HCF40106B_04 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

I SCHMITT TRIGGER ACTION WITH NO EXTERNAL COMPONENTS I HYSTERESIS VOLTAGE (Typ.): 0.9V at V DD =5 V 2.3V at VDD =1 0 V 3.5V at VDD =1 5 V I NOISE IMMUNITY GREATER THAN 50% I NO LIMIT ON INPUT RISE AND FALL TIME I LOW V DD TO V SS CURRENT DURING SLOW INPUT RAMP I STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS I QUIESCENT CURRENT SPECIFIED UP TO 20V I 5V, 10V AND 15V PARAMETRIC RATINGS I INPUT LEAKAGE CURRENT I I= 100nA (MAX) AT VDD =1 8 VTA = 25°C I 100% TESTED FOR QUIESCENT CURRENT

DESCRIPTION

The HCF40106B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF40106B consist of six Schmitt trigger circuits. Each circuit functions as an inverter with Schmitt trigger action on the input. The trigger switches at different points for positive and negative going signals. The difference between the positive going voltage (V P) and the negative going voltage (VN ) is defined as hysteresis voltage (VH ). HCF40106B HEX SCHMITT TRIGGER PIN CONNECTION ORDER CODES PACKAGE TUBE T & R DIP HCF40106BEY SOP HCF40106BM1 HCF40106M013TR DIP SOP

INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION TRUTH TABLE FUNCTIONAL DIAGRAM PIN N° SYMBOL NAME AND FUNCTION 1, 3, 5, 9, 11, A, B, C, D, E, F Data Inputs 2, 4, 6, 8, 10, G, H, I, J, K, L Data Outputs

7 VSS Negative Supply Voltage

14 VDD Positive Supply Voltage

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit VDD Supply Voltage -0.5 to +22 V VI DC Input Voltage -0.5 to V DD +0 . 5 V II DC Input Current ± 10 mA PD Power Dissipation per Package 200 mW Power Dissipation per Output Transistor 100 mW Top Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Symbol Parameter Value Unit VDD Supply Voltage 3t o2 0 V VI Input Voltage 0 to V DD V Top Operating Temperature -55 to 125 °C

The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD =10V, 2.5V min. with VDD =15V DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ ,tr =tf=2 0n s ) (*) Typical temperature coefficient for all VDD value is 0.3%/°C. Symbol Parameter Test Condition Value UnitVI (V) VO (V) |IO | (µA) VDD (V) TA = 25°C -40 to 85°C -55 to 125°C IL Quiescent Current 0/5 5 0.02 1 30 30 µA0/10 10 0.02 2 60 60 0/15 15 0.02 4 120 120 0/20 20 0.04 20 600 600 V OH High Level Output Voltage 0/5 <1 5 4.95 4.95 4.95 V0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 VOL Low Level Output Voltage 5/0 <1 5 0.05 0.05 0.05 V10/0 <1 10 0.05 0.05 0.05 15/0 <1 15 0.05 0.05 0.05 VP Positive Trigger Threshold Voltage VN Negative Trigger Threshold Voltage 15 4 5.8 7.4 4 7.4 4 7.4 1 5 1 . 6 3 . 551 . 651 . 65 IOH Output Drive Current IOL Output Sink Current 0/5 0.4 5 0.44 1 0.36 0.36 II Input Leakage Current 0/18 Any Input 18 ±10-5 ±0.1 ±1 ±1 µA C I Input Capacitance Any Input 5 7.5 pF Symbol Parameter Test Condition Value (*) Unit VDD (V) Min. Typ. Max. tPLH tPHL Propagation Delay Time 5 140 280 ns10 70 140 15 60 120 tTLH tTHL Output Transition Time 5 100 200 ns10 50 100 15 40 80

ASTABLE MULTIVIBRATOR MONOSTABLE MULTIVIBRATOR WAVE SHAPER

C L = 50pF or equivalent (includes jig and probe capacitance) R L =2 0 0 KΩ R T =Z OUT of pulse generator (typically 50Ω ) WAVEFORM: PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)

DIM. mm. inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 Plastic DIP-14 MECHANICAL DATA P001A

DIM. mm. inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S˚ ( m a x . ) SO-14 MECHANICAL DATA PO13G

DIM. mm. inch A 330 12.992 C 12.8 13.2 0.504 0.519 D 20.2 0.795 N 60 2.362 T 22.4 0.882 Ao 6.4 6.6 0.252 0.260 Bo 9 9.2 0.354 0.362 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 Tape & Reel SO-14 MECHANICAL DATA

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2004 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com