SL74HC244 SLS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Performance Silicon-Gate CMOS The SL74HC244 is identical in pinout to the LS/ALS244. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This octal noninverting buffer/line driver/line receiver is designed to be used with 3 -state memory address drivers, clock drivers, and other bus -oriented systems. The device has noninverting outputs and two active-low output enables.
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Operating Voltage Range: 2.0 to 6.0 V
- Low Input Current: 1.0 µA
- High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
TA = -55° to 125° C for all packages FUNCTION TABLE Inputs Outputs Enable A, Enable B A,B YA,YB L L L L H H H X Z X=don’t care Z = high impedance LOGIC DIAGRAM PIN 20=VCC PIN 10 = GND PIN ASSIGNMENT
MAXIMUM RATINGS* Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V VIN DC Input Voltage (Referenced to GND) -1.5 to VCC +1.5 V VOUT DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V IIN DC Input Current, per Pin ±20 mA IOUT DC Output Current, per Pin ±35 mA ICC DC Supply Current, VCC and GND Pins ±75 mA PD Power Dissipation in Still Air, Plastic DIP+ 750 500 mW Tstg Storage Temperature -65 to +150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) 260 °C *Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC DC Supply Voltage (Referenced to GND) 2.0 6.0 V VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND) 0 VCC V TA Operating Temperature, All Package Types -55 +125 °C tr, tf Input Rise and Fall Time (Figure 1) VCC =2.0 V VCC =4.5 V VCC =6.0 V 1000 500 400 ns This device contains protection circuitry to guard against damage due to hi gh static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high -impedance circuit. For proper operation, V IN and VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or V CC). Unused outputs must be left open.
DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND) VCC Guaranteed Limit Symbol Parameter Test Conditions V 25 °C to -55°C ≤85 ≤125 Unit VIH Minimum High-Level Input Voltage VOUT= VCC-0.1 V IOUT≤ 20 µA 2.0 4.5 6.0 1.5 3.15 4.2 1.5 3.15 4.2 1.5 3.15 4.2 V VIL Maximum Low -Level Input Voltage VOUT=0.1 V IOUT ≤ 20 µA 2.0 4.5 6.0 0.5 1.35 1.8 0.5 1.35 1.8 0.5 1.35 1.8 V VOH Minimum High-Level Output Voltage VIN=VIH IOUT ≤ 20 µA 2.0 4.5 6.0 1.9 4.4 5.9 1.9 4.4 5.9 1.9 4.4 5.9 V VIN=VIH IOUT ≤ 6.0 mA IOUT ≤ 7.8 mA 4.5 6.0 3.98 5.48 3.84 5.34 3.7 5.2 VOL Maximum Low-Level Output Voltage VIN= VIL IOUT ≤ 20 µA 2.0 4.5 6.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 V VIN= VIL IOUT ≤ 6.0 mA IOUT ≤ 7.8 mA 4.5 6.0 0.26 0.26 0.33 0.33 0.4 0.4 IIN Maximum Input Leakage Current VIN=VCC or GND 6.0 ±0.1 ±1.0 ±1.0 µA IOZ Maximum Three-State Leakage Current Output in High-Impedance State VIN= VIL or VIH VOUT=VCC or GND ICC Maximum Quiescent Supply Current (per Package) VIN=VCC or GND IOUT=0µA 6.0 4.0 40 160 µA
(1/8 of the Device)