HBA2

HBA2 BOTHHAND | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Rev:20130522A Page 1 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Fea tures /circle6 7 pin SIP package /circle6 In put / Output Isolation Voltage: 6.4kVDC /circle6 High Efficiency /circle6 Lead Free Design, RoHS Compliant /circle6 Operating temperature: -40° C to +85° C /circle6 Optional Reinforced Isolation 8kVDC /circle6 Safety Standard / Approval : IEC / EN 60950-1 IEC / EN 60601-1 Tec hnical Specification All specifications are typical at nominal input, full load and 25° C unless otherwise stated. Output Current (mA) Input Current (mA) Model Number Reinforced Isolation 8kVDC Input Voltage Range(V) Output Voltage (V) Full Load No Load Full Load Eff .(2 ) (%) Capacitive Load, max.(3 ) (uF) HBA2-05S0H6 HBA2-05S0H8 3.3 600 55 0 76 3300 HBA2-05S1H6 HBA2-05S1H8 5 400 54 1 78 1200 HBA2-05SBH6 HBA2-05SBH8 7.2 278 52 6 80 1200 HBA2-05SAH6 HBA2-05SAH8 9 222 51 3 82 1200 HBA2-05S2H6 HBA2-05S2H8 12 167 51 3 82 680 HBA2-05S3H6 HBA2-05S3H8 15 132 51 3 82 680 HBA2-05D0H6 HBA2-05D0H8 ±3.3 ±300 53 5 78 ±1500 HBA2-05D1H6 HBA2-05D1H8 ±5 ±200 52 6 80 ±470 HBA2-05DBH6 HBA2-05DBH8 ±7.2 ±139 52 6 80 ±470 HBA2-05DAH6 HBA2-05DAH8 ±9 ±111 51 9 81 ±470 HBA2-05D2H6 HBA2-05D2H8 ±12 ±85 51 9 81 ±330 HBA2-05D3H6 HBA2-05D3H8 4.5 ~ 5.5 No minal: 5 ±15 ±66 513 82 ±330 HBA2-12S0H6 HBA2-12S0H8 3.3 600 22 3 78 3300 HBA2-12S1H6 HBA2-12S1H8 5 400 21 9 80 1200 HBA2-12SBH6 HBA2-12SBH8 7.2 278 21 3 82 1200 HBA2-12SAH6 HBA2-12SAH8 9 222 21 1 83 1200 HBA2-12S2H6 HBA2-12S2H8 12 167 21 1 83 680 HBA2-12S3H6 HBA2-12S3H8 15 132 21 1 83 680 HBA2-12D0H6 HBA2-12D0H8 ±3.3 ±300 21 7 80 ±1500 HBA2-12D1H6 HBA2-12D1H8 ±5 ±200 21 3 82 ±470 HBA2-12DBH6 HBA2-12DBH8 ±7.2 ±139 21 1 83 ±470 HBA2-12DAH6 HBA2-12DAH8 ±9 ±111 20 8 84 ±470 HBA2-12D2H6 HBA2-12D2H8 ±12 ±85 20 8 84 ±330 HBA2-12D3H6 HBA2-12D3H8 10.8 ~ 13.2 No minal: 12 ±15 ±66 206 85 ±330

Applications

These converters are well suitable for battery operated equipment, measurement equipment, telecom, wireless network, Industry control system, everywhere where isolated, tightly regulated voltages and compact size are required. Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 2 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Output Current (mA) Input Current (mA) Model Number Reinforced Isolation 8kVDC Input Voltage Range(V) Output Voltage (V) Full Load No Load Full Load Eff .(2 ) (%) Capacitive Load, max.(3 ) (uF) HBA2-15S0H6 HBA2-15S0H8 3.3 600 17 8 78 3300 HBA2-15S1H6 HBA2-15S1H8 5 400 17 5 80 1200 HBA2-15SBH6 HBA2-15SBH8 7.2 278 17 1 82 1200 HBA2-15SAH6 HBA2-15SAH8 9 222 16 9 83 1200 HBA2-15S2H6 HBA2-15S2H8 12 167 16 7 84 680 HBA2-15S3H6 HBA2-15S3H8 15 132 16 5 85 680 HBA2-15D0H6 HBA2-15D0H8 ±3.3 ±300 17 4 80 ±1500 HBA2-15D1H6 HBA2-15D1H8 ±5 ±200 17 1 82 ±470 HBA2-15DBH6 HBA2-15DBH8 ±7.2 ±139 16 9 83 ±470 HBA2-15DAH6 HBA2-15DAH8 ±9 ±111 16 7 84 ±470 HBA2-15D2H6 HBA2-15D2H8 ±12 ±85 16 7 84 ±330 HBA2-15D3H6 HBA2-15D3H8 13.5 ~ 16.5 No minal: 15 ±15 ±66 165 85 ±330 HBA2-24S0H6 HBA2-24S0H8 3.3 600 11 1 78 3300 HBA2-24S1H6 HBA2-24S1H8 5 400 11 0 80 1200 HBA2-24SBH6 HBA2-24SBH8 7.2 278 11 3 78 1200 HBA2-24SAH6 HBA2-24SAH8 9 222 11 3 78 1200 HBA2-24S2H6 HBA2-24S2H8 12 167 11 3 78 680 HBA2-24S3H6 HBA2-24S3H8 15 132 11 1 79 680 HBA2-24D0H6 HBA2-24D0H8 ±3.3 ±300 11 3 77 ±1500 HBA2-24D1H6 HBA2-24D1H8 ±5 ±200 11 0 80 ±470 HBA2-24DBH6 HBA2-24DBH8 ±7.2 ±139 11 4 77 ±470 HBA2-24DAH6 HBA2-24DAH8 ±9 ±111 11 3 78 ±470 HBA2-24D2H6 HBA2-24D2H8 ±12 ±85 11 0 80 ±330 HBA2-24D3H6 HBA2-24D3H8 21.6 ~ 26.4 No minal: 24 ±15 ±66 111 79 ±330 Input Specifications 5V nominal input 4.5~5.5V 12V nominal input 10 .8~13.2V 15V nominal input 13 .5~16.5V Input voltage V nominal input 21.6~26.4V Input filter Capacitor Environmental Specifications Operating ambient temperature -4 0° C to +85° C Maximum case temperature +9 5° C Storage temperature range -5 5° C to +125° C Relative humidity 95 % RH max. Output Specifications Output power 2 Watts max. Voltage accuracy Nominal Vin and full load ±5% max. Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 3 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Vo ltage balance Dual output ±1% max. Minimum load 0A Line regulation Fo r Vin change of 1% ±1.5% max. 10% max. 15% max. (5Vout models) Load Regulation 10 % load to full load 20% max. (3.3Vout models) Ripple and Noise (20MHz Bandwidth) 200mVp-p max. Maximum capacitive load Se e table Output short circuit protection 1 second General Specifications Efficiency No minal input and full load See table Isolation voltage In put to output 6400VDC (1 second) Isolation resistance 50 0VDC 10GΩ min. Isolation capacitance 10 pF max. Switching frequency 80 kHz max. Reliability, calculated MTBF 2×10 6 Hrs Physical Specifications Case material Plastic (UL94 V-0) Potting material Ep oxy (UL94 V-0) 0. 77 × 0.50 × 0.39 Inch Dimensions Weight 4.3g (0.15oz) typ. Note Io below this value will not damage these converters, however, they may not meet all listed specifications. 2. Typical value, tested at nominal input and full load. 3. For each output. Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 4 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Mechanical Dimensions Single output Dual output Spe cifications subject to change without notice. Pin Assignment Pin Single Dual 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout

6 No pin Common

Unit: mm (inch) To lerance: XX.XX ±0.25 (±0.01) Date Code 9.80 .39) 5.00 .20) 8.50 .33) Printed Fa ceHBAX-XXDXHX Pb 19.50 .77) 16.50 .65) 12.50 .50) 10.40 .41) 7.62 .30) 2.54 .10) 15.24 .60) 4.10 .162) 0.50 .02) 0.50 .02) 0.25 .01) 2.36 .093) 1.90 .075) 2.40 .094) HBAX-XXSXHX Pb 19.50 .77) 16.50 .65) 12.50 .50) 10.40 .41) 7.62 .30) 2.54 .10) 15.24 .60) 4.10 .162) Date Code 0.50 .02) 0.50 .02) 9.80 .39) 5.00 .20) 8.50 .33) Printed Fac e 0.25 .01) 2.36 .093) 1.90 .075) 2.40 .094) Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 5 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Test Configurations Al l specifications are typical at nominal input, full load and 25° C unless otherwise stated. ◎DC Power Supply: It offers a wide voltage and current range precisely. ◎Current meter (A): Accuracy/barb4right 200μA ~ 200mA 4 ranges+ (0.2% rdg + 2 digits) 00mA ~ 20A 2 ranges+ (0.3% rdg + 2 digits). ◎Vo ltage meter (V): Accuracy/barb4right +(0.03% rdg + 4 digits). ◎Lo ad: At full load. ◎Wires: The resistance of the wires must be small. 1. Input voltage range: Narrow input voltage range（ ±10 %） 、wide input voltage range (2:1 and 4:1） 。 EX: Narrow input voltage range （±10%） 5V nominal input /barb4right 4.5~5.5V 12V nominal input /barb4right 10.8~13.2V 24V nominal input /barb4right 21.6~26.4V Wide input voltage range 2:1 5V nominal input /barb4right 4.5~9V 12V nominal input /barb4right 9~18V 24V nominal input /barb4right 18~36V 48V nominal input /barb4right 36~75V Wide input voltage range 4:1 (W) 24V nominal input /barb4right 9~36V 48V nominal input /barb4right 18~75V 2. Input power : Pin = Vin x Iin Vin ：Inp ut voltage Iin ：Input current 3. Output power : Pout = Vout x Iout Vout ：Out put voltage Iout ：Output current 4. Efficiency : Pout: Output power Pin : Input power 5. Voltage accuracy: Vo ut：Output voltage Vo ut(nominal)：Nominal output voltage DC Power Supply A V LoadDC/DC converter V A DC Power Supply A V LoadDC/DC converter V A Vout x100% Efficiency = x1 00% Pout Pi n Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 6 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Noise Ripple Ripple&Noise . Line regulation: (1) Wide input voltage range and regulated output vol tage series. (2) Narrow input voltage range（±10 %）and unregulated output voltage series. ΔΔ ΔΔVout = Vout(+10%)-Vout(-10%) x100% Vo ut Vout(+10%)：Output voltage at Vin = 1.1xVin(nominal)&full load Vout(-10%)：Output voltage at Vin = 0.9xVin(nominal)&full load Vout：Output voltage at Vin = Vin(nominal)&full load ΔΔ ΔΔVin = Vin(+10%)-Vin(-10%) x100% Vi n(nominal) Vin(+10%)：Input voltage = 1.1xVin(nominal) Vin(-10%)：Input voltage = 0.9xVin(nominal) Vin(nominal)：Nominal Input voltage 7. Load regulation : Vo ut(FL) Vout(FL): Output voltage at full load Vout(NL): Output voltage at 25% full load or 10% full load 8. Ripple and Noise: as shown below. The bandwidth is 0-20MHz. ││Vo ut(LL)-Vout(HL)││ ││ Vout(LL) LL : Low Line input voltage HL: High Line input voltage x100% ΔΔΔΔV out ΔΔΔΔV in Line regulation= Bothhand USA sales@bothhandusa.com www.bothhandusa.com

Rev:20130522A Page 7 of 4 Isolated DC-DC Converters HBA2 Series -- 2Watt Ou tput Ripple&Noise measurement test circuit: as shown below. Co: usually 0.47uF. 9. Temperature derating curve : The DC-DC converter will operate over a wider temperat ure range if less power is drawn from the output and the device is already running. The temperature derating curve shows the operating power-temperature range. As shown below. Ambient Temp.TA (℃℃ ℃℃) 0. Switching frequency: The nominal operating frequency of the DC-DC converter s. 11. I nput to output isolation: The dielectric breakdown strength test between input a nd output circuits. This is the isolation voltage the device is capable of withstanding for a specified time, usually 1 second or 1 minute. LoadDC/DC converter Oscilloscope Copper strip Copper strip Co LoadDC/DC converter Oscilloscope Copper strip Copper strip LoadDC/DC converter Oscilloscope Copper strip Copper strip Co Output Power (%) Bothhand USA sales@bothhandusa.com www.bothhandusa.com