HCP JIANGHAI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

  • Solid Aluminium Electrolytic Capacitor with Conductive Polymer
  • Ultra low ESR
  • High Ripple Current
  • Switchmode Power Supplies, Computer, DC/DC Converter
  • Noise Suppression in Smoothing / High-Frequency Circuits HCP lower ESR CD 284 XY HPM miniaturized Frequency characteristics of Impedance and ESR 0.1 100 1000 HCP 470µF 6,3V Frequency (kHz) 10000 1000 100 Z, ESR (mOhm) ESR Z Frequency characteristics of Impedance and ESR 0.1 100 1000 HCP 820µF 4V Frequency (kHz) 10000 1000 100 Z, ESR (mOhm) ESR Z Capacity Drift: Polymer Capacitor versus Standard Electrolytic Capacitor -55°C -40°C -25°C 0°C 20°C 40°C 80°C 105°C Temperature 600µF 500µF 400µF 300µF 200µF 100µF 0µF Capacity HCP 10V 470µF Standard 25V 470µF ESR Drift: Polymer Capacitor versus Standard Electrolytic Capacitor -55°C -40°C -25°C 0°C 20°C 40°C 80°C 105°C Temperature -10 ESR (Ohm) HCP 10V 470µF Standard 25V 470µF Typical Curves Item Characteristics Operating Temperature Range (°C) -55 ~ +105 Voltage Range (V) 4 ~ 16 Capacitance Range (µF) 68 ~ 1200 Capacitance Tolerance (20°C, 120Hz) ± 20% Surge Voltage Rated Voltage x 1,15 Leakage Current (µA) The initial specified value or less (20°C, 2min) Dissipation Factor (20°C, 120Hz) The initial specified value or less Equivalent Series Resistance (20°C, 100kHz) The initial specified value or less Temperature Characteristics Z (+105°C) / Z (+20°C) ≥ 0,75 Stability at 100kHz Z Z (-55°C) / Z (+20°C) ≤ 1,25 Stability at 100kHz Load Life 2000h, Rated voltage applied at 105°C Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value Moisture Resistance 1000h, Rated Voltage applied at 60°C, 90~95% RH Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value Surge Voltage Characteristics 1000 cycles at 105°C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value Polymer Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2

20°C, 100kHz Max Ripple Current 105°C, 100kHz Dissipation Factor 20°C, 120Hz Leakage Current Size Ø D x L (V) (µF) (mΩ) (mArms) (µA) (mm) 510 4 080 0,08 410 8 x 11,5 560 4 080 0,08 450 8 x 11,5 620 4 260 0,08 500 8 x 11,5 680 4 840 0,08 550 10 x 12,5 750 5 040 0,08 600 10 x 12,5 820 5 040 0,08 655 10 x 12,5 1 000 5 040 0,08 800 10 x 12,5 1 200 5 040 0,15 960 10 x 12,5 6,3 150 2 780 0,07 190 8 x 11,5 220 3 000 0,07 280 8 x 11,5 330 3 500 0,08 415 8 x 11,5 390 3 810 0,08 490 8 x 11,5 470 3 810 0,08 595 8 x 11,5 560 4 330 0,08 705 10 x 12,5 680 4 840 0,08 860 10 x 12,5 820 5 040 0,15 1 035 10 x 12,5 100 2 670 0,07 200 8 x 11,5 150 3 020 0,07 300 10 x 12,5 220 3 370 0,07 440 10 x 12,5 330 4 140 0,08 660 10 x 12,5 390 4 510 0,08 780 10 x 12,5 470 4 510 0,08 940 10 x 12,5 2 700 0,06 220 8 x 11,5 100 2 740 0,06 320 8 x 11,5 150 3 260 0,06 480 10 x 12,5 330 5 050 0,06 1 056 10 x 12,5 Ratings for HCP Series Custom products are available on request. HCP Series Polymer Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2

R PT 101 M FF 0611 JExxxxx Technology Terminal Type Rated Voltage Code Series Code Capacitance Code (in µF) Capacitance Tolerance Lead Form Terminal/ Pitch Size Dimension for Specials only EC = Electrolytic Capacitor SMD = V For coding please refer to the pages of ratings CD VS = BS 0,47 = R47 ±20% = M SMD: 4x7 = 0407 Radial = R CD VH = VH 1,0 = 010 ±10% = K Taped = FF Terminal = T2 5x11,5 = 0511 PC = Polymer Capacitor Snap-In = S CD VZ = VZ Radial: 6,3x11,5 = 0611 CD 261 = LK 100 = 101 +50 / -10% = T Long Lead = LL 2,0mm = 20 35x80 = 3580 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 CD 262 = QM 10 000 = 103 Cut 4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY on request: alternative lead forms (axial, 90° - angle, others) 12,5mm = 12 CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4

2 Pin

= P2 CD 294 = BW 6,3mm Pin Length = T6

3 Pin

= P3 CD 295 = BC Soldering Pin = S4

4 Pin

= P4 CD 296 = KC

5 Pin

= P5 CD 297 = BB preferred CD 299 = PG CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Order Code SMD, Radial, Snap-In Technical Specification SMD Type Dimensions Ø DxL 4x5,4 5x5,4 6,3x5,4 6,3x7,7 8x10,5 8x11,8 10x10,5 10x12,7 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 0,5 - 0,8 0,7 - 1,1 in mm Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Taping Dimensions Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Allowable Range of Peak Temperature Size T (°C) t (second) t1 (second) Ø 4 ~ 6,3 250 Ø 8 x 10,5 240 Ø 10 x 10,5 235 Soldering Profile (Aluminium Electrolytic Capacitors) Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2

L L ≤ 7 L ≥ 11 Ø D 6,3 6,3 12,5 F 1,5 2,0 2,5 3,5 2,0 2,5 3,5 5,0 7,5 10,0 12,5 Ø d 0,4 0,45 0,5 0,6 0,8 1,0 aMax 1,0 2,0 in mm Dimensions for loose, long-lead type, (bulk) Order Code: LL Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range Dimensions Form Ammopack Ø D L (max) H ± 0,75 Ho ± 0,5 F ± 0,5 P ± 0,1 FF 4 ~ 6 18,5 2,5 12,7 A 18,5 3,5 12,7 4 ~ 8 17,5 12,7 B 5 ~ 6,3 18,5 20,0 18,5 A 12,5 18,5 15,0 FD 12,5 18,5 25,4 C FF 16 ~ 18 18,5 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead Code CB CC CD CE CF I 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 in mm preferred Form A Form B Form C Technical Specification Radial Type 2.5max Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2