HC153

SN54HC153 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

/C0083/C0078/C0053/C0052/C0072/C0067/C0049/C0053/C0051/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0049/C0053/C0051 /C0068/C0085/C0065/C0076 /C0052/C0262/C0076/C0073/C0078/C0069 /C0084/C0079 /C0049/C0262/C0076/C0073/C0078/C0069 /C0068/C0065/C0084/C0065 /C0083/C0069/C0076/C0069/C0067/C0084/C0079/C0082/C0083/C0047/C0077/C0085/C0076/C0084/C0073/C0080/C0076/C0069/C0088/C0069/C0082/C0083 SCLS112D − DECEMBER 1982 − REVISED OCTOBER 2003 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Wide Operating Voltage Range of 2 V to 6 V /C0068Outputs Can Drive Up To 15 LSTTL Loads /C0068Low Power Consumption, 80-µA Max ICC /C0068Typical tpd = 9 ns /C0068±6-mA Output Drive at 5 V /C0068Low Input Current of 1 µA Max /C0068Permit Multiplexing from n Lines to One Line /C0068Perform Parallel-to-Serial Conversion /C0068Strobe (Enable) Line Provided for Cascading (N Lines to n Lines) SN54HC153 ...J O R W PACKAGE SN74HC153 . . . D, N, NS, OR PW PACKAGE (TOP VIEW) SN54HC153 . . . FK PACKAGE (TOP VIEW) NC − No internal connection B 1C3 1C2 1C1 1C0 GND VCC A 2C3 2C2 2C1 2C0 321 2 0 1 9 91 01 11 21 3 A 2C3 NC 2C2 2C1 1C3 1C2 NC 1C1 1C0 B NC 2C0 V GND NC CC description/ordering information Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe (G) inputs are provided for each of the two 4-line sections.

ORDERING INFORMATION

TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP − N Tube of 25 SN74HC153N SN74HC153N Tube of 40 SN74HC153D SOIC − D Reel of 2500 SN74HC153DR HC153 −40°C to 85°C SOIC − D Reel of 250 SN74HC153DT HC153 −40°C to 85°C SOP − NS Reel of 2000 SN74HC153NSR HC153 Tube of 90 SN74HC153PW TSSOP − PW Reel of 2000 SN74HC153PWR HC153TSSOP − PW Reel of 250 SN74HC153PWT HC153 CDIP − J Tube of 25 SNJ54HC153J SNJ54HC153J −55°C to 125°C CFP − W Tube of 150 SNJ54HC153W SNJ54HC153W−55 C to 125C LCCC − FK Tube of 55 SNJ54HC153FK SNJ54HC153FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Copyright  2003, Texas Instruments Incorporated Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 /C0079/C0110 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0109/C0112/C0108/C0105/C0097/C0110/C0116 /C0116/C0111 /C0077/C0073/C0076/C0262/C0080/C0082/C0070/C0262/C0051/C0056/C0053/C0051/C0053/C0044 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115 /C0097/C0114/C0101 /C0116/C0101/C0115/C0116/C0101/C0100 /C0117/C0110/C0108/C0101/C0115/C0115 /C0111/C0116/C0104/C0101/C0114/C0119/C0105/C0115/C0101 /C0110/C0111/C0116/C0101/C0100/C0046 /C0079/C0110 /C0097/C0108/C0108 /C0111/C0116/C0104/C0101/C0114 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115/C0044 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046

/C0083/C0078/C0053/C0052/C0072/C0067/C0049/C0053/C0051/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0049/C0053/C0051 /C0068/C0085/C0065/C0076 /C0052/C0262/C0076/C0073/C0078/C0069 /C0084/C0079 /C0049/C0262/C0076/C0073/C0078/C0069 /C0068/C0065/C0084/C0065 /C0083/C0069/C0076/C0069/C0067/C0084/C0079/C0082/C0083/C0047/C0077/C0085/C0076/C0084/C0073/C0080/C0076/C0069/C0088/C0069/C0082/C0083 SCLS112D − DECEMBER 1982 − REVISED OCTOBER 2003

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

OUTPUTSELECT † DATA G OUTPUT Y B A C0 C1 C2 C3 G Y X X X X X X H L L LL XXXL L L LH XXXL H L HX LXXL L L HX HXXL H H LX XLXL L H LX XHXL H H HX XXLL L H H X X X H L H † Select inputs A and B are common to both sections.

/C0083/C0078/C0053/C0052/C0072/C0067/C0049/C0053/C0051/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0049/C0053/C0051 /C0068/C0085/C0065/C0076 /C0052/C0262/C0076/C0073/C0078/C0069 /C0084/C0079 /C0049/C0262/C0076/C0073/C0078/C0069 /C0068/C0065/C0084/C0065 /C0083/C0069/C0076/C0069/C0067/C0084/C0079/C0082/C0083/C0047/C0077/C0085/C0076/C0084/C0073/C0080/C0076/C0069/C0088/C0069/C0082/C0083 SCLS112D − DECEMBER 1982 − REVISED OCTOBER 2003 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 logic diagram (positive logic) Pin numbers shown are for the D, J, N, NS, PW, and W packages. TG TG TG TG TG TG TG TG TG TG TG TG A B 1C0 1C1 1C2 1C3 2C0 2C1 2C2 2C3

/C0083/C0078/C0053/C0052/C0072/C0067/C0049/C0053/C0051/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0049/C0053/C0051 /C0068/C0085/C0065/C0076 /C0052/C0262/C0076/C0073/C0078/C0069 /C0084/C0079 /C0049/C0262/C0076/C0073/C0078/C0069 /C0068/C0065/C0084/C0065 /C0083/C0069/C0076/C0069/C0067/C0084/C0079/C0082/C0083/C0047/C0077/C0085/C0076/C0084/C0073/C0080/C0076/C0069/C0088/C0069/C0082/C0083 SCLS112D − DECEMBER 1982 − REVISED OCTOBER 2003

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54HC153 SN74HC153 UNITMIN NOM MAX MIN NOM MAX UNIT VCC Supply voltage 2 5 6 2 5 6 V VCC = 2 V 1.5 1.5 VIH High-level input voltage VCC = 4.5 V 3.15 3.15 VVIH High-level input voltage VCC = 6 V 4.2 4.2 V VCC = 2 V 0.5 0.5 VIL Low-level input voltage VCC = 4.5 V 1.35 1.35 VVIL Low-level input voltage VCC = 6 V 1.8 1.8 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 2 V 1000 1000 ∆t/∆v Input transition rise/fall time VCC = 4.5 V 500 500 ns∆t/∆v Input transition rise/fall time VCC = 6 V 400 400 ns TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

/C0083/C0078/C0053/C0052/C0072/C0067/C0049/C0053/C0051/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0049/C0053/C0051 /C0068/C0085/C0065/C0076 /C0052/C0262/C0076/C0073/C0078/C0069 /C0084/C0079 /C0049/C0262/C0076/C0073/C0078/C0069 /C0068/C0065/C0084/C0065 /C0083/C0069/C0076/C0069/C0067/C0084/C0079/C0082/C0083/C0047/C0077/C0085/C0076/C0084/C0073/C0080/C0076/C0069/C0088/C0069/C0082/C0083 SCLS112D − DECEMBER 1982 − REVISED OCTOBER 2003 5POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C SN54HC153 SN74HC153 UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX MIN MAX UNIT 2 V 1.9 1.998 1.9 1.9 VOH VI = VIH or VIL IOH = −20 µA 6 V 5.9 5.999 5.9 5.9 VVOH VI = VIH or VIL V 2 V 0.002 0.1 0.1 0.1 VOL VI = VIH or VIL IOL = 20 µA 6 V 0.001 0.1 0.1 0.1 VVOL VI = VIH or VIL V II VI = VCC or 0 6 V ±0.1 ±100 ±1000 ±1000 nA ICC VI = VCC or 0, IO = 0 6 V 8 160 80 µA C i 2 V to 6 V 3 10 10 10 pF switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM TO VCC TA = 25°C SN54HC153 SN74HC153 UNITPARAMETER FROM (INPUT) TO (OUTPUT) VCC MIN TYP MAX MIN MAX MIN MAX UNIT

2 V 90 150 225 190

A or B Y 4.5 V 21 30 45 38A or B Y

6 V 17 26 38 32

2 V 73 126 189 158

(Any C) Y 4.5 V 17 28 42 35 nstpd (Any C) Y

6 V 14 23 35 29

2 V 38 95 150 125

G Y 4.5 V 11 19 28 24G Y

6 V 9 16 24 20

2 V 20 60 90 75

tt Y 4.5 V 8 12 18 15 nstt Y

6 V 6 10 15 13

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

2 V 105 235 355 295

6 V 21 41 60 51

2 V 93 220 335 274

6 V 19 38 57 48

2 V 60 185 280 230

6 V 14 32 48 40

2 V 45 210 315 265

6 V 13 36 53 45

NOTES: A. C L includes probe and test-fixture capacitance. characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 5962-8409301VEA ACTIVE CDIP J 16 1 TBD Call TI Call TI 5962-8409301VFA ACTIVE CFP W 16 1 TBD Call TI Call TI 84093012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type 8409301EA ACTIVE CDIP J 16 1 TBD A42 SNPB N / A for Pkg Type 8409301FA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type SN54HC153J ACTIVE CDIP J 16 1 TBD A42 SNPB N / A for Pkg Type SN74HC153D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DT ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153DTE4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HC153NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HC153NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PWLE OBSOLETE TSSOP PW 16 TBD Call TI Call TI SN74HC153PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PWT ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC153PWTE4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54HC153FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type SNJ54HC153J ACTIVE CDIP J 16 1 TBD A42 SNPB N / A for Pkg Type SNJ54HC153W ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 1

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 2

MLCC006B – OCTOBER 1996 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 4040140/D 10/96

28 TERMINAL SHOWN

B 0.358 (9,09) MAX (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) ANO. OF MINMAX 0.358 0.660 0.761 0.458 0.342 (8,69) MIN (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32)(18,78) 0.020 (0,51) TERMINALS 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 121314151618 17 432 0.020 (0,51) 0.010 (0,25) 12826 27 B SQ A SQ 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a metal lid. D. The terminals are gold plated. E. Falls within JEDEC MS-004

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PINS SHOWN

0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated