - 9 - 25 无锡市好达电子有限公司 Shoulder Electronics Limited 客户确认 C USTOMER RECEIVED: 审核 C HECKED 批准 APPROVED 日期 D ATE

SAW FILTER HD BF 070 12A62 SF6 - 2 www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 2 of 6 更改历史记录 History Record 更改日期 Date 规格书编号 Spec . No . 产品型号 Part No . 客户产品型号 Customer No . 更改内容描述 Modify Content 备注 Remark

SAW FILTER HD BF 070 12A62 SF6 - 2 www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 3 of 6 1. SCOPE This specification shall cover the characteristi c s of SAW filter BF070 12A 6 2 2. ELECTRICAL SPECIFICATION DC V oltage VDC 10V AC V oltage Vpp 10V50Hz/60Hz Operation temperature - 25 ℃ to + 55 ℃ Storage temperature - 4 0 ℃ to + 85 ℃ RF Power Dissipation 0dBm Electronic Characteristics Minimum Typical Maximum Center Frequency MHz 69. 7 70.0 70. 3 Insertion Loss dB - 24.0 2 6 .0 3dB Bandwidth 40dB Bandwidth MHz MHz 12.2 12.5 15.0 12.8 16.0 Amplitude Ripple (Fo +/ - 5 . 0 MHz) Group Delay Variation (Fo +/ - 5 . 0 MHz) dB nsec 0. 5 1.0 1 0 0 Absolute Delay usec - 1. 77 - Ultimate Rejection dB 55 60 - Temperature Coefficient of Frequency ppm/°C - - 70 -

SAW FILTER HD BF 070 12A62 SF6 - 2 www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 4 of 6 3. DIMENSION 4.TEST CIRCUIT 5. ENVIRONMENTAL CHARACTERISTICS 5 - 1 High temperature exposure Subject the device to +85 ℃ for 16 hours. Then release the filter into the room conditions for 24 hours prior to the measurement. It shall fulfill the specifications in table 1. 5 - 2 Low temperature exposure Subject the device to - 20 ℃ for 16 hours. Then release the device into th e room conditions for 24 hours prio r to the measurement. It shall fulfill the specifications in table 1. 5 - 3 Temperature cycling Subject the device to a low temperature of - 40 ℃ for 30 minutes. Following by a high temperature of +80 ℃ for 30 Minutes. Then release the device into the room conditions for 24 hours prior to the me a surement. It shall meet the specifications in table 1. 5 - 4 Resistance to solder heat Dip the device terminals no closer than 1.5mm into the solder bath at 260 ℃ ± 10 ℃ for 10 ± 1 sec. T hen release the device into the room conditions for 4 hours. The device shall meet the specifications in table 1.

SAW FILTER HD BF 070 12A62 SF6 - 2 www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 5 of 6 5 - 5 Solderability Subject the device terminals into the solder bath at 245 ℃ ± 5 ℃ for 5s, More than 95% area of the terminals must be covere d with new solder. It shall meet the specifications in table 1. 5 - 6 Mechanical shock Drop the device randomly onto the concrete floor from the height of 1m 3 times. the device shall fulfill the specifications in table 1. 5 - 7 Vibration Subject the devic e to the vibration for 1 hour each in x,y and z axes with the amplitude of 1.5 mm at 10 to 55 Hz. The device shall fulfill the specifications in table 1. 5 - 8 Lead fatigue 5 - 8 - 1 Pulling test Weight along with the direction of lead without an shock 1 kg . The device shall satisfy all the initial Characteristics. 5 - 8 - 2 Bending test Lead shall be subject to withstand against 90 ℃ bending with 450g weight in the d i rection of thic kness. This operation shall be done toward both direction. The device sh all show no evidence of damage and shall satisfy all the initial electrical characteristics.

SAW FILTER HD BF 070 12A62 SF6 - 2 www.shoulder.cn Tel:0755 - 82916880 Fax:0755 - 82916881 E - mail: info@shoulder.cn Page 6 of 6 Typical frequency response 6. REMARK

6.1 Static voltage

Static voltage between signal load & ground may cause det e rioration &destruction of the compon ent. Please avoid static voltage.

6.2 Ultrasonic cleaning

Ultrasonic vibration may cause det e ri oration & destruction of the component. Please avoid ultrasonic cleaning

6.3 Soldering

Only leads of component may be soldered. Please avoid s oldering another part of component