HCC4000B_11 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 24

Technical content

Datasheet sections

  • 1 HCC family overview
  • 2 Input equivalent circuit diagram
  • 3 Maximum rating
  • 3.1 Recommended operating conditions
  • 4 Package mechanical data
  • 5 Order codes
  • 6 Revision history

Features

■ 3 to 20 V max operating voltage ■ Bufferized inputs and outputs ■ Standardized symmetrical outputs characteristic ■ 50 ns typical propagation delays ■ 100 nA max 25 °C input current ■ 100% tested 20 V quiescent current ■ 5-10-15 V parametric testing ■ Hermetic packages ■ Rad-hard 100 kRad TID at 11rad/sec dose rate ■ SEL-SEU immune to 72 MeV/cm²/mg LET ions ■ ESCC qualified

Description

The HCC40xxx and HCC45xxx series are composed of over 70 types of high voltage CMOS functions, offering a set of highly noise tolerant gates, Flip-Flops, multiplexers, counters, bus interfaces and several other functions. The radiation hardness, the single event latch-up (SEL) and the single event upset (SEU) immunity and the housing in hermetic packages of all types of both series make them usable in the most difficult environmental conditions. The complete specification of each type is available from the European Space Components Coordination web site (ESCC): https://spacecomponents.org/. ST guarantees full compliance of qualified parts with these ESCC detailed specifications. Flat-14 Flat-16 Flat-24 DIL-14 DIL-16 DIL-24 The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package.

1 HCC family overview

Table 1. Device summary

Table 1. Device summary (continued)

2 Input equivalent circuit diagram

Figure 1. Input equivalent circuit diagram

3 Maximum rating

extended periods may affect device reliability. Note: All voltage values are referred to V SS pin voltage.

3.1 Recommended operating conditions

Table 2. Absolute maximum ratings Table 3. Recommended operating conditions

HCC4xxx Package mechanical data Doc ID 17102 Rev 3 9/24

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 2. Ceramic Flat-14 mechanical drawings the electrical characteristics. Table 4. Ceramic Flat-14 mechanical data

Figure 3. Ceramic DIL-14 mechanical drawings the electrical characteristics. Table 5. Ceramic DIL-14 mechanical data

Figure 4. Ceramic Flat-16 mechanical drawings the electrical characteristics. Table 6. Ceramic Flat-16 mechanical data

Figure 5. Ceramic DIL-16 package drawings the electrical characteristics. Table 7. Ceramic DIL-16 package dimensions

Figure 6. Ceramic Flat-24 package drawings the electrical characteristics. Table 8. Ceramic Flat-24 package dimensions

Figure 7. Ceramic DIL-24 package drawings the electrical characteristics. Table 9. Ceramic DIL-24 package dimensions

5 Order codes

Table 10. Ordering information

Table 10. Ordering information (continued)

6 Revision history

Table 11. Document revision history connections” diagram on the coverpage.