MC74HCT273A ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

 Semiconductor Components Industries, LLC, 2000 March, 2000 – Rev. 8

1 Publication Order Number:

/C0077/C0067/C0055/C0052/C0072/C0067/C0084/C0050/C0055/C0051/C0065 /C0079/C0099/C0116/C0097/C0108 /C0068 /C0070/C0108/C0105/C0112/C0045/C0070/C0108/C0111/C0112 /C0119/C0105/C0116/C0104 /C0067/C0111/C0109/C0109/C0111/C0110 /C0067/C0108/C0111/C0099/C0107 /C0097/C0110/C0100 /C0082/C0101/C0115/C0101/C0116 /C0119/C0105/C0116/C0104 /C0076/C0083/C0084/C0084/C0076/C0045/C0067/C0111/C0109/C0112/C0097/C0116/C0105/C0098/C0108/C0101 /C0073/C0110/C0112/C0117/C0116/C0115 High–Performance Silicon–Gate CMOS The MC74HCT273A may be used as a level converter for interfacing TTL or NMOS outputs to High–Speed CMOS inputs. The HCT273A is identical in pinout to the LS273. This device consists of eight D flip–flops with common Clock and Reset inputs. Each flip–flop is loaded with a low–to–high transition of the Clock input. Reset is asynchronous and active low.

  • Output Drive Capability: 10 LSTTL Loads
  • TTL/NMOS Compatible Input Levels
  • Outputs Directly Interface to CMOS, NMOS and TTL
  • Operating V oltage Range: 4.5 to 5.5 V
  • Low Input Current: 1.0 µA
  • In Compliance with the Requirements Defined by JEDEC Standard No. 7A
  • Chip Complexity: 284 FETs or 71 Equivalent Gates LOGIC DIAGRAM DATA INPUTS 11CLOCK D7 18 1RESET PIN 20 = VCC PIN 10 = GND NONINVERTING OUTPUTS FUNCTION TABLE Inputs Output Reset Clock D Q LX X L HH H HL L H L X No Change H X No Change X = Don’t Care Z = High Impedance http://onsemi.com MARKING DIAGRAMS A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week SOIC WIDE–20 DW SUFFIX CASE 751D HCT273A AWLYYWW PDIP–20 N SUFFIX CASE 738 MC74HCT273AN AWLYYWW Device Package Shipping

ORDERING INFORMATION

MC74HCT273AN PDIP–20 1440 / Box MC74HCT273ADW SOIC–WIDE 38 / Rail MC74HCT273ADWR2 SOIC–WIDE 1000 / Reel PIN ASSIGNMENT RESET GND Q1 5 VCC CLOCK

http://onsemi.com ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS* ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎ ÎÎÎÎÎ Value ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ VCC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Voltage (Referenced to GND) ÎÎÎÎÎ ÎÎÎÎÎ – 0.5 to + 7.0 ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ Vin ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Voltage (Referenced to GND) ÎÎÎÎÎ ÎÎÎÎÎ – 0.5 to VCC + 0.5 ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ Vout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Output Voltage (Referenced to GND) ÎÎÎÎÎ ÎÎÎÎÎ – 0.5 to VCC + 0.5 ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ Iin ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Current, per Pin ÎÎÎÎÎ ÎÎÎÎÎ ± 20 ÎÎÎ ÎÎÎ mA ÎÎÎÎ ÎÎÎÎ Iout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Output Current, per Pin ÎÎÎÎÎ ÎÎÎÎÎ ± 25 ÎÎÎ ÎÎÎ mA ÎÎÎÎ ÎÎÎÎ ICC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Current, VCC and GND Pins ÎÎÎÎÎ ÎÎÎÎÎ ± 50 ÎÎÎ ÎÎÎ mA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ PD ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Power Dissipation in Still Air Plastic DIP† ÎÎÎÎÎ Î ÎÎÎ Î ÎÎÎÎÎ 750 500 ÎÎÎ Î Î Î ÎÎÎ mW ÎÎÎÎ ÎÎÎÎ Tstg ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Storage Temperature ÎÎÎÎÎ ÎÎÎÎÎ – 65 to + 150 ÎÎÎ ÎÎÎ /C0095C ÎÎÎÎ ÎÎÎÎ TL ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Lead Temperature, 1 mm from Case for 10 Seconds (SOIC or Plastic DIP) ÎÎÎÎÎ ÎÎÎÎÎ 260 ÎÎÎ ÎÎÎ /C0095C *Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. †Derating — Plastic DIP: – 10 mW//C0095C from 65/C0095 to 125/C0095C For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High–Speed CMOS Data Book (DL129/D). RECOMMENDED OPERATING CONDITIONS ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎ ÎÎÎ Min ÎÎ ÎÎ Max ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ VCC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Voltage (Referenced to GND) ÎÎÎ ÎÎÎ 4.5 ÎÎ ÎÎ 5.5 ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ Vin, Vout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Voltage, Output Voltage (Referenced to GND) ÎÎÎ ÎÎÎ ÎÎ ÎÎ VCC ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ TA ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Operating Temperature, All Package Types ÎÎÎ ÎÎÎ – 55 ÎÎ ÎÎ + 125 ÎÎÎ ÎÎÎ /C0095C ÎÎÎÎ ÎÎÎÎ tr, tf ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Input Rise and Fall Time (Figure 1) ÎÎÎ ÎÎÎ ÎÎ ÎÎ 500 ÎÎÎ ÎÎÎ ns DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Guaranteed Limit ÎÎÎ ÎÎÎ ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Test Conditions ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ VCC V ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ – 55 to 25/C0095C ÎÎÎ Î Î Î ÎÎÎ /C0118 85/C0095C ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ /C0118 125/C0095C ÎÎÎ Î Î Î ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ VIH ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Minimum High–Level Input Voltage ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vout = 0.1 V or VCC – 0.1 V |Iout| /C0118 20 µA ÎÎÎÎ ÎÎÎÎ 4.5 5.5 ÎÎÎÎ ÎÎÎÎ 2.0 2.0 ÎÎÎ ÎÎÎ 2.0 2.0 ÎÎÎÎ ÎÎÎÎ 2.0 2.0 ÎÎÎ ÎÎÎ V ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ VIL ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Maximum Low–Level Input Voltage ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vout = 0.1 V or VCC – 0.1 V |Iout| /C0118 20 µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.5 5.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.8 0.8 ÎÎÎ Î Î Î ÎÎÎ 0.8 0.8 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.8 0.8 ÎÎÎ Î Î Î ÎÎÎ V ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ VOH ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Minimum High–Level Output Voltage ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vin = VIH or VIL |Iout| /C0118 20 µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.5 5.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.4 5.4 ÎÎÎ Î Î Î ÎÎÎ 4.4 5.4 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.4 5.4 ÎÎÎ Î Î Î ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VIH or VIL |Iout| /C0118 4.0 mA ÎÎÎÎ ÎÎÎÎ 4.5 ÎÎÎÎ ÎÎÎÎ 3.98 ÎÎÎ ÎÎÎ 3.84 ÎÎÎÎ ÎÎÎÎ 3.7 ÎÎÎ ÎÎÎ ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ VOL ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Maximum Low–Level Output Voltage ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vin = VIH or VIL |Iout| /C0118 20 µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.5 5.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.1 0.1 ÎÎÎ Î Î Î ÎÎÎ 0.1 0.1 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.1 0.1 ÎÎÎ Î Î Î ÎÎÎ V ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vin = VIH or VIL |Iout| /C0118 4.0 mA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.26 ÎÎÎ Î Î Î ÎÎÎ 0.33 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 0.4 ÎÎÎ Î Î Î ÎÎÎ ÎÎÎÎ ÎÎÎÎ Iin ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Input Leakage Current ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VCC or GND ÎÎÎÎ ÎÎÎÎ 5.5 ÎÎÎÎ ÎÎÎÎ ± 0.1 ÎÎÎ ÎÎÎ ± 1.0 ÎÎÎÎ ÎÎÎÎ ± 1.0 ÎÎÎ ÎÎÎ µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ ICC ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Maximum Quiescent Supply Current (per Package) ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vin = VCC or GND Iout = 0 µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 5.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 4.0 ÎÎÎ Î Î Î ÎÎÎ ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 160 ÎÎÎ Î Î Î ÎÎÎ µA ÎÎÎÎ ÎÎÎÎ ΔICC ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Additional Quiescent Supply Current ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = 2.4 V, Any One Input Vin=V CC or GND Other Inputs ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ≥ –55/C0095C ÎÎÎÎÎÎ ÎÎÎÎÎÎ 25/C0095C to 125/C0095C ÎÎÎ ÎÎÎ ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Current ÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎ Vin = VCC or GND , Other In uts lout = 0 µA ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 5.5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 2.9 ÎÎÎÎÎÎ Î ÎÎÎÎ Î ÎÎÎÎÎÎ 2.4 ÎÎÎ Î Î Î ÎÎÎ mA NOTE: Information on typical parametric values can be found in Chapter 2 of the ON Semiconductor High–Speed CMOS Data Book (DL129/D). This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high–impedance cir- cuit. For proper operation, Vin and Vout should be constrained to the range GND /C0118 (Vin or Vout) /C0118 VCC . Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC ). Unused outputs must be left open.

http://onsemi.com AC ELECTRICAL CHARACTERISTICS (VCC = 5.0 V ± 10%, CL = 50 pF, Input tr = tf = 6.0 ns) ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Guaranteed Limit ÎÎÎ ÎÎÎ ÎÎÎÎÎ Î ÎÎÎ Î ÎÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ Fig. ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ – 55 to 25/C0095C ÎÎÎ Î Î Î ÎÎÎ /C0118 85/C0095C ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ /C0118 125/C0095C ÎÎÎ Î Î Î ÎÎÎ Unit ÎÎÎÎÎ ÎÎÎÎÎ fmax ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Clock Frequency (50% Duty Cycle) ÎÎÎÎ ÎÎÎÎ 1, 4 ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ MHz ÎÎÎÎÎ ÎÎÎÎÎ tPLH , tPHL ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Propagation Delay, Clock to Q ÎÎÎÎ ÎÎÎÎ 1, 4 ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎÎ ÎÎÎÎÎ tPHL ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Propagation Delay, Reset to Q ÎÎÎÎ ÎÎÎÎ 2, 4 ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎÎ Î ÎÎÎ Î ÎÎÎÎÎ tTLH , tTHL ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Output Transition Time, Any Output ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ 1, 5 ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ ÎÎÎ Î Î Î ÎÎÎ ÎÎÎÎ Î ÎÎ Î ÎÎÎÎ ÎÎÎ Î Î Î ÎÎÎ ns NOTE: For propagation delays with loads other than 50 pF, and information on typical parametric values, see Chapter 2 of the ON Semiconductor High–Speed CMOS Data Book (DL129/D). Typical @ 25°C, VCC = 5.0 V C PD Power Dissipation Capacitance (Per Gate)* 30 pF * Used to determine the no–load dynamic power consumption: PD = CPD VCC 2f + ICC VCC . For load considerations, see Chapter 2 of the ON Semiconductor High–Speed CMOS Data Book (DL129/D). ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ TIMING REQUIREMENTS (VCC = 5.0 V ± 10%, CL = 50 pF, Input tr = tf = 6.0 ns) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Guaranteed Limit ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ – 55 to 25/C0095C ÎÎÎÎÎ ÎÎÎÎÎ /C0118 85/C0095C ÎÎÎÎ ÎÎÎÎ /C0118 125/C0095C ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎ ÎÎÎ Fig. ÎÎÎ ÎÎÎ Min ÎÎÎ ÎÎÎ Max ÎÎÎ ÎÎÎ Min ÎÎÎ ÎÎÎ Max ÎÎ ÎÎ Min ÎÎÎ ÎÎÎ Max ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ tsu ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Minimum Setup Time, Data to Clock ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎ ÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎ ÎÎÎÎ th ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Minimum Hold Time, Clock to Data ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 3.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 3.0 ÎÎÎ ÎÎÎ ÎÎ ÎÎ 3.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎ ÎÎÎÎ trec ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Minimum Recovery Time, Set or Reset Inactive to Clock ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎ ÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎ ÎÎÎÎ tw ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Minimum Pulse Width, Clock ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎ ÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎ ÎÎÎÎ tw ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Minimum Pulse Width, Set or Reset ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎ ÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎ ÎÎÎÎ tr, tf ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Input Rise and Fall Times ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 500 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 500 ÎÎ ÎÎ ÎÎÎ ÎÎÎ 500 ÎÎÎ ÎÎÎ ns

http://onsemi.com PACKAGE DIMENSIONS SO–20 DW SUFFIX CASE 751D–05 ISSUE F PDIP–20 N SUFFIX PLASTIC DIP PACKAGE CASE 738–03 ISSUE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. M L J 20 PL MBM0.25 (0.010) T DIM MIN MAX MIN MAX MILLIMETERSINCHES A 25.66 27.171.010 1.070 B 6.10 6.600.240 0.260 C 3.81 4.570.150 0.180 D 0.39 0.550.015 0.022 G 2.54 BSC0.100 BSC J 0.21 0.380.008 0.015 K 2.80 3.550.110 0.140 L 7.62 BSC0.300 BSC M 0 15 0 15 N 0.51 1.010.020 0.040 /C0095/C0095/C0095/C0095 E 1.27 1.770.050 0.070 –A– SEATING PLANE K N FG D 20 PL –T– MAM0.25 (0.010) T E B C F 1.27 BSC0.050 BSC B20X H10X C L 18X A1 A SEATING PLANE /C0113 h X 45/C0095 E D M0.25 MB M0.25 SA SBT e T B A DIM MIN MAX MILLIMETERS A 2.35 2.65 A1 0.10 0.25 B 0.35 0.49 C 0.23 0.32 D 12.65 12.95 E 7.40 7.60 e 1.27 BSC H 10.05 10.55 h 0.25 0.75 L 0.50 0.90 /C0113 0 7 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF B DIMENSION AT MAXIMUM MATERIAL CONDITION./C0095/C0095

http://onsemi.com Notes

http://onsemi.com Notes

http://onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone : 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–asia@hibbertco.com JAPAN : ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549 Phone : 81–3–5740–2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. MC74HCT273A/D NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone : (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time) Email: ONlit–german@hibbertco.com French Phone : (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time) Email: ONlit–french@hibbertco.com English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, England, Ireland