HCF4010B_01 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

n PROPAGATION DELAY TIME : tPD = 50ns (Typ.) at VDD = 10V CL = 50pF n HIGH TO LOW LEVEL LOGIC CONVERSION n MULTIPLEXER: 1 TO 6 OR 6 TO 1 n HIGH ”SINK” AND ”SOURCE” CURRENT CAPABILITY n QUIESCENT CURRENT SPECIFIED UP TO 20V n 5V, 10V AND 15V PARAMETRIC RATINGS n INPUT LEAKAGE CURRENT II= 100nA (MAX) AT VDD = 18V TA =2 5°C n 100% TESTED FOR QUIESCENT CURRENT n MEETS ALL REQUIREMENTS OF JEDEC JESD13B ” STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES”

DESCRIPTION

The HCF4010B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. It is an non inverting Hex Buffer/Converter and can be used as CMOS to TTL logic level converter as current ”sink” or ”source” driver or as multiplexer (1 to 6). It is a preferred replacement of HCF4050B in buffer applications. HCF4010B HEX BUFFER/CONVERTER (NON INVERTING) PIN CONNECTION ORDER CODES PACKAGE TUBE T & R DIP HCF4010BEY SOP HCF4010BM1 HCF4010M013TR DIP SOP

INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION TRUTH TABLE ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to V SS pin voltage. RECOMMENDED OPERATING CONDITIONS PIN No SYMBOL NAME AND FUNCTION 3, 5, 7, 9, 11, A, B, C, D, E, F Data Inputs 2, 4, 6, 10, 12, 15 G, H, I, J, K, L Data Outputs

13 NC Not Connected

1 VCC Positive Supply Voltage

8 VSS Negative Supply Voltage

16 VDD Positive Supply Voltage

A, B, C, D, E, F G, H, I, J, K, L LL HH Symbol Parameter Value Unit V DD Supply Voltage -0.5 to +22 V V I DC Input Voltage -0.5 to V DD + 0.5 V II DC Input Current ± 10 mA PD Power Dissipation per Package 200 mW Power Dissipation per Output Transistor 100 mW Top Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Symbol Parameter Value Unit V DD Supply Voltage 3t o2 0 V V I Input Voltage 0 to V DD V Top Operating Temperature -55 to 125 °C

The Noise Margin for both ”1” and ”0” level is: 1V min. with VDD =5V, 2V min. with VDD =10V, 2.5V min. with VDD =15V Symbol Parameter Test Condition Value UnitVI (V) VO (V) |IO | (µA) VDD VCC (V) TA =2 5°C -40 to 85°C -55 to 125°C IL Quiescent Current 0/5 5 0.02 1 30 30 µA0/10 10 0.02 2 60 60 0/15 15 0.02 4 120 120 0/20 20 0.04 20 600 600 V OH High Level Output Voltage 0/5 <1 5 4.95 4.95 4.95 V0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 VOL Low Level Output Voltage 5/0 <1 5 0.05 0.05 0.05 V10/0 <1 10 0.05 0.05 0.05 15/0 <1 15 0.05 0.05 0.05 VIH High Level Input Voltage V1/9 <1 10 7 7 7 1.5/13.5 <1 15 11 11 11 VIL Low Level Input Voltage V9/1 <1 10 3 3 3 13.5/1.5 <1 15 4 4 4 IOH Output Drive Current IOL Output Sink Current 0/5 0.4 <1 5 3 4 2.4 2.4 mA0/10 0.5 <1 10 8 10 6.4 6.4 0/15 1.5 <1 15 24 36 19 19 II Input Leakage Current 0/18 Any Input 18 ±10-5 ±0.1 ±1 ±1 µA C I Input Capacitance Any Input 5 7.5 pF

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb =2 5°C, CL = 50pF, RL = 200KΩ ,tr =tf= 20 ns) (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. TEST CIRCUIT C L = 50pF or equivalent (includes jig and probe capacitance) R L = 200KΩ R T =Z OUT of pulse generator (typically 50Ω ) Symbol Parameter Test Condition Value (*) Unit V DD (V) V I(V) V CC (V) Min. Typ. Max. tTLH Output Transition Time 5 5 5 150 350 ns10 10 10 75 15 15 15 15 55 110 tTHL Output Transition Time 5 5 5 35 70 ns10 10 10 20 40 15 15 15 15 30 tPLH Propagation Delay Time 5 5 5 100 200 ns 10 10 10 50 100 10 10 5 50 100 15 15 15 35 70 15 15 5 35 70 tPHL Propagation Delay Time 5 5 5 65 130 ns 10 10 10 35 70 10 10 5 30 70 15 15 15 25 50 15 15 5 20 40

WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)

DIM. mm. inch a1 0.51 0.020 B 0.77 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 0.050 Plastic DIP-16 (0.25) MECHANICAL DATA P001C

DIM. mm. inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.62 0.024 S8 ° (max.) SO-16 MECHANICAL DATA PO13H

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.  The ST logo is a registered trademark of STMicroelectronics  2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom  http://w ww.st.com