DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
On-board low power CMOS IC Integrated shift register with constant current LED drivers Wide operating temperature range –55°C to +100°C Compact glass ceramic four-character package Series X-Y stackable Sunlight viewable 5 × 7 LED matrix displays full ASCII set Character height of 5.0 mm (0.20 in.) Wide viewing angle X Axis = ±50° Y Axis = ±65° Usable in night vision lighting applications
Applications
Avionics Communication systems Fire control systems Radar systems HCMS-235x CMOS Extended Temperature Range 5 × 7 Alphanumeric Display
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Package Dimensions Absolute Maximum Ratings Parameter Value Supply Voltage VDD to Ground –0.3V to 7.0Va a. Maximum duration 2 seconds. Data Input, Data Output, VB –0.3V to V DD Column Input Voltage, VCOL –0.3V to V DD Free Air Operating Temperature Range, TA –55°C to +100°C Storage Temperature Range, TS –55°C to +100°Cb, c b. Maximum allowable power dissipation is derived from VDD = 5.25V, VB = 2.4V, VCOL = 3.5V, 20 LEDs ON per character, 20% DF. c. HCMS-2353 derate above 71°C at 23 mW/°C, R J-A = 45°C/W. Derating based on RJ-A = 35°C/W per display for printed circuit board assembly. Maximum Allowable Package Power Dissipation, PD b, c at TA = 71°C 1.31W Through-the-Wave Solder Temperatured 250°C for 3 seconds maximum Solder Dipping Temperatured 260°C for 5 seconds maximum ESD Protection at1.5 kΩ, 100 pF V Z= 4 kV 12 11 10 9 8 7 123456 1 244.87 (0.192)REF. 2.84 (0.112)REF. CL 5.00 ± 0.13 (0.197 ± 0.005) SEE NOTE 3 20.01 (0.790) MAX. SEE NOTE 3 8.43 (0.332) PIN 1 MARKED BY DOT ON BACK OF PACKAGE 1.27 ± 0.13 (0.050 ± 0.005) 2.54 (0.100) 5.08 (0.200) 6.85 (0.270) 1.27 (0.050)TYP. TYP. 0.54 ± 0.08 (0.020 ± 0.003) 2.54 ± 0.13 (0.100 ± 0.005) NON ACCUM. TYP. 0.25 ± 0.08 (0.010 ± 0.003) 6.35 ± 0.25 (0.250 ± 0.010) HCMS-23xx XZ COO XXYY 1.78 (0.070) COLOR BIN DATE CODE 2.41 (0.095) 3.56 (0.140) 2.79 ± 0.13 (0.110 ± 0.006) 1.27 (0.050) LUMINOUS INTENSITY CATEGORY PIN 1 COLUMN 1 COLUMN 2 COLUMN 3 COLUMN 4 COLUMN 5 INT. CONNECT* DATA OUT VB V DD CLOCK GROUND DATA IN PIN FUNCTION PIN FUNCTION * DO NOT CONNECT OR USE NOTES: 1. DIMENSIONS IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE SPECIFIED, THE TOLERANCE ON ALL DIMENSIONS IS 3. CHARACTERS ARE CENTERED WITH RESPECT TO LEADS WITHIN ± 0.13 mm (± 0.005). 4. LEAD MATERIAL IS COPPER ALLOY, SOLDER DIPPED. PART NUMBER
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Recommended Operating Conditions Over Operating Range (–55°C to +100°C) Parameter Symbol Min. Typ. Max. Units Supply Voltage V DD 4.75 5.00 5.25 V Data Out Current, Low State I OL —— 1 . 6 m A Data Out Current, High State I OH —— – 0 . 5 m A Column Input Voltage V COL 2.75 3.0 3.5 V Setup Time t SETUP 10 — — ns Hold Time t HOLD 25 — — ns Clock Pulse Width High t WH(CLOCK) 50 — — ns Clock Pulse Width Low t WL(CLOCK) 50 — — ns Clock High to Low Transition t THL —— 2 0 0 n s Clock Frequency f CLOCK —5 M H z
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Electrical Characteristics Over Operating Range (–55°C to + 100°C) Parameter Symbol Test Conditions Min. Typ.a a. All typical values specified at VDD = 5.0V and TA = 25°C. Max. Units Supply Current, Dynamicb b. IDD Dynamic is the IC current while clocking column data through the on-board shift register at a clock frequency of 5 MHz, the display is not illuminated. IDDD fCLOCK = 5 MHz — 6.2 7.8 mA Supply Current, Staticc c. I DD Static is the IC current after column data is loaded and not being clocked through the on-board shift register. IDDDSoff VB = 0.4V, Data and Clock = 0.4V — 1.8 26 mA IDDDSon VB = 2.4V, Data and Clock = 0.4V — 2.2 6.0 Column Input Current I COL VB = 0.4V — — 10 µA VB = 2.4V — 500 650 mA Input Logic High Data, VB, Clock V IH VDD = 4.75V 2.0 — V Input Logic Low Data, VB, Clock V IL VDD = 5.25V — — 0.8 V Input Current I I VDD = 5.25V — µA Data Vd = 2.4V (Logic High) or d. VI represents the input voltage to an input pin. –46 –60 –103 Clock, VB Vd = 0.4V (Logic Low) –92 –120 –206 Data Out Voltage V OH VDD = 4.75V IOH = –0.5 mA ICOL = 0 mA 2.4 4.2 — V VOL VDD = 5.25V IOL = 1.6 mA ICOL = 0 mA —0 . 2 0 . 4 V Power Dissipation Per Packagee e. Four characters are illuminated with a typical ASCII character composed of 15 dots per character. PD V DD = 5.0V VCOL = 3.5V 17.5% DF VB = 2.4V
15 LEDs ON per Character
—6 6 8— m W Thermal Resistance IC Junction-to-Pinf f. IC junction temperature T J (IC) = (PD)(RθJ-PIN + RθPC-A) + TA. RθJ-PIN —1 0—° C / W Leak Rate — — 5 ×10-8 cc/second
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Optical Characteristics at TA = 25°C High Performance Green, HCMS-2353 Yellow, HCMS-2351 Description Symbol Test Conditions Min. Typ.a a. All typical values specified at VDD = 5.0V and TA = 25°C unless otherwise noted. Max. Units Peak Luminous Intensity per LEDb (Character Average) b. These LED displays are categorized for luminous intensity, with the intensity category designated by a letter code on the back of the package. IvPEAK VDD = 5.0V VCOL = 3.5V VB = 2.4V Ti = 25°Cc c. T i refers to the initial case temperature of the display immediately prior to the light measurement. 2400 3000 — µcd Dominant Wavelengthd, e d. Dominant wavelength, d, is derived from the CIE Chromaticity Diagram, and represents the single wavelength that defines the color of the device. e. Categorized for color with the color category designated by a number on the back of the package. d —5 7 4— n m Peak Wavelength PEAK —5 6 8— n m Description Symbol Test Condition Min Typ.a a. All typical values specified at VDD = 5.0V and TA = 25°C unless otherwise noted. Max. Units Peak Luminous Intensity per LEDb (Character Average) b. These LED displays are categorized for luminous intensity, with the intensity category designated by a letter code on the back of the package. IvPEAK VDD = 5.0V VCOL = 3.5V VB = 2.4V Ti = 25°Cc c. T i refers to the initial case temperature of the display immediately prior to the light measurement. 1600 2400 — mcd Dominant Wavelengthd, e d. Dominant wavelength, d, is derived from the CIE Chromaticity Diagram, and represents the single wavelength that defines the color of the device. e. Categorized for color with the color category designated by a number on the back of the package. d — — 585 — nm Peak Wavelength PEAK — — 583 — nm
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Broadcom AV02-0195EN Switching Characteristics tWH tTHL tWL 1/fCLOCK tHOLDtSETUP tPLH, tPHL tOFF tON VIH VIL VB VOH VOL 2.4 V 0.4 V 2.0 V 0.8 V VIH VIL 2.0 V 0.8 V VIH VIL 2.0 V 0.8 V CLOCK DATA IN DATA OUT 90% 10% ON (ILLUMINATED) OFF (NOT ILLUMINATED) DISPLAY Parameter Condition Typ. Max. Units fclock CLOCK Rate — 5 MHz tPLH, tPHL Propgation Delay CLOCK to DATA OUT CL = 15 pf RL = 2.4 kΩ —1 0 5n s tOFF VB (0.4V) to Display OFF 45 µ s tON VB (2.4V) to Display ON
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Broadcom AV02-0195EN Electrical Description The display contains four 5 x 7 LED dot matrix characters and two CMOS integrated circuits, as shown in Figure 1. The two CMOS integrated circuits form an on-board 28-bit serial-in/parallel-out shift register that accepts standard TTL logic levels. The Data Input, pin 12, is connected to bit position 1 and the Data Output, pin 7, is connected to bit position 28. The shift register puts out control constant current sinking LED row drivers. A logic 1 stored in the shift register enables the corresponding LED row driver and a logic 0 stored in the shift register disables the corresponding LED row driver. The electrical configuration of these CMOS IC alphanumeric displays allows for an effective interface to a display controller circuit, which supplies decoded character information. The row data for a given column (one 7-bit byte per character) is loaded (bit serial) into the on-board 28-bit shift register with high-to-low transitions of the clock input. To load decoded character information into the display, column data for character 4 is loaded first, and the column data for character 1 is loaded last in the following manner. The 7 data bits for column 1, character 4, are loaded into the on-board shift register. Next, the 7 data bits for column 1, character 3, are loaded into the shift register, shifting the character 4 data over one character position. This process is repeated for the other two characters until all 28 bits of column data (four 7-bit bytes of character column data) are loaded into the on-board shift register. Then the column 1 input, V COL pin 1, is energized to illuminate column 1 in all four characters. This process is repeated for columns 2, 3, 4, and 5. All V COL inputs should be at logic low to ensure that the display is off when loading data. The display is blank when the blanking input VB, pin 8, is at logic low regardless of the outputs of the shift register or whether one of the VCOL inputs is energized. Refer to Application Note 1016 for drive circuit information. Figure 1: Display Block Diagram ROWS 1-7 CONSTANT CURRENT SINKING LED DRIVERS COLUMN DRIVE INPUTS COLUMN ROWS LED MATRIX ROWS 8-14 CLOCK ROWS 1-7 LED MATRIX ROWS 15-21 ROWS 1-7 LED MATRIX ROWS 22-282 3 4 5 6 7 12345 12345 28-BIT SIPO SHIFT REGISTER SERIAL DATA OUTPUT SERIAL DATA INPUT BLANKING CONTROL, V B
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Broadcom AV02-0195EN ESD Susceptibility The display has an ESD susceptibility rating of Class 3 of MIL-STD-883E, HBM. Take normal CMOS handling precautions when handling these devices. Soldering and Post Solder Cleaning These displays may be soldered with a standard wave solder process using either an RMA flux and solvent cleaning or an OA flux and aqueous cleaning. For optimum soldering, the solder wave temperature should be 245°C, and the dwell time for any display lead passing through the wave should be 1.5 to 2 seconds. For more detailed information, refer to Application Note 1027, Soldering LED Components. Contrast Enhancement When used with the proper contrast enhancement filters, the display is readable in sunlight. Refer to Application Note 1029, Luminous Contrast and Sunlight Readability of the HDSP-235X Series Alphanumeric Displays for Sunlight Viewable Applications, for information on contrast enhancement for sunlight and daylight ambient. Refer to Application Note 1015, Contrast Enhancement Techniques for LED Displays, for information on contrast enhancement in moderate ambients. Night Vision Lighting When used with the proper NVG/DV filters, the HCMS-235x display may be used in night vision lighting applications. For a list of NVG/DV filters and a description on night vision lighting technology, refer to Application Note 1030, LED Displays and Indicators and Night Vision Imaging System Lighting. Controller Circuits, Power Calculations, and Display Dimming Refer to Application Note 1016, Using the HDSP-2000 Alphanumeric Display Family, for information on controller circuits to drive these displays, how to do power calculations, and a technique for display dimming. Figure 2: Peak Column Current vs. Column Voltage at TA = 25°C 100 200 300 400 500 600 0123456 V COL - COLUMN VOLTAGE - V ICOL - PEAK COLUMN CURRENT - mA
HCMS-235x Data Sheet CMOS Extended Temperature Range 5 × 7 Alphanumeric Display Intensity Bin Limits Intensity Bin Limits for HCMS-2351 Intensity Bin Limits for HCMS-2353 Color Bin Limits NOTE: Test conditions as specified in Optical Characteristics at TA = 25°C. Bin Intensity Range (mcd) Min. Max. Q 11.197 15.774 R 13.437 19.718 S 16.797 23.662 T 20.156 29.577 U 25.195 35.492 Bin Intensity Range (mcd) Min. Max. S 16.797 23.662 T 20.156 29.577 U 25.195 35.492 V 30.234 44.366 W 37.739 52.239 Color Color Bin QA Min. Max. Yellow 3 581.5 585.0 4 584.0 587.5 5 586.5 590.0 6 589.0 592.5 7 591.5 595.0 Green 1 576.0 580.0 2 573.0 577.0 3 570.0 574.0 4 567.0 571.0 Option Code Definition H C M S-235x-x 1 x2 x3 xx lv Bin Range Identifier x1 x2 x1 Minimum Iv bin x2 Maximum Iv bin Color Bin Range Identifier x3 A Color bin 2 or 3 B Color bin 4 or 5 C Color bin 5 or 6 D Color bin 3 or 4
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries, and/or the EU. Copyright © 2008–2019 Broadcom. All Rights Reserved. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.