HBS2B4KGSP011C

HBS2KGB4SP011C CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

J–49 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com HB Series Single Pole Standard Precision Snap-acting Switches Models Available Features/Benefits

• Low differential travel, high repeatability
• Long life—150,000 cycles typical
• Single and double pole circuitry
• Sealed actuator and case Typical Applications
• Thermostats
• Motors
• Industrial controls Specifications CONTACT RATING: From low level* to 20 AMPS @ 480 V AC; see ELECTRICAL RATING option section for complete listings. ELECTRICAL LIFE: 150,000 cycles at 20 AMPS @ 250 V AC. consult Customer Service Center for typical life at other ratings. INSULATION RESISTANCE: 1,000 M ohm min. DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level. OPERATING TEMPERATURE: –67ºF to 302ºF (–55ºC to 150ºC). OPERATING FORCE: From 4 oz. to 26 oz. max. at actuator button available. MOUNTING SCREWS: Torque 3 in/lbs max. (Note: Exceeding 3 in/lbs torque may change operating characteristics and increase the possibility of cracking switch case). TERMINAL SCREWS: Torque 4 in/lbs max. PANEL MOUNTING BUSHING: Torque 4-6 in/lbs max. DEGREE OF PROTECTION: IP65; Dust-proof, water splash and dew condensation. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Materials SWITCH HOUSING: Heat resistant/electrical grade phenolic. INSERTS: Brass alloy. ACTUATOR BUTTON: Moisture resistant phenolic. SPRING: Copper alloy. PIVOT: Brass alloy. MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP and motor load ratings less than 1/2 HP @ 125 V AC. Silver alloy for motor load ratings 1/2 HP @ 125 V AC or gr eater. STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver welded to copper base for ratings greater than 1 AMP and motor load ratings less than 1/2 HP @ 125 V AC. Silver alloy on copper base for motor load ratings 1/2 HP @ 125 V AC or greater. TERMINALS: Brass alloy, bright tin plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-50 thru J-54. For additional options not shown in catalog, consult Customer Service Center. H B Series HB Precision Snap-acting Switches Operating Force KG 18 oz./510 grams GF 4 oz./113 grams KA 9 oz./255 grams KC 13 oz./368 grams KH 20 oz./567 grams PB 26 oz./737 grams Contact Separation 2 .020" 1 .010" 4 .040" 7 .070" Electrical Rating B4 20 A, 125, 250, 480 V AC; 0.25 A, 250 V DC; 0.5 A, 125 V DC A2 5 A, 125, 250 V AC B6 20 A, 125, 250, 480 V AC; 0.25 A, 250 V DC; 0.5 A, 125 V DC; 3/4 HP ,

125 V AC; 1 1/2 HP, 25O V AC

F5 1 A,125 V AC; 1 A, 3O V DC F9 22 A, 125, 277 V AC; 15 A, 480 V AC; 1/4 HP, 125 V AC; 1/2 HP , 250 V AC X3 20 A, 125, 250, 480 V AC; 0.25 A, 250 V DC; 0.5 A, 125 V DC; 15(10) A, Actuator P0 Pin plunger A0 Lever roller D0 Stub plunger F0 Reverse acting lever roller J0 High overtravel plunger R5 Perpendicular roller plunger T0 Lever TS Sealed Lever Y0 Reverse acting lever Terminations

11 Flat base, solder, 4-40 screws

41 Flat base, .250" quick connect

55 Step base, cup washers, 6-32 screws

S Function S SP S C

J Snap-acting J–50 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com HB Series Single Pole Standard Precision Snap-acting Switches SERIES FUNCTION CONTACT SEPARATION CONTACT .0015 .0002 .0004 DIFFERENTIAL TRAVEL SPECIFICATION LIMITS FOR VARIOUS CONTACT SEPARATIONS INCH Single Pole OPER. POS. .625 ± .01 5 (15,88 ± 0,38) S SINGLE POLE SWITCH HB PRECISION SNAP-ACTING SWITCHES NOTE: To select switching function, see CIRCUITRY section, page J-52. Sealed Actuator and Case To provide reliable service under environmental conditions that might damage standard precision switches, various HB Series switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive. These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional information on sealed switches, consult our Customer Service Center. .070 (1,78)7 .040 (1,02)4 .010 (0,25)1 .020 (0,51)2 NOMINAL CONTACT SEPARATION (in./mm) OPTION CODE Switches with 1 AMP rating (option code ‘F5’) are available only with .020 contact separation (option ‘2’). Switches with 1/2 HP , 125 V AC rating or greater (option codes ‘B5 and B6’) are not available with .010 contact separation (option code ‘1’).

J–51 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com HB Series Single Pole Standard Precision Snap-acting Switches OPERATING FORCE ELECTRICAL RATING .07026 740PB .04020 570KH .02013 370KC .0109 255KA .0104 115GF .02018 510KG STANDARD CONTACT SEPARATION (inch) MAXIMUM OPERATING FORCE (OZ./GRAMS) OPTION CODE 7 9 13 14 20 26 30 .010 .020 .040 .070 OUNCES OPERATING FORCE SPECIFICATION LIMITS FOR VARIOUS CONTACT SEPARATIONS CONTACT SEPARATION 4 18 STANDARD RANGE MAXIMUM LIMITS AVAILABLE NOTE: All listed differential travel characteristics are based on standard operating force andcontact separation. For any other force or contact separation, consult Customer Service Center. Operating force varies with actuator option, see ACTUATOR option section. First number represents resistive rating; second number represents inductive (motor) rating. 10(3) Cycles over 50,000 at rated current.50E3 Maximum rated use temperature.T__ Alternating current.~ Microgap construction (less than 4 mm).µ EUROPEAN SYMBOLS All models with all options, also available. Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, 20 AMPS @ 125, 250, 480 V AC; 0.25 AMP @ 250 V DC, 0.5 AMP @ 125 V DC (UL/CSA); 15 (10) AMPS @ 380 V~ T85 50E3 µ (VDE). Fine silver welded to copper base.Fine silver.V3

22 AMPS @ 125 & 277 V AC; 15 AMPS @ 480 V AC; 1/4 HP @ 125 V AC;

1/2 HP @ 250 V AC; 277 V AC (UL/CSA). Fine silver welded to copper base.Fine silver.F9 Low level* to 1 AMP @ 125 V AC; 1 AMP @ 30 V DC (UL/CSA).Gold alloy.Gold alloy.F5 20 AMPS @ 125, 250 & 480 V AC; 0.25 AMPS @ 250 V DC; 0.5 AMPS @ 125 V DC (UL/CSA). 5 AMPS @ 125 & 250 V AC (UL/CSA). 20 AMPS @ 125, 250 & 480 V AC; 0.25 AMP @ 250 V DC; 0.5 AMP @ 125 V DC; 3/4 HP @ 125 V AC; 1 1/2 HP @ 250 V AC (UL/CSA). Fine silver welded to copper base. Precious metal alloy. Fine silver. Precious metal alloy. ELECTRICALR ATINGMOVABLE CONTACT STATIONARY CONTACTOPTION CODE OPERATING FORCE (oz.) ELECTRICAL RATING

• A VAILABLE x NOT AVAILABLE AVAILABLE COMBINATIONS 4 9 1 3 1 8 2 0 2 6 GF K A K C K G K H P B x x x • • • x x x • • • x x • • • • * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.

J Snap-acting J–52 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com FIG. 6 B C D A Perpendicular Roller Plunger FIG. 8 A B CD Reverse Acting Lever FIG. 7 A B C Lever * Actuators sealed against the entrance of airborne contaminants and/or splashing liquids. HB Series Single Pole Standard Precision Snap-acting Switches MOUNTING STYLE ACTUATOR FIG. 1 A B CD Lever Roller FIG. 2 A B CD Lever Roller FIG. 3 A B Stub Plunger FIG. 4 A C D B? .040 Plunger PANEL MOUNTING .50 DIA. (12,70?) FIG. 5 A B Pin Plunger S Standard NOTE: Mounting holes will accept pins or scr ews of .139 dia. (3,53) max. on 1.000 ± .002 (25,4 ± 0,05) centers. NOTE: Torque mounting screws 3 inlbs max. NO. POLESOPTION CODE 1.03 (26,2) .38 dia. (9,7Ø) 1.120 ± .060 (28,45 ± 1,52) .86 (21,8)1SPA0 ——.844 ± .020 (21,44 ± 0,51) .92 (23,4)3SPD0 .74 (18,8) .38 dia. (9,7Ø) 1.120 ± .050 (28,45 ± 1,27) .09 (2,3)2SPF0 0.33 (8,40) .64 dia. (16,3Ø) .860±.030 (21,84±0,76) .86 (21,8)4SPJ0 ——.625 ± .010 (15,88 ± 0,25) .92 (23,4)5SPP0 0.61 (15,5) .50 dia. (12,7Ø) .62 (15,7) .92 (23,4)6SPR5 —1.03 dia. (26,2Ø)) .720 ± .060 (18,28 ± 1,52) 1.310 (33,27)7SPT0 —1.03 dia. (26,2Ø) .720 ± .060 (18,28 ± 1,52) 1.47 (37,3)7SPTS* 2.65 (6,73) .74 dia. (18,8Ø) .720 ± .030 (18,29 ± 0,76) .05 (1,3)8SPY0

J–53 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com .19 (4,8) 0.9 (2,3) .19 (4,8) .141 (3,58) .005 (0,13) .22 (5,6) 0.9 (2,3) .055 (1,40) .156 (3,96)PB .19 (4,8) 0.9 (2,3) .19 (4,8) .141 (3,58) .005 (0,13) .22 (5,6) 0.9 (2,3) .055 (1,40) .156 (3,96)KH .19 (4,8)—.19 (4,8)—.005 (0,13)———.156 (3,96)KG —0.9 (2,3)—.141 (3,58) .005 (0,13) .22 (5,6) 0.9 (2,3) .055 (1,40)—KC .19 (4,8) .06 (1,5) .19 (4,8) .141 (3,58) .005 (0,13) .22 (5,6) .06 (1,5) .055 (1,40) .156 (3,96)KA ————.005 (0,13)————GF MINIMUM OVERTRAVEL (IN/MM) .38 (9,7) 0.9 (2,3) .38 (9,7) .030 (0,76) .030 (0,76) .030 (0,76) 0.9 (2,3) .030 (0,76) .38 (9,7)PB .38 (9,7) 0.9 (2,3) .38 (9,7) .025 (0,64) .025 (0,64) .025 (0,64) 0.9 (2,3) .025 (0,64) .38 (9,7)KH .38 (9,7)—.38 (9,7)—.025 (0,64)———.312 (7,92)KG —.09 (2,3)—.020 (0,51) .020 (0,51) .020 (0,51) 0.8 (2,0) .020 (0,51)—KC .38 (9,7) .09 (2,3) .38 (9,7) .015 (0,38) .015 (0,38) .015 (0,38) 0.8 (2,0) .020 (0,51) .312 (7,92)KA ————.020 (0,51)————GF MAXIMUM PRETRAVEL (IN/MM) .156 (3,96) .031 (0,79) .156 (3,96)—.005 (0,13)—.030 (0,76) .007 (0,18) .125 (3,18)PB .093 (2,36) .020 (0,51) .093 (2,36)—.003 (0,08)—.020 (0,51) .003 (0,76) .080 (2,03)KH .078 (1,98)—.078 (1,98)—.003 (0,08)———.062 (1,57)KG —.009 (0,23)——.002 (0,05)—.008 (0,20) .002 (0,05)—KC .047 (1,19) .005 (0,13) .047 (1,19)—.0005 (0,013)—.005 (0,13) .0005 (0,013) .020 (0,51)KA ————.0005 (0,013)————GF MAXIMUM DIFFERENTIAL TRAVEL (IN/MM) * SEALED ACTUATOR TS ACTUATOR A0 D0 F0 J0 P0 R5 T0 Y0 OPTION CODE HB Series Single Pole Standard Precision Snap-acting Switches ACTUATOR 110 110 110 110 .75 21PB 110 110 110 110 .75 21KH 14—.5 14—4 110———.75 21KG 85—4 110 110 110 110—KC 110 110 110 110 .75 21KA ————1 28————GF MAXIMUM RELEASE FORCE (OZ./GRAMS) 3.5 100 570 3.5 100 740 740 740 570 740 4.5 130PB 570 570 570 570 570 570 115KH 2.5 71—2.5 71—18 510———3.5 100KG —10 284—13 370 370 370 284 370—KC 284 284 255 284 284 9.5 269 85KA ————4 115————GF MAXIMUM OPERATING FORCE (OZ./GRAMS) * SEALED ACTUATOR TS ACTUATOR A0 D0 F0 J0 P0 R5 T0 Y0 OPTION CODE NOTE: For basic switch operating forces, see page J-51. * Actuators sealed against the entrance of airbornecontaminants and/or splashing liquids.

J Snap-acting J–54 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com HB Series Single Pole Standard Precision Snap-acting Switches 11 FLAT BASE, SOLDER TERMINALS AND 4-40 SCREWS 41 FLAT BASE, .250" QUICK CONNECT TERMINALS NOTE: Switches with flat base option have molded ribs that pr ovide increased creep distance. TERMINATIONS

55 STEP BASE, 6-32 SCREWS AND CUP WASHERS

NOTE: Switches with step base option provide wide electrical clearance for screw terminal options. CIRCUITRY C DT (Double Throw, Normally Closed & Normally Open)