M54HC4051 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

SINGLE 8 CHANNEL, DUAL 4 CHANNEL, TRIPLE 2 CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER: B1R (Plastic Package) ORDER CODES : M54HCXXXXF1R M74HCXXXXM1R M74HCXXXXB1R M74HCX XXXC1R F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) PIN CONNECTION (top view) HC4053HC4052HC4051 These devices are analog multiplexer demultiplexers in high speed silicon gate C2MOS technology and they are pin compatible with the equivalent metal gate CMOS ”4000B” series. These analog switches are bidirectional and digitally controlled. A built-in level shifting is included to allow them an input range of up to± 6V (peak) for an analog signal with digital control signal of 0 to 6V. V EE supply pin is provided for analog input signals. They have an inhibit (INH) input terminal to disable all the switcheswhen high. For operation as a digital multiplexer/demultiplexer, V EE is connected to GND.

DESCRIPTION

.LOW POWER DISSIPATION ICC =4 µA (MAX.) AT TA =2 5oC .LOGIC LEVEL TRANSLATION TO ENABLE 5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL .LOW ”ON” RESISTANCE: 70Ω TYP. (VCC -V EE = 4.5 V) 50Ω TYP. (VCC -V EE =9V ) .WIDE ANALOG INPUT VOLTAGE RANGE: ±6V .FAST SWITCHING: tpd = 15 ns (TYP.) AT TA =2 5oC .LOW CROSSTALK BETWEEN SWITCHES .HIGH ON/OFF OUTPUT VOLTAGE RATIO .WIDE OPERATING VOLTAGE RANGE CC -VEE ) = 2V TO 12V .LOW SINE WAVE DISTORTION 0.02% AT VCC -VEE =9 V .HIGH NOISE IMMUNITY VNIH =V NIL =2 8%V CC (MIN.) .PIN AND FUNCTION COMPATIBLE WITH HCC/HCF4051/4052/4053B

The HC4051 is a single 8 channel multiplexer demultiplexer having three binary control inputs A, B and C to select 1 of 8 to be turned on, and connected to the output. The HC4052 has a pair of four channel multiplexer demultiplexer having two control inputs A and Bthat select one of four channels of the two sections. The HC4053 is a triple two channel multiplexer demultiplexer having three separate digital control inputs A, B and C to select independently one of a pair of channles. CHIP CARRIER HC4053HC4052HC4051 TRUTH TABLE (HC4051) INPUT STATES ”ON” CHANNEL INHIBIT C B A LL L L 0 LL L H 1 LL H L 2 LL H H 3 LH L L 4 LH L H 5 LH H L 6 LH H H 7 H X X X NONE X: DON’T CARE TRUTH TABLE (HC4052) INPUT STATES ”ON” CHANNELS INHIBIT B A L L L 0X, 0Y L L H 1X, 1Y L H L 2X, 2Y L H H 3X, 3Y H X X NONE X: DON’T CARE TRUTH TABLE (HC4053) INPUT STATES ”ON” CHANNELS INHIBIT A or B or C L L ax or bx or cx L H ay or by or cy H X NONE X: DON’T CARE M54/M74HC4051/4052/4053

PIN DESCRIPTION (HC4051) PIN No SYMBOL NAME AND FUNCTION

3 COM

6 INH INHIBIT Input

7V EE Negative Supply Voltage 11, 10, 9 A, B, C Select Inputs 13, 14, 15, 12, 1, 5, 2, 4

0 TO 7 Independent Input/Outputs

8 GND Ground (0V)

16 V CC Positive Supply Voltage

PIN DESCRIPTION (HC4053) PIN No SYMBOL NAME AND FUNCTION 2, 1 bx, by Independent Input/Outputs 5, 3 cx, cy Independent Input/Outputs 7V EE Negative Supply Voltage 11, 10, 9 A, B, C Select Inputs 12, 13 ax, ay Independent Input/Outputs 14, 15, 4 ax TO cy Common Output/input PIN DESCRIPTION (HC4052) PIN No SYMBOL NAME AND FUNCTION 1, 5, 2, 4 0Y TO 3Y Independent Input/Outputs EE Negative Supply Voltage 10, 9 A, B Select Inputs 12, 14, 15, 0X TO 3X Independent Input/Outputs

3 COM Y

13 COM X

Symbol Parameter Value Unit VCC Supply Voltage Range -0.5 to +7 V VCC -VEE Supply Voltage Range -0.5 to 13 V VIN Control Input Voltage -0.5 to V CC + 0.5 V VI/O Switch I/O Voltage V EE - 0.5 to VCC + 0.5 V ICK Control Input Diode Current ± 20 mA IIOK I/O Diode Current ± 20 mA IT Switch Through Current ± 25 mA ICC DC V CC or Ground Current ± 50 mA P D Power Dissipation 500 (*) mW Tstg Storage Temperature -65 to +150 oC TL Lead Temperature (10 sec) 300 oC Absolute Maximum Ratings arethose values beyond whichdamage tothe device mayoccu r. Functional operation under these conditions is not implied. (*) 500 mW:≅ 65 oC derate to 300 mW by 10mW/oC: 65oCt o 8 5oC M54/M74HC4051/4052/4053

RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit VCC Supply Voltage 2 to 6 V VEE Supply Voltage -6 to 0 V VCC -VEE Supply Voltage 2 to 12 V VIN Input Voltage 0 to V CC V VI/O Input/Output Voltage V EE to VCC V Top Operating Temperature: M54HC Series M74HC Series -55 to +125 -40 to +85 oC oC tr,tf Input Rise and Fall Time V CC = 2 V 0 to 1000 ns VCC = 4.5 V 0 to 500 VCC = 6 V 0 to 400 DC SPECIFICATIONS Symbol Parameter Test Conditions Value UnitVCC (V) VEE (V) TA =2 5oC 54HC and 74HC -40 to 85oC 74HC -55 to 125oC 54HC VIHC High Level Control Input Voltage 2.0 1.5 1.5 1.5 V4.5 3.15 3.15 3.15 6.0 4.2 4.2 4.2 V ILC Low Level Control Input Voltage 2.0 0.5 0.5 0.5 V4.5 1.35 1.35 1.35 6.0 1.8 1.8 1.8 R ON ON Resistance 4.5 GND V IN =V IHC or VILC VI/O =V CC to VEE II/O≤ 2m A 85 180 225 270 Ω 4.5 -4.5 55 120 150 180 6.0 -6.0 50 100 125 150

2.0 GND V

IN =V IHC or VILC VI/O =V CC or VEE II/O≤ 2m A 150

4.5 GND 70 150 190 230

4.5 -4.5 50 100 125 150 6.0 -6.0 45 80 100 120 ΔR ON Difference of ON Resistance Between Switches

4.5 GND VIN =V IHC or VILC

VI/O =V CC or VEE II/O≤ 2m A 10 30 35 45 Ω4.5 -4.5 5 12 15 18 6.0 -6.0 5 10 12 15 IOFF Input/Output Leakage Current (SWITCH OFF)

6.0 GND V

OS =V CC or GND V IS = GND or VCC VIN =V ILC or VIHC ±0.06 ±0.6 ±1.2 µA 6.0 -6.0 ±0.1 ±1 ±2 IIZ Switch Input Leakage Current (SWITCHON, OUTPUT OPEN)

6.0 GND V OS =V CC or

VIN =V IHC or VILC ±0.06 ±0.6 ±1.2 µA 6.0 -6.0 ±0.1 ±1 ±2 IIN Control Input Current 6.0 GND VIN =V CC or GND ±0.1 ±0.1 ±1 µA ICC Quiescent Supply Current

6.0 GND VIN =V CC or GND 44 0 8 0 µA

6.0 -6.0 8 80 160 M54/M74HC4051/4052/4053

AC ELECTRICAL CHARACTERISTICS (CL =5 0p F ,I n p u ttr =t f =6n s ) Symbol Parameter Test Conditions Value UnitVCC (V) VEE (V) TA =2 5oC 54HC and 74HC -40 to 85oC 74HC -55 to 125oC 54HC Φ I/O Phase Difference Between Input and Output

2.0 GND 25 60 75 90

ns4.5 GND 6 12 15 18

6.0 GND 5 10 13 15

4.5 -4.5 4 t PZL tPZH Output Enable Time (for 4051/40 52)

2.0 GND R

L =1 KΩ 64 225 280 340 ns4.5 GND 18 45 56 68

6.0 GND 15 38 48 58

4.5 -4.5 18 t PZL tPZH Output Enable Time (for 4053)

2.0 GND R L =1 KΩ 50 225 280 340

ns4.5 GND 14 45 56 68

6.0 GND 12 38 48 58

4.5 -4.5 14 tPLZ tPHZ Output Disable Time (for 4051/4052) L =1 KΩ 100 250 315 375 ns4.5 GND 33 50 63 7

6.0 GND 28 43 54 64

4.5 -4.5 29 tPLZ tPHZ Output Disable Time (for 4053) L =1 KΩ 95 225 280 340 ns4.5 GND 30 45 56 68

6.0 GND 26 38 48 58

4.5 -4.5 26 C IN Input Capacitance 5 10 10 10 pF C I/O Common Terminal Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 pF C I/O Switch Terminal Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 pF C IOS Feed Through Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 0.95 0.85 0.75 pF C PD (*) Power Dissipation Capacitance

5.0 GND HC4051

(*) CPD is defined as the value of the IC’s internal equivalent capac itance which is calculated from the operating current consump tion without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC (opr) = CPD •VCC •fIN +ICC M54/M74HC4051/4052/4053

ANALOG SWITCH CHARACTERISTICS (GND = 0 V TA =2 5 oC) Symbol Parameter Test Conditions Value UnitVCC (V) VEE (V) VIN (Vp-p) Typ. Sine Wave Distortion 2.25 2.25 4 f IN = 1 KHz R L =1 0K Ω C L = 50 pF 0.025 %4.5 -4.5 8 0.020 6.0 -6.0 11 0.018 fMAX Frequency Response (Switch ON) 2.25 -2.25 Adjust fIN voltage to Obtain 0 dBm at VOS . Increase fIN Frequency until dB Meter Reads -3dB R L =5 0Ω C L =1 0p F f IN = 1 KHz sine wave ALL (*) 120 MHz HC4051 () HC4052 () HC4053 () HC4051 () HC4052 () HC4053 () 110 150 HC4051 () HC4052 () HC4053 (**) 140 190 Feedthrough Attenuation (Switch OFF) 2.25 -2.25 V IN is centered at (VCC -V EE )/2. Adjust input for 0 dBm R L = 600Ω C L =5 0p F fIN = 1 KHz sine wave -50 dB4.5 -4.5 -50 6.0 -6.0 -50 Crosstalk (Control Input to Signal Output) 2.25 -2.25 Adjust RL at set up so that I S =0 A R L = 600Ω C L =5 0 p F fIN = 1 MHz square wave mV4.5 -4.5 140 6.0 -6.0 200 Crosstalk (Between Any Switches) 2.25 -2.25 Adjust V IN to Obtain 0 dBm at Input R L = 600Ω C L =5 0p F fIN = 1 MHz sine wave -50 dB4.5 -4.5 -50 6.0 -6.0 -50 (*): Input COMMON Terminal, and measured at SWITCH Terminal. (**): Input SWITCH Terminal, and measured at COMMON Terminal. NOTE: These characteristics are determined by design of devices. M54/M74HC4051/4052/4053

SWITCHING CHARACTERISTICS TEST CIRCUIT CROSSTALK (control to output) GND (V SS ) tPLZ,tPHZ ,tPZL,tPZH . CROSSTALK BETWEEN ANY TWO SWITCHES BANDWIDTH AND FEEDTHROUGH ATTENUATION C I–O C I/O GND (VSS) M54/M74HC4051/4052/4053

CHANNEL RESISTANCE (RON ) ICC (Opr.) SWITCHING CHARACTERISTICS TEST WAVEFORM M54/M74HC4051/4052/4053

Plastic DIP16 (0.25) MECHANICAL DATA DIM. mm inch a1 0.51 0.020 B 0.77 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 0.050 P001C M54/M74HC4051/4052/4053

Ceramic DIP16/1 MECHANICAL DATA DIM. mm inch A 20 0.787 B 7 0.276 D 3.3 0.130 E 0.38 0.015 e3 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N 10.3 0.406 P 7.8 8.05 0.307 0.317 Q 5.08 0.200 P053D M54/M74HC4051/4052/4053

SO16 (Narrow) MECHANICAL DATA DIM. mm inch A 1.75 0.068 a1 0.1 0.2 0.004 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.62 0.024 S8 ° (max.) P013H M54/M74HC4051/4052/4053

DIM. mm inch A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A M54/M74HC4051/4052/4053

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specificationsmentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronicsproducts are not authorized foruse ascritical componentsin life support devices or systems without express written approval of SGS-THOMSON Microelectonics.  1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A M54/M74HC4051/4052/4053