HCSK SEI | Alldatasheet

Document overview

  • Manufacturer or author: LCLOUD
  • PDF pages: 6

Technical content

Rev Date: 9/12/2022 1 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions Features:

  • Metal element current shunt resistor
  • 12W permanent power
  • Inductance < 3nH
  • Internal heat resistance 15K/W
  • AEC-Q200 compliant
  • 100% RoHS compliant and lead free without exemption
  • Halogen free
  • REACH compliant Applications:
  • Power modules
  • Frequency converters
  • Current sensor for power hybrid sources
  • High current handling for automotive engine controls and power management Product photo shown above is typical. Actual components may vary depending on resistive element and amount of trim adjustment required to meet desired resistance value. Electrical Specifications Mechanical Specifications – 1216 Ohmic Range (Ω) and Tolerance 1% and 5% 5 9 0.0005 3 7 0.001 9 0.0005 7 0.001 6 0.002 3 5 0.003 4 0.004 3 0.005 12 0.0002 9 0.0005 8 0.0007 7 0.001 3 5 0.003 2 ± 50 HCSK4026 HCSK2725 Type/Code Power Rating (W) @ 100°C TCR (ppm/ºC) HCSK1216 Power Rating (W) @ 70°C Type/Code Unit Unit (*) Reference only. A (*) 1.05 E 0.020 0.50 D1F G 0.041 C HL B HCSK1216

Rev Date: 9/12/2022 2 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions Mechanical Specifications – 2725 Mechanical Specifications – 4026 Type/Code Unit 0.148 ± 0.008 inches 2.65 ± 0.20 mm Type/Code Unit 0.398 ± 0.006 0.260 ± 0.008 inches 10.10 ± 0.15 6.60 ± 0.20 mm W F 0.197 K 0.008 E H T L 5.00 A 1.00 0.028 0.70 0.028 0.70 B C 0.039HCSK4026 (all Ω values) 0.272 0.024 G (max.) I J 4.90 0.193 HCSK4026 (0.0002 Ω) HCSK4026 (except 0.0002 Ω) 6.90 0.60 0.20 Type/Code Unit Type/Code Unit (*) Reference only. HCSK2725 (0.004) 0.193 4.90 HCSK2725 (0.005) 0.193 4.90 HCSK2725 (0.002) 0.193 4.90 HCSK2725 (0.003) 0.193 4.90 HCSK2725 (0.0005) 0.193 4.90 HCSK2725 (0.001) 0.193 4.90 F G (*) A D1 D2 HCSK2725 (0.004) 0.122 3.10 HCSK2725 (0.005) 0.122 3.10 HCSK2725 (0.002) 0.122 3.10 HCSK2725 (0.003) 0.122 3.10 HCSK2725 (0.0005) 0.122 3.10 HCSK2725 (0.001) 0.122 3.10 L B C (*) H E

Rev Date: 9/12/2022 3 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions Power Derating Curve: Environmental Performance Characteristics Test Test Method Test Specification Test Condition Short Time Overload - Δ R: ± 1% 5 times rated power for 5 seconds +20°C/+125ºC +25°C/+125ºC Operating Temperature Range is - 55°C to + 170°C Temperature Coefficient of Resistance (TCR) (1216, 4026) JIS-C5202-5.2 Refer to Electrical Specifications The chip (mounted on board) is exposed in the heat chamber, 125ºC for 1000 hours. High Temperature Exposure Moisture Resistance JIS-C5202-7.2 Δ R: ± 1% Δ R: ± 1% MIL-STD-202, Method 106 The specimens shall be placed in a chamber and subjected to a relative humidity of 90 ~ 98% and a temperature of 25ºC/65ºC, 10 cycles. Temperature Coefficient of Resistance (TCR) (2725) JIS-C5202-5.2 Refer to Electrical Specifications Note: The terminal electron temperature of component should be below 100°C. Storage Conditions: Temperature of 22 ~ 28°C. Humidity: 40 ~ 75%. Apply rated power for 1000 hours with 1.5 hours ON and 0.5 hour OFF.Load Life The chip (mounted on board) is exposed, -55 ± 3ºC (30 minutes)/+125 ± 2ºC (30 minutes) for 5 cycles. The following conditions shown in the figure below. Rapid Change of Temperature JIS-C5202-7.10 JIS-C5202-7.4 Δ R: ± 1% Δ R: ± 1% Δ R R x Δ tTCR (ppm/ºC ) = x 106 Δ R R x Δ tTCR (ppm/ºC ) = x 106

Rev Date: 9/12/2022 4 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions Taping Specifications – Embossed Plastic Tape Function Performance Characteristics Test Test Method Test Specification Test Condition Mount the chip to test 90 mm (L) * 40 mm (W) FR4 printed circuit board substrate. Apply pressure in direction of arrow unit band width reaches 2 mm (+0.2 / -0 mm) illustrated in the figure below and hold for 10 ± 1 seconds. Bending Strength JIS-C5202-6.1 Δ R: ± 1% JIS-C5202-6.11 Solder shall cover 95% or more of the electrode area. Solderability The part shall be immersed into the flux specified in the solder bath 235ºC ± 5ºC for 2 seconds ± 0.5 seconds. It shall be immersed to a point 10 mm from its root. (Sn96.5/Ag3.0/Cu0.5) Type/Code Unit Unit Type/Code Unit Unit W WA B E F T HCSK1216 HCSK2725 A B E F P0 P1 P2 D0 TP0 P1 P2

Rev Date: 9/12/2022 5 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions Soldering Recommendations:

  • Peak reflow temperatures and durations ▪ IR Reflow Peak = 260ºC max for 10 seconds ▪ Not suitable for wave soldering
  • Recommended IR reflow profile: RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the v arious regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances ” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability o f our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. Recommended Pad Layouts RoHS Compliance Status HCSK Kelvin Termination Current Shunt Resistor SMD YES 100% Copper Always Always Lead-Free Effective Date Code (YY/WW) Standard Product Series

Description

Mfg. Effective Date (Std Product Series) Taping Specifications – Embossed Plastic Tape (cont.) Type/Code Unit Type/Code Unit 0.165 ± 0.004 inches 3.20 ± 0.10 mm HCSK4026 (all Ω values) HCSK4026 (0.0002 Ω) TP0 P1 P2 D0 A B E F W HCSK4026 (except 0.0002 Ω) Type/Code Unit f g HCSK1216 HCSK2725 HCSK4026 a b c e

Rev Date: 9/12/2022 6 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. HCSK Series Kelvin Termination Metal Element Current Shunt Resistor Stackpole Electronics, Inc. Resistive Product Solutions “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we s upply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the re quirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. 1 2 3 4 5 6 7 8 9 10 11 12 13 13 H C S K 2 7 2 5 F T 1 L 0 0 How to Order Product Series Size Resistance Value HCSK 1216 Code Tol Code Description Size Quantity

2725 F 1% 1216 3000

4026 J 5% 2725, 4026 1400

0.0005 ohm = L500 0.001 ohm = 1L00 Tolerance Packaging Four characters with "L" used as multiplier of 10-3 for any value under 0.1 ohm T Embossed Plastic Tape