HCC40101B STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

9-BIT PARITY GENERATOR/CHECKER .STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS .QUIESCENT CURRENT SPECIFIED AT 20V FOR HCC DEVICE .5V, 10V, AND 15V PARAMETRIC RATINGS .INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE .100% TESTED FOR QUIESCENT CURRENT .MEETS ALL REQUIREMENTS OF JEDECTEN- TATIVE STANDARDN °13A, ”STANDARD SPE- CIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES”

DESCRIPTION

The HCC40101B (extended temperature range) and HCF40101B (intermediate temperature range) are monolithic integrated circuits, available in 14- lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF40101B is a 9-bit (8 data bits plus 1 parity bit) parity generator/checker. It may be used to detect errors in data transmission or data retrie- val. Odd and even outputs facilitate odd or even parity generation and checking. When used as a parity generator, a parity bit is supplied along with the data to generate an even or odd parity output. When used a parity checker, the received data bits and parity bits are compared for correct parity. The even or odd outputs are used to indicate an error in the received data. Word-length capability is expan- dable by cascading. TheHCC/HCF40101B is also provided with an inhibit control. If the inhibit control is set at logical ”1”, the even and odd outputs go to a logical ”0”. EY (Plastic Package) F (Ceramic Frit Seal Package) (Micro Package) (Plastic Chip Carrier) ORDER CODES : HCC4010 1BF HCF40101BM1 HCF40101B EY HCF40101BC1 PIN CONNECTIONS

Symbol Parameter Value Unit V DD * Supply Voltage :HCC Types HCF Types – 0.5 to + 20 – 0.5 to + 18 V V V i Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA P tot Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 100 mW mW T op Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 T stg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages are with respect to V SS (GND). FUNCTIONAL DIAGRAM RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V DD Supply Voltage :HCC Types HCF Types 3t o1 8 3t o1 5 V V V I Input Voltage 0 to V DD V T op Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 HCC/HCF40101B

∑ 1’s = Even 0 1 0 ∑ 1 ’ s = O d d 001 X 100 X = Don’t Care Logic 1 = High Logic 0 = Low. TRUTH TABLE HCC/HCF40101B

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Value V I V O |IO |V DD T Low * 25 °CT High *Symbol Parameter Unit IL Quiescent Current HCC Types 0/ 5 5 5 0.04 5 150 µA 0/10 10 10 0.04 10 300 0/15 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 HCF Types 0/ 5 5 20 0.04 20 150 0/10 10 40 0.04 40 300 0/15 15 80 0.04 80 600 V OH Output High Voltage 0/ 5 < 1 5 4.95 4.95 4.95 V0/10 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 14.95 14.95 V OL Output Low Voltage 5/0 < 1 5 0.05 0.05 0.05 V10/0 < 1 10 0.05 0.05 0.05 15/0 < 1 15 0.05 0.05 0.05 V IH Input High Voltage V1/9 < 1 10 7 7 7 1.5/13.5 < 1 15 11 11 11 V IL Input Low Voltage V9/1 < 1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 IOH Output Drive Current HCC Types mA HCF Types I OL Output Sink Current HCC Types 0/ 5 0.4 5 0.64 0.51 1 0.36 mA HCF Types 0/ 5 0.4 5 0.52 0.44 1 0.36 I IH,IIL Input Leakage Current HCC Types 0/18 Any Input µAHCF Types 0/15 15 ± 0.3 ±10–5 ± 0.3 ± 1 C I Input Capacitance Any Input 5 7.5 pF *T Low =–5 5 °Cf o rHCC device : – 40°Cf o rHCF device. *T High = + 125°Cf o rHCC device : + 85°Cf o rHCF device. HCC/HCF40101B

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb =2 5°C, CL = 50pF, RL = 200kΩ , typical temperature coefficient for all VDD values is 0.3%/°C, all input rise and fall time = 20ns) Test Conditions Value Symbol Parameter V DD (V) Min. Typ. Max. Unit tPLH , tPH L Propagation Delay Time 5 350 700 ns10 150 300 15 100 200 tPLH , tPH L Propagation Delay Time Inhibit to Output 51 4 0 2 8 0 ns10 70 140 15 50 100 t TLH , tTHL Transition Time 5 100 200 ns10 50 100 15 40 80 Output Low (sink) Current Characteristics. Output High (source) Current Characteristics. Typical Propagation Delay Time vs. Load Capacit- ance. Typical Transition Time vs. Load Capacitance. HCC/HCF40101B

Typical Dynamic power Dissipation vs. Input Frequency. TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. Dynamic Power Dissipation. HCC/HCF40101B

Plastic DIP14 MECHANICAL DATA DIM. mm inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 P001A HCC/HCF40101B

Ceramic DIP14/1 MECHANICAL DATA DIM. mm inch A 20 0.787 B 7.0 0.276 D 3.3 0.130 E 0.38 0.015 e3 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N 10.3 0.406 P 7.8 8.05 0.307 0.317 Q 5.08 0.200 P053C HCC/HCF40101B

DIM. mm inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S8 ° (max.) P013G HCC/HCF40101B

DIM. mm inch A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A HCC/HCF40101B

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specificationsmentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronicsproducts are not authorized foruse ascritical componentsin life support devices or systems without express written approval of SGS-THOMSON Microelectonics.  1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A HCC/HCF40101B