HD29029 RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • High-speed operation 7 ns typ in transition times (tTLH, tTHL) at CL = 200 pF
  • No external components needed because direct drive is available at TTL level inputs
  • Output swing voltage: 12 V
  • Sink/Sourse currents: 0.5 A (for each)
  • Output cross voltage: 50% typ
  • Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD29029FPEL SOP-8 pin (JEITA) FP-8DGV FP EL (2,500 pcs/reel) Pin Arrangement (Top view) NC GND 8 NC VCC

Rev.2.00, Jul.16.2004, page 2 of 6 Function Table Input A Output Y HL LH H: High level L: Low level Absolute Maximum Ratings Item Symbol Ratings Unit Supply Voltage V CC*1 15 V Input Voltage V IN 7V Output Current I O(peak) ±0.5 A Operating Temperature Ta –20 to +75 °C Storage Temperature Tstg –65 to +150 °C Junction Temperature Tj 150 °C Power Dissipation per Package P T*2 0.735 W Notes: 1. The voltage value is defined with respect to grund terminal unless otherwise noted. 2. The total power dissipation is at Ta = 25°C. When driving large capacity with high frequency radiation is needed. There fore, delating with 5.9 mW/°C must be done as shown below. 3. The absolute maximum ratings are values which must not individually be eceeded, and furthermore, no two of which may be realized at same time. 1.0 0.735 0.5 –20 25 75 500 T( °C)a PT (W) 0.44 1000 750 500 250 T = 75a °C V = 13.0 VCC V = 12.0 VCC V = 9.0 VCC V = 8.0 VCC Operating Frequency f (MHz) Load Capacitance CL (PF)

Rev.2.00, Jul.16.2004, page 3 of 6 Recommended Operating Conditions Item Symbol Min Typ max Unit Supply Voltage V CC 8.0 9.0 13.0 V Operating Temperature Ta –20 25 75 °C Electrical Characteristics (VCC = 8 to 13 V, Ta = –20 to 75°C) Item Symbol Min Typ Max Unit Conditions Input Voltage V IH 2.0 — — V VIL ——0 . 6 V Output Voltage V OH VCC–2 — — V V IL = 0.6 V, IOH = –1 mA VOL ——0 . 5 V V IH = 2.0 V, IOH = 1 mA Input Current I IH ——2 0µ A V I = 2.7 V VIL — — –100 µA V I = 0.4 V Supply Current I CCH ——1 0m A ICCL ——2 5m A Input Current I LI — — 100 µA V I = 7 V Input Clamp Voltage V IK — — –1.5 V I IN = –18 mA Switching Characteritics (CL = 200 pF, Ta = 25°C) Item Symbol Min Typ Max Unit Conditions Propagation Delay Time t PHL — 4.0 15.0 ns V CC = 9 V — 4.0 13.0 ns V CC = 12 V tPLH — 6.0 15.0 ns V CC = 9 V — 6.0 13.0 ns V CC = 12 V Transition Time t THL — 8.0 14.0 ns V CC = 9 V — 7.0 12.0 ns V CC = 12 V tTLH — 8.0 14.0 ns V CC = 9 V — 7.0 12.0 ns V CC = 12 V

Rev.2.00, Jul.16.2004, page 4 of 6 Switching Time Test Method Test circuit Output Input CL VCC Pulse Generator Zout = 50 Ω Note: 1. C L includes probe and jig capacitance. Waveforms Input 10 % 90 % 5 ns 1.5 V 90 % 0 V 3 V 1.5 V 10 % VOL OHV Output tPHL tPLH 90 % 90 % 10 % 10 % tTHL tTLH 5 ns Note: 1. Input Waveforms: f = 1 MHz, duty cycle 50%

Rev.2.00, Jul.16.2004, page 5 of 6 Output Characteristics (CL = 200 pF, Ta = 25°C) Item Symbol Min Typ Max Unit Conditions Output Cross Voltage V X 20 50 80 % V CC = 9 V 20 50 80 % V CC = 12 V Test circuit CL VCC CL Pulse Generator Zout = 50 Ω Note: 1. C L includes probe and jig capacitance. Waveforms 2A or 1A 10 % 90 % 5 ns 1.5 V 90 % 0 V 3 V 1.5 V 10 % 90 % 10 % 90 % 10 %1A or 2A 1Y or 2Y 2Y or 1Y 20 % 80 %80 % VX 20 % 80 % VX 80 % OHV OLV 5 ns 20 % 20 % Note: 1. Input Waveforms: f = 1 MHz, duty cycle 50%

Rev.2.00, Jul.16.2004, page 6 of 6 Package Dimensions Package Code JEDEC JEITA Mass (reference value) FP-8DGV Conforms 0.10 g *This dimension include Pd plating 0.10 ± 0.10

2.03 Max

4.4 *0.20 ± 0.05 4.85

0.75 Max

0.60+ 0.25 – 0.18 *0.40 ± 0.05 0.12 0.15 0˚ – 8˚ M 8 5 1 4 1.05

5.25 Max

1.27 6.50+ 0.25 – 0.15 Unit: mm

Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 RENESAS SALES OFFICES © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0