HCF40107B_02 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

■ 32 TIMES STANDARD B-SERIES OUTPUT CURRENT DRIVE SINKING CAPABILITY - 136 mA TYP . AT V DD = 10V, VDS = 1V ■ QUIESCENT CURRENT SPECIF. UP TO 20V ■ 5V, 10V AND 15V PARAMETRIC RATINGS ■ INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT VDD = 18V TA = 25°C ■ 100% TESTED FOR QUIESCENT CURRENT ■ MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES"

DESCRIPTION

HCF40107B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. HCF40107B is a dual 2-input NAND buffer/driver containing two independent 2-input NAND buffers with open-drain single n-channel transistor outputs. This device features a wired-OR capability and high output sink current capability (136 mA typ. at V DD = 10V, VDS = 1V). HCF40107B DUAL 2-INPUT NAND BUFFER/DRIVER PIN CONNECTION ORDER CODES PACKAGE TUBE T & R DIP HCF40107BEY SOP HCF40107BM1 HCF40107M013TR DIP SOP

INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION FUNCTIONAL DIAGRAM TRUTH TABLE * : Requires external and pull-up resistor (RL) to VDD . # : Without pull-up resistor (3-state). PIN No SYMBOL NAME AND FUNCTION 2, 1, 7, 6 A, B, D, E Input 3, 5 C,F Outputs

4 VSS Negative Supply Voltage

8 V DD Positive Supply Voltage

LL H * Z# HL H * Z# LH H * Z# HHL

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit VDD Supply Voltage -0.5 to +22 V VI DC Input Voltage -0.5 to V DD + 0.5 V II DC Input Current ± 10 mA PD Power Dissipation per Package 200 mW Power Dissipation per Output Transistor 100 mW Top Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Symbol Parameter Value Unit VDD Supply Voltage 3 to 20 V VI Input Voltage 0 to V DD V Top Operating Temperature -55 to 125 °C

The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD =10V, 2.5V min. with VDD =15V Measured with external pull-up resistor, RL = 10kΩ to VDD . * Forced output disabled. DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ , tr = tf = 20 ns) (*) RL is external pull-up resistor to VDD. Symbol Parameter Test Condition Value UnitVI (V) VO (V) |IO | (µA) VDD (V) TA = 25°C -40 to 85°C -55 to 125°C IL Quiescent Current 0/5 5 0.02 5 150 30 µA0/10 10 0.02 10 300 60 0/15 15 0.02 20 600 120 0/20 20 0.04 100 3000 600 V IH High Level Input Voltage V1/9 <1 10 7 7 7 1.5/13.5 <1 15 11 11 11 VIL Low Level Input Voltage V9/1 <1 10 3 3 3 13.5/1.5 <1 15 4 4 4 IOL Output Sink Current 5 0.4 5 21 32 16 12 mA 51 5 4 4 6 8 3 0 2 5 10 0.5 10 49 74 37 28 10 1 10 89 136 68 51 15 0.5 15 66 100 50 38 I OH Output Drive Current No Internal Pull-up Device mA IIH, IIL Input Leakage Current 0/18 Any Input 18 ±10-5 ±0.1 ±0.1 ±1 µA IOH, IOL *** 3-State Output Leakage Current 0/18 18 18 ±10-4 22 2 0 µA C I Input Capacitance Any Input 5 7.5 pF C O Output Capacitance Any Output 30 pF Symbol Parameter Test Condition Value (*) Unit VDD (V) Min. Typ. Max. tPHL tPLH Propagation Delay Time High to Low R L* = 120Ω 100 200 ns10 45 90 15 30 60 Low to High 5 R L* = 120Ω 100 200 ns10 60 120 15 50 100 tTHL tTLH Transition Time High to Low R L* = 120Ω 50 100 ns10 20 40 15 10 20 Low to High 5 R L* = 120Ω 50 100 ns10 35 70 15 25 50

Line-driver Circuit. Interface of 40107B with Triac, with COS/MOS Component and Triac isolated. Direct Dc Driver Interface of 40107B with a Triac. A 2.2-watt Incandescent Lamp-driver Circuit. Solenoid Driver Circuit

Motor-controller Circuit Led Driver Circuit TEST CIRCUIT C L = 50pF or equivalent (includes jig and probe capacitance) R L = 200KΩ R T = ZOUT of pulse generator (typically 50Ω ) A B MOTOR FUNCTION LL O F F H L COUNTER CLOCKWISE H H AS PREVIOUS STATE L H CLOCKWISE H H AS PREVIOUS STATE INHIBIT ENABLE OUTPUT L L OFF H L OFF L H OFF LH O N

WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)

DIM. mm. inch A 3.3 0.130 a1 0.7 0.028 B 1.39 1.65 0.055 0.065 B1 0.91 1.04 0.036 0.041 b 0.5 0.020 b1 0.38 0.5 0.015 0.020 D 9.8 0.386 E 8.8 0.346 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 7.1 0.280 I 4.8 0.189 L 3.3 0.130 Z 0.44 1.6 0.017 0.063 Plastic DIP-8 MECHANICAL DATA P001F

DIM. mm. inch A 1.75 0.068 a1 0.1 0.25 0.003 0.009 a2 1.65 0.064 a3 0.65 0.85 0.025 0.033 b 0.35 0.48 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.25 0.5 0.010 0.019 c1 45˚ (typ.) D 4.8 5.0 0.189 0.196 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 3.81 0.150 F 3.8 4.0 0.149 0.157 L 0.4 1.27 0.015 0.050 M 0.6 0.023 S ˚ (max.) SO-8 MECHANICAL DATA 0016023

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com