HBD POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
(888) IPD-CONV erters G (888) 473-2668 G www .ipdconverters.com HBD060YGE-A 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % EFF. (18V) EFF. (24V) EFF. (36V) 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % HBD060ZGE-A HBD040ZGE-A HBD040ZED-A HBD SERIES - DUAL OUTPUT, 60 WATT Independent T rim For Each Output 1500V Isolation 100°C Baseplate Operation TECHNICAL SPECIFICATIONS Voltage Range 24 VDC Nominal 18.00 - 36.00 VDC 48 VDC Nominal 34.00 - 75.00 VDC Reflected Ripple 80 mA Input Reverse Voltage Protection Shunt Diode HBD dual output, DC/DC converters feature high efficiency, 1500 VDC isolation, and open-frame packaging. The HBD family allows board designers to deliver any combination of power from either output, up to each model’s maximum rating. The HBD is available in 5V/3.3V or 3.3V/2.5V combinations in either a 24V or 48V input version. The HBD uses planar magnetics and has an MTBF of over a million hours. Independent Dual Outputs Flexible Load Sharing High Efficiency T opology Open-Frame Design Planar Magnetics DESCRIPTION FEATURES Input Efficiency vs. Load (24V Input) Efficiency vs. Load (48V Input) Notes 1 For negative logic, add suffix “N” to model number. † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. Turn-On Time 10 ms Remote Shutdown Positive Logic Switching Frequency 500 kHz Isolation Input - Output 1500 VDC Input - Case 1050 VDC Output - Case 500 VDC Temperature Coefficient 0.03%/°C Case Temperature Operating Range -40 To +100°C Storage Range -40 To +125°C Thermal Shutdown Range 105 To 115°C Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g MTBF † (Bellcore TR-NWT-000332) 1.3 x 10
6 Hrs
Safety UL, CUL, VDE Weight (approx.) 2.4 oz General Setpoint Accuracy ±1% Line Regulation Vin Min. - Vin Max., Iout Rated, Output 1 0.2% V out Line Regulation Vin Min. - Vin Max., Iout Rated, Output 2 1.0% V out Load Regulation Iout Min. - Iout Max., Vin Nom., Output 1 0.5% V out Load Regulation Iout Min. - Iout Max., Vin Nom., Output2 1.0% V out Minimum Output Current 10% I out Rated Dynamic Regulation, Loadstep 25% I out Pk Deviation 4% V out Settling Time 500 µs Voltage Trim Range (5V/3.3V Units) ±10% Power Limit Threshold Range, % of Iout Rated 110 - 140% OVP Trip Range (Main Ouput) 115 - 140% V out Nom. Output
Natural Convection 6.6 °C/W 100 LFM 5.7 °C/W 200 LFM 4.2 °C/W 300 LFM 3.1 °C/W 400 LFM 2.6 °C/W Tolerances Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. HBD SERIES - DUAL OUTPUT , 60 WATT MECHANICAL DRA WING 1- V in
2 Case
7 Trim 2
10 Trim 1
Inches: (Millimeters) Pin: ± 0.002 ± 0.05 (Dimensions as listed unless otherwise specified.) Pin Function /K31/K30 /K39 /K38 /K37 /K36 /K35 /K34 /K33 /K32 /K31 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57 /K31/K2E/K35/K30/K30/K22/K28/K33/K38/K2E/K31/K6D/K6D/K29 /K31/K2E/K32/K30/K30/K22/K28/K33/K30/K2E/K35/K6D/K6D/K29 /K30/K2E/K39/K30/K30/K22/K28/K32/K32/K2E/K39/K6D/K6D/K29 /K30/K2E/K35/K30/K30/K22/K28/K31/K32/K2E/K37/K6D/K6D/K29 /K30/K2E/K32/K30/K30/K22/K28/K35/K2E/K31/K6D/K6D/K29 /K2D/K30/K2E/K31/K30/K30/K22/K28/K2D/K32/K2E/K35/K6D/K6D/K29 /K31/K2E/K37/K30/K30/K22/K28/K34/K33/K2E/K32/K6D/K6D/K29 /K2D/K30/K2E/K35/K30/K22/K28/K2D/K31/K32/K2E/K37/K6D/K6D/K29 /K2D/K30/K2E/K33/K30/K30/K22/K28/K2D/K37/K2E/K36/K6D/K6D/K29 /K31/K2E/K34/K30/K30/K22/K28/K33/K35/K2E/K36/K6D/K6D/K29 /K31/K2E/K30/K30/K30/K22/K28/K32/K35/K2E/K34/K6D/K6D/K29 /K30/K2E/K34/K30/K30/K22/K28/K31/K30/K2E/K32/K6D/K6D/K29 /K30 /K28/K31/K32/K2E/K37/K6D/K6D/K29 /K30/K2E/K35/K30/K22/K28/K30/K2E/K36/K6D/K6D/K29 /K2E/K30/K32/K35/K22 /K52/K45/K46/K2E /K28/K31/K2E/K30/K6D/K6D/K29 /K44/K49/K41 /K30/K2E/K30/K34/K30/K22 /K28/K34/K2E/K36/K6D/K6D/K29 /K30/K2E/K31/K38/K22 /K28/K36/K31/K2E/K30/K6D/K6D/K29 /K32/K2E/K34/K30 /K22 /K28/K35/K37/K2E/K39/K6D/K6D/K29 /K32/K2E/K32/K38 /K22 /K4D/K33/K58/K2E/K35 /K54/K48/K52/K4F/K55/K47/K48 /K34/K50/K4C /K4D/K4F/K55/K4E/K54/K49/K4E/K47 /K49/K4E/K53/K45/K52/K54/K53 /K30 /K28/K2D/K34/K2E/K38/K6D/K6D/K29 /K2D/K30/K2E/K31/K39/K22 /K28/K34/K38/K2E/K33/K6D/K6D/K29 /K31/K2E/K39/K30/K30/K22 Vin (Volts) Vin Range (Volts) Iin Max.* (Amps) Vout (Volts) Iout Rated (Amps) Ripple & Noise Pk-Pk (mV) Efficiency Typ. ** Model 1 8 - 3 6 1 8 - 3 6 1 8 - 3 6 3 4 - 7 5 3 4 - 7 5 3 4 - 7 5 2.89 4.54 3.02 1.51 1.62 2.27 3.3/2.5 5.0/3.3 5.0/3.3 5.0/3.3 3.3/2.5 5.0/3.3 75% 78% 80% 80% 75% 79% HBD040YED-A HBD060YGE-A HBD040YGE-A HBD040ZGE-A HBD040ZED-A HBD060ZGE-A Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. Note: Current can be drawn from either output to its maximum value, or from both outputs to a combined total of 15A. MODELS - (See the last page of this file for options.)
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD TTL “Low” Turns Module ON TTL “High” Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Term inal Strip TS XW S, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.