HBL2020 - 1-Channel ESD Protector
Document overview
- Manufacturer or author: s2190c
- PDF pages: 3
Technical content
Features
- Compact Die Protects from ESD Discharges
- Almost No Conduction at Signal Amplitudes Less Than ±4 V
- ESD Protection Over ±8 kV Contact Discharge per MIL_STD_883 International ESD Standard
Applications
- LED Lighting
- Modules
- Interface Circuits
Figure 1. Electrical Schematic dimensions section on page 2 of this data sheet.
ORDERING INFORMATION
www.onsemi.com CURRENT/VOLTAGE GRAPH Symbol Description ICL+ Positive Clamping Current VCL+ Positive Clamping Voltage IL2+ Leakage Current at VL2+ VL2+ Voltage Condition: +14V IL1+ Leakage Current at VL1+ VL1+ Voltage Condition: +4V ICL− Negative Clamping Current VCL− Negative Clamping Voltage IL1− Leakage Current at VL1− VL1− Voltage Condition: −4V NOTE: The polarity in the above graph corresponds to the polarity convention shown in the application diagram. Figure 2. Ordering Part Number Topside Metal Backside Metal Thickness Shipping Method HBL2020RP Al LCBM 4 mils Metal Frame ABSOLUTE MAXIMUM RATINGS Parameter Rating Unit Operating Temperature Range −40 to +150 °C Storage Temperature Range −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. STANDARD OPERATING CONDITIONS Parameter Rating Unit Operating Temperature Range −40 to +150 °C
- Operating characteristics are over standard operating conditions unless otherwise specified.
- This parameter is guaranteed by design and/or characterization.
Figure 3. Die Dimensions of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.