HBXX-3319DS-VTM COMMSCOPE | Alldatasheet
Document overview
- Manufacturer or author: CommScope
- PDF pages: 3
Technical content
HBXX-3319DS-VTM | HBXX-3319DS-A2M ©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 28, 2022 Page of 1 3 4-port sector antenna, 4x 1710–2180 MHz, 33° HPBW, RET compatible General Specifications Antenna Type Sector Band Single band Color Light gray Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Performance Note Outdoor usage Radome Material Fiberglass, UV resistant Radiator Material Low loss circuit board RF Connector Interface 7-16 DIN Female RF Connector Location Bottom RF Connector Quantity, high band 4 RF Connector Quantity, total 4 Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 2.0 Actuator HBXX-3319DS-A2M Dimensions Width 564 mm | 22.205 in Depth 125 mm | 4.921 in Length 1448 mm | 57.008 in Net Weight, without mounting kit 17.3 kg | 38.14 lb Port Configuration
HBXX-3319DS-VTM | HBXX-3319DS-A2M ©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 28, 2022 Page of 2 3 Electrical Specifications Impedance 50 ohm Operating Frequency Band 1710 – 2180 MHz Polarization ±45° Electrical Specifications Frequency Band, MHz 1710–1880 1850–1990 1920–2180 Gain, dBi 20.3 20.3 20.7 Beamwidth, Horizontal, degrees 36 35.1 34 Beamwidth, Vertical, degrees 6.5 6.2 5.9 Beam Tilt, degrees 0–10 0–10 0–10 USLS (First Lobe), dB 15 16 16 Front-to-Back Ratio at 180°, dB 41 42 42 Isolation, Cross Polarization, dB 30 30 30 Isolation, Inter-band, dB 28 30 30 PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 Input Power per Port at 50°C, maximum, watts 250 250 250 Electrical Specifications, BASTA Frequency Band, MHz 1710–1880 1850–1990 1920–2180 Gain by all Beam Tilts, average, dBi 20 20 20.3 Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.8 Gain by Beam Tilt, average, dBi 0 ° | 20.1 5 ° | 20.1 10 ° | 19.7 0 ° | 20.0 5 ° | 20.1 10 ° | 19.7 0 ° | 20.4 5 ° | 20.5 10 ° | 19.9 Beamwidth, Horizontal Tolerance, degrees ±2.8 ±1.6 ±2.4 Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3 ±0.4 USLS, beampeak to 20° above beampeak, dB 14 15 15 Front-to-Back Total Power at 180° ± 30°, dB 36 38 37 CPR at Boresight, dB 25 24 24 Mechanical Specifications Wind Loading @ Velocity, frontal 1,019.0 N @ 150 km/h (229.1 lbf @ 150 km/h) Wind Loading @ Velocity, lateral 176.0 N @ 150 km/h (39.6 lbf @ 150 km/h) Wind Loading @ Velocity, rear 1,089.0 N @ 150 km/h (244.8 lbf @ 150 km/h) 201 km/h | 124.896 mph
HBXX-3319DS-VTM | HBXX-3319DS-A2M ©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 28, 2022 Page of 3 3 Wind Speed, maximum 201 km/h | 124.896 mph Packaging and Weights Width, packed 758 mm | 29.843 in Depth, packed 281 mm | 11.063 in Length, packed 1934 mm | 76.142 in Weight, gross 30.8 kg | 67.902 lb Regulatory Compliance/Certifications Agency Classification CE Compliant with the relevant CE product directives CHINA-ROHS Below maximum concentration value ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance ROHS Compliant Included Products BSAMNT-3 – Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. * Footnotes Performance Note Severe environmental conditions may degrade optimum performance