HD1.0M25 NTE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
HIGH–FREQ ALUMINUM ELECTROLYTIC HD SERIES 9NTE Electronics, Inc. /C0068 Voice (800) 631–1250 (973) 748–5089 /C0068 FAX (973) 748–6224 /C0068 http://www.nteinc.com SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non–polarized capacitors are designed specifically for horizontal deflec- tion current correction where high frequency and high ripple current occur. RATINGS Capacitance Range: 1.0µf to 10µf Tolerance: ±20% Voltage Range: 25 Volts and 50 Volts PERFORMANCE SPECIFICATIONS Operating Temperature Range: –25°C to +85°C (–13°F to +185°F) Leakage Current: I ≤ 0.2CV (measured after 5 minutes of applied rated voltage) I = Leakage Current (µA) C = Nominal Capacitance (µf) V = Rated Voltage (V) Capacitance Tolerance: ±20% (M) measured at +20°C (+68°F), 1kHZ Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F), at specified ripple current Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within ±15% of initial value Shelf Life: 500 Hrs @ +85°C (+185°F), no voltage applied Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within ±15% of initial value
ORDERING INFORMATION
HD 4.7 M 50 Series Capacitance Tolerance Voltage MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petro- leum ether, propanol and/or commercial deter- gents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroe- thylene, trichloroethane, or methylchloride are not recommended as they may damage the ca- pacitor. CASE SIZE AND DIMENSIONS: D’ Ø Insulating Sleeve d Ø L’ 5.0 Min
15.0 Min
A ±0.5 HD Series Dimensions: Diameter (D Ø) x Length (L): mm Capacitance (µf) 25V and 50V Ripple Current* (Ap–p) 1.0 12.5 x 20 2.0 2.2 12.5 x 25 3.0 3.3 16 x 25 4.0 4.7 16 x 31.5 5.0 5.6 16 x 31.5 6.0 6.8 16 x 35.5 7.0 8.2 18 x 35.5 8.0 10.0 18 x 40 9.0 * Allowable ripple current @ 70°C, 12V DC, and 15.75kHZ HD Mechanical Specs: Dimensions (mm) Outside Diameter (D Ø) 12.5 16 18 Lead Spacing (A) 5.0 7.5 7.5 Lead Wire (d Ø) 0.6 0.8 0.8