HC138

6N135 QT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

FEATURES

• High speed-1 MBit/s  Superior CMR-10 kV/µs  Dual-Channel HCPL-2530/HCPL-2531  Double working voltage-480V RMS  CTR guaranteed 0-70°C  U.L. recognized (File # E90700) HIGH SPEED TRANSISTOR OPTOCOUPLERS

DESCRIPTION

The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation permitting a 480 V working voltage compared to industry standard 0f 220 V.

APPLICATIONS

 Line receivers  Pulse transformer replacement  Output interface to CMOS-LSTTL-TTL  Wide bandwidth analog coupling Parameter Symbol Value Units Storage Temperature T STG -55 to +125 °C Operating Temperature T OPR -55 to +100 °C Lead Solder Temperature T SOL 260 for 10 sec °C EMITTER DC/Average Forward Input Current Each Channel (Note 1) I F (avg) 25 mA Peak Forward Input Current (50% duty cycle, 1 ms P.W.) IF (pk) 50 mAEach Channel (Note 2) Peak Transient Input Current - (!"1 µsP.W., 300 pps) IF (trans) 1.0 AEach Channel Reverse Input Voltage Each Channel V R 5V Input Power Dissipation (6N135/6N136 and HCPL-2503/4502) PD 100 mW(HCPL-2530/2531 ) Each Channel (Note 3) 45 DETECTOR Average Output Current Each Channel I O (avg) 8 mA Peak Output Current Each Channel I O (pk) 16 mA Emitter-Base Reverse Voltage (6N135, 6N136 and HCPL-2503 only) V EBR 5V Supply Voltage V CC -0.5 to 30 V Output Voltage V O -0.5 to 20 V Base Current (6N135, 6N136 and HCPL-2503 only) I B 5m A Output power (6N135, 6N136, HCPL-2503, HCPL-4502) (Note 4) PD 100 mW dissipation (HCPL-2530, HCPL-2531) Each Channel 35 mW ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) 4 5 VF1 VCC V01 V02 GND VF2 HCPL-2530/HCPL-2531 4 5 VF VCC VB VO GNDN/C N/C 6N135, 6N136, HCPL-2503, HCPL-4502 Pin 7 is not connected in Part Number HCPL-4502 SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502 200004A

ELECTRICAL CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specified) 200004A Parameter Test Conditions Symbol Device Min Typ Max Unit EMITTER (IF = 16 mA, TA =25°C) VF 1.45 1.7 VInput Forward Voltage (I F = 16 mA) 1.8 Input Reverse Breakdown Voltage (I R = 10 µA) B VR 5.0 V Temperature coefficient of forward voltage (IF = 16 mA) (#VF/#TA) -1.6 mV/ °C DETECTOR (IF = 0 mA, VO = VCC = 5.5 V) All 0.001 0.5 (TA =25°C) Logic high output current I OH 6N135 µA(IF = 0 mA, VO = VCC = 15 V) 6N136 0.005 1(TA =25°C) HCPL-4502 HCPL-2503 (IF = 0 mA, VO = VCC = 15 V) All 50 6N135 (IF = 16 mA, VO = Open) 6N136 120 200 Logic low supply current (VCC = 15 V) ICCL HCPL-4502 µAHCPL-2503 (IF1 = IF2 = 16 mA, VO = Open) HCPL-2530 200 400(VCC = 15 V) HCPL-2531 6N135 (IF = 0 mA, VO = Open, VCC = 15 V) 6N136 1(TA =25°C) HCPL-4502 HCPL-2503 ICCH 6N135 Logic high supply current (I F = 0 mA, VO = Open) 6N136 µA (VCC = 15 V) HCPL-4502 HCPL-2503 (IF = 0 mA, VO = Open) HCPL-2530 0.02 4(VCC = 15 V) HCPL-2531 INDIVIDUAL COMPONENT CHARACTERISTICS HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502 All typicals at TA = 25°C

Parameter Test Conditions Symbol Device Min Typ Max Unit COUPLED 6N135 71 85 0% (IF = 16 mA, VO = 0.4 V) HCPL-2530 (VCC = 4.5 V, TA =25°C) 6N136 HCPL-4502 19 27 50 % HCPL-2531 Current transfer ratio CTR HCPL-2503 12 27 % (Note 5) 6N135 52 1 %HCPL-2530 (IF = 16 mA, VO = 0.5 V) 6N136 (VCC = 4.5 V) HCPL-4502 15 30 % HCPL-2531 HCPL-2503 9 30 % (IF = 16 mA, IO = 1.1 mA) 6N135 0.18 0.4 (VCC = 4.5 V, TA =25°C) HCPL-2530 0.18 0.5 6N136 (IF = 16 mA, IO = 3 mA) HCPL-4502 0.25 0.4 (VCC = 4.5 V, TA =25°C) HCPL-2503 Logic low output voltage V OL HCPL-2531 0.25 0.5 Voutput voltage (I F = 16 mA, IO = 0.8 mA) 6N135 0.5(VCC = 4.5 V) HCPL-2530 6N136 (IF = 16 mA, IO = 2.4 mA) HCPL-4502 0.5(VCC = 4.5 V) HCPL-2503 HCPL-2531 200004A TRANSFER CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specified) HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502 All typicals at TA = 25°C

Parameter Test Conditions Symbol Device Min Typ Max Unit TA = 25°C, (RL = 4.1 k$, IF = 16 mA) (Note 6) (Fig. 7) 6N135 0.45 1.5 µsHCPL-2530 6N136 (RL = 1.9 k$, IF = 16 mA) (Note 7) (Fig. 7) HCPL-4502 0.45 0.8 µsPropagation delay T A = 25°C HCPL-2503 time to logic low TPHL HCPL-2531 (RL = 4.1 k$, IF = 16 mA) (Note 6) (Fig. 7) 6N135 2.0 µsHCPL-2530 6N136 (RL = 1.9 k$, IF = 16 mA) (Note 7) (Fig. 7) HCPL-4502 1.0 µsHCPL-2503 HCPL-2531 TA = 25°C, (RL = 4.1 k$, IF = 16 mA) (Note 6) (Fig. 7) 6N135 0.5 1.5 µsHCPL-2530 6N136 (RL = 1.9 k$, IF = 16 mA) (Note 7) (Fig. 7) HCPL-4502 0.3 0.8 µsTA = 25°C HCPL-2503 Propagation delay TPLH HCPL-2531 time to logic high (RL = 4.1 k$, IF = 16 mA) (Note 6) (Fig. 7) 6N135 2.0 µsHCPL-2530 6N136 (RL = 1.9 k$, IF = 16 mA) (Note 7) (Fig. 7) HCPL-4502 1.0 µsHCPL-2503 HCPL-2531 (IF = 0 mA, VCM = 10 VP-P,RL = 4.1 k$) 6N135 10,000 V/µsCommon mode (Note 8) (Fig. 8) T A = 25°C HCPL-2530 transient (I F = 0 mA, VCM = 10 VP-P) |CM H | 6N136 immunity at T A = 25°C, (RL = 1.9 k$) HCPL-4502 10,000 V/µslogic high (Note 8) (Fig. 8) HCPL-2503 HCPL-2531 (IF = 16 mA, VCM = 10 VP-P,RL = 4.1 k$) 6N135 10,000 V/µsCommon mode (Note 8) (Fig. 8) T A = 25°C HCPL-2530 transient (I F = 16 mA, VCM = 10 VP-P) |CM L| 6N136 immunity at (R L = 1.9 k$) HCPL-4502 10,000 V/µslogic low (Note 8) (Fig. 8) HCPL-2503 HCPL-2531 SWITCHING CHARACTERISTICS (TA = 0 to 70°C unless otherwise specified., VCC = 5 V) HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502 All typicals at TA = 25°C

SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502 1. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C. 2. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C. 3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C. 4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C. 5. Current Transfer Ratio is defined as a ratio of output collector current, IO , to the forward LED input current, IF, times 100%. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm /dt on the leading edge of the common mode pulse signal VCM , to assure that the output will remain in a logic high state (i.e., VO %2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm /dt on the trailing edge of the common mode pulse signal, VCM , to assure that the output will remain in a logic low state (i.e., VO &0.8 V). 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. NOTES Characteristics Test Conditions Symbol Min Typ Max Unit (Relative humidity = 45%) Input-output (T A = 25°C, t = 5 s) II-O 1.0 µAinsulation leakage current (V I-O = 3000 VDC) (Note 9) Withstand insulation test voltage VISO 2500 V RMS(Note 9) ( t = 1 min.) Resistance (input to output) (Note 9) (VI-O = 500 VDC) R I-O 1012 $ Capacitance (input to output) (Note 9) (f = 1 MHz) C I-O 0.6 pF DC Current gain (I O = 3 mA, VO = 5 V) HFE 150 Input-Input (RH ! 45%, VI-I = 500 VDC) (Note 10) II-I 0.005 µAInsulation leakage current t = 5 s, (HCPL-2530/2531 only) Input-Input Resistance (VI-I = 500 VDC) (Note 10) R I-I 1011 $(HCPL-2530/2531 only) Input-Input Capacitance (f = 1 MHz) (Note 10) C I-I 0.03 pF(HCPL-2530/2531 only) ISOLATION CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specified) All typicals at TA = 25°C

Fig. 1 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 0.1 1 10 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 2 Normalized CTR vs. Temperature TA - TEMPERATURE (˚C) -60 -40 -20 0 20 40 60 80 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 3 Output Current vs. Output Voltage VO - OUTPUT VOLTAGE (V) 02468 1 0 1 2 1 4 1 6 1 8 2 0 IO - OUTPUT CURRENT (mA) IF = 5 mA IF = 10 mA IF = 15 mA IF = 20 mA IF = 25 mA IF = 30 mA IF = 35 mA IF = 40 mA Normalized to: IF = 16 mA VO = 0.4 V VCC = 5 V TA = 25˚C Normalized to: T A = 25˚C IF = 16mA VCC = 5 V VO = 0.4 V Fig. 4 Logic High Output Current vs. Temperature TA - TEMPERATURE (˚C) -60 -40 -20 0 20 40 60 80 100 IOH - LOGIC HIGH OUTPUT CURRENT (nA) 0.1 100 1000 Fig. 5 Propagation Delay vs. Temperature TA - TEMPERATURE (˚C) -60 -40 -20 0 20 40 60 80 100 Tp - PROPAGATION DELAY (ns) 100 200 300 400 500 600 700 800 R L = 1.9 K (TPHL) R = 4.1 K (TPLH)L R L = 1.9 K (TPLH) R L = 4.1 K (TPLH) Fig. 6 Propagation Delay vs. Load Resistance RL = LOAD RESISTANCE (k$) 1 10 TP - PROPAGATION DELAY (ns) 100 1000 10000 IF - 16 mA (TPHL) IF - 10 mA (TPHL) IF - 10 mA (TPLH) IF - 16 mA (TPLH) TA = 25˚C VCC = 5 V IF = 0 mA VCC = 5 V VO = 5 V IF = 16 mA VCC = 5 V VCC = 5 V TA = 25˚C HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502

B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at A : I = 16 mAF tr VO OV OLV 5 V

0 V 10% 10%

90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + 10% DUTY CYCLE I/f < 100 µS FI MONITOR LR C = 1.5 µFL Pulse Generator tr = 5ns Z = 50O $ GND+ 4 5 F2V VF1 Shield Noise +5 V CC V L V V R VO VCM A B Pulse Gen FI I MonitorF I/ < 100 s 10% D.C. tr = 5ns Generator Pulse Z = 50 f O VF I F Shield Noise VO O

5 GND

V BV LR CCV +5 V 0.1 µF LC = 1.5 µF Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502 0.1 µF Test Circuit for HCPL-2530 and HCPL-2531 Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531 ft 0.1 µF 0.1 µF FFV mR mR 90% Fig. 8 Common Mode Immunity Test Circuit Fig. 7 Switching Time Test Circuit 200004A HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502

All dimensions are in inches (millimeters) Call QT Optoelectronics for more information or the phone number of your nearest distributor. www.qtopto.com 200004A Package Dimensions (Surface Mount) Lead Coplanarity : 0.004 (0.10) MAX 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.020 (0.51) MIN 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) TYP 0.405 (10.30) MIN 0.315 (8.00) MIN 0.045 [1.14] 32 14 56 78 PIN 1 ID. 0.016 (0.41) 0.008 (0.20) Package Dimensions (Through Hole) 0.200 (5.08) 0.115 (2.92) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) PIN 1 ID. 0.070 (1.78) 0.045 (1.14) 241 56 78 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15° MAX SEATING PLANE Package Dimensions (0.4”Lead Spacing) 0.200 (5.08) 0.115 (2.92) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 78 0.400 (10.16) TYP 0.154 (3.90) 0.008 (0.20) 0° to15° PIN 1 ID. SEATING PLANE HIGH SPEED TRANSISTOR OPTOCOUPLERS SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502

Corporate Headquarters North American Sales European Sales QT Optoelectronics QT Optoelectronics Quality Technologies Deutschland GmbH 610 North Mary Avenue 16775 Addison Rd.,Suite 200 Max-Huber-Strasse 8 Sunnyvale, CA 94086 Addison, TX 75001 D-85737 Ismaning, Germany (408) 720-1440 Phone (972) 447-1300 Phone 49 [0] 89/96.30.51 Phone (408) 720-0848 Fax (972) 447-0784 Fax 49 [0] 89/96.54.74 Fax European Sales Asia/Pacific Sales European Sales QT Optoelectronics QT Optoelectronics Quality Technologies (U.K) Ltd. “Le Levant” B613, 6th Floor 10, Prebendal Court, Oxford Road 2, rue du Nouveau Bercy East Wing, Wisma Tractors Aylesbury, Buckinghamshire F-94277-CHARENTON-LE PONT Cedex Jalan SS16/1, Subang Jaya HP19-3EY United Kingdom FRANCE 47500 Petaling Jaya 44 [0] 1296/30.44.99 Phone 33 [0] 1.43.75.77.57 Fax 603/735-2417 Phone 603/736-3382 Fax Call QT Optoelectronics for more information or the phone number of your nearest distributor. www.qtopto.com R2 .R2 Opto Plus Reliability Conditioning S .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel SDL .SDL Surface Mount; Tape and reel W .W 0.4” Lead Spacing Order Entry Option Identifier Description 4.0 ± 0.1 Ø1.55 ± 0.05 User Direction of Feed 4.0 ± 0.1 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 13.2 ± 0.2 4.90 ± 0.20 0.1 MAX 10.30 ± 0.20 10.30 ± 0.20 Ø1.6 ± 0.1 QT Carrier Tape Specifications (“D” Taping Orientation)

ORDERING INFORMATION

SINGLE-CHANNEL DUAL-CHANNEL 6N135, 6N136 HCPL-2530 HCPL-2503 HCPL-2531 HCPL-4502