HB04U CANDD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Product Data Sheet 4.0 WATT UNREGULATED HIGH ISOLATION DC/DC CONVERTER

FEATURES

GGGGG HIGH ISOLATION - 3000V RATING GGGGG 8000V ISOLATION TEST VOLTAGE GGGGG BARRIER 100% PRODUCTION TESTED GGGGG LOW BARRIER CAPACITANCE - 10PF GGGGG LOW LEAKAGE CURRENT - 2µA MAX GGGGG INTERNAL FILTERING

APPLICATIONS

GGGGG BIOMEDICAL DATA ACQUISITION GGGGG INDUSTRIAL PROCESS CONTROL GGGGG ANALYTICAL MEASUREMENTS GGGGG GROUND LOOP ELIMINATION GGGGG INTRINSIC SAFETY SYSTEMS

DESCRIPTION

The HB04U Series is a low-cost, high-isolation voltage, unregu- lated, single and dual output DC/DC converter. The dielectric withstand characteristics of each converter is tested in produc- tion to ensure barrier integrity. The HB04U Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 100kHz driven push-pull oscillator is used to ensure stable frequency and non-saturating operation of the input stage. This means there are no high peak voltages or currents like other design topologies, which can reduce unit reliability. Reliability is further enhanced by the use of MOSPOWER transistors. These rugged devices permit higher frequency operation with less complicated drive circuitry than is possible with bipolar power transistors. Reduced parts count adds to the reliability of the HB04U Series. The high efficiency of the HB04U Series means less internal power dissipation. With less heat to dissipate, the HB04U Series can operate over a wider ambient temperature range with no degradation of reliable operation. The HB04U Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance at low cost. Power Electronics Division, United States

3400 E Britannia Drive, T ucson, Arizona 85706

Phone: 520.295.4100 Fax: 520.770.9369 Power Electronics Division, Europe C&D T echnologies (Power Electronics) Ltd. 132 Shannon Industrial Estate , Shannon, Co. Clare, Ireland MECHANICAL 0.040±.003" (1.02±0.08) 0.170" (4.32) MIN 0.400±0.010" (10.16) 1.00±0.015" (25.40±0.38) 2.00±0.015" (50.80±0.38) 0.015±0.005" (0.38) -VOUT-VIN +VIN +VOUT COMM Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" COMMON PIN: Not connected internally on single output models MARKED WITH: date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. HBO4U More product information and application notes are available on our website at www.cdpowerelectronics.com

NOMINAL RATED RATED INPUT CURRENT INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT NO LOAD RATED LOAD EFFICIENCY MODEL (V DC) (V DC) (mA) (mA) (mA) (%) HB04U05S05 5 5 800 60 1000 80 HB04U05S12 5 12 333 60 1000 80 HB04U05S15 5 15 267 60 1000 80 HB04U12S05 12 5 800 25 380 87 HB04U12S12 12 12 333 25 380 87 HB04U12S15 12 15 267 25 380 87 HB04U15S05 15 5 800 20 310 87 HB04U15S12 15 12 333 20 310 87 HB04U15S15 15 15 267 20 310 87 HB04U05D05 5 ±5 ±400 60 944 85 HB04U05D12 5 ±12 ±167 60 944 85 HB04U05D15 5 ±15 ±134 60 944 85 HB04U12D05 12 ±5 ±400 25 375 88 HB04U12D12 12 ±12 ±167 25 375 88 HB04U12D15 12 ±15 ±134 25 375 88 HB04U15D05 15 ±5 ±400 20 300 88 HB04U15D12 15 ±12 ±167 20 300 88 HB04U15D15 15 ±15 ±134 20 300 88 Note: Other input to output voltage options may be available. Please consult factory. ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 V DC 10.8 12 13.2 13.5 15 16.5 Reflected Ripple Current 35 mAp-p ISOLATION Rated Voltage 3000 V DC Test Voltage 60 Hz, 10 Seconds 8000 Vpk Resistance 10 G Ω Capacitance 10 pF Leakage Current V ISO= 240VAC, 60Hz 1.2 2 µArms OUTPUT Rated Power 4W Voltage Setpoint Accuracy ±3 ±5 % Temperature Coefficient ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 100 mVp-p BW = 10Hz to 2MHz 20 mVrms Line Regulation High Line to Low Line ±1.5 %/% Vin Load Regulation See performance curves GENERAL Switching Frequency 100 kHz Package Weight 22 g MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method Ground Benign T A = +25°C 200,000 Hr TEMPERATURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted.

The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. VOUT VS LOAD (5Vout Models) VOUT VS LOAD (±5Vout Models) VOUT VS LOAD (12Vout Models) VOUT VS LOAD (±12Vout Models) VOUT VS LOAD (15Vout Models) VOUT VS LOAD (±15Vout Models) EFFICIENCY VS LOAD 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) 25 50 75 1000 IOUT (%) VOUT VOUTVOUT VOUT VOUT 100 22.5 21.0 19.5 18.0 16.5 15.0 VOUT 22.5 21.0 19.5 18.0 16.5 15.0 7.5 7.0 6.5 6.0 5.5 5.0 7.5 7.0 6.5 6.0 5.5 5.0 Efficiency (%) TYPICAL PERFORMANCE CURVES ABSOLUTE MAXIMUM RATINGS

ORDERING INFORMATION

HB04U Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option HB04U xxyzz Q