HB01U05D05

HB01U CANDD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1 WATT UNREGULATED

FEATURES

GGGGG 2500Vrms ISOLATION TEST VOLTAGE GGGGG BARRIER 100% PRODUCTION TESTED GGGGG LOW BARRIER CAPACITANCE - 10pF GGGGG LOW LEAKAGE CURRENT - 2µA MAX GGGGG 24-PIN DIP AND SMD GGGGG INTERNAL FILTERING GGGGG NON-CONDUCTIVE CASE GGGGG LOW COST GGGGG LOW PROFILE - .375"

APPLICATIONS

GGGGG INDUSTRIAL PROCESS CONTROL GGGGG DC MOTOR DRIVE GGGGG INTRINSIC SAFETY SYSTEMS GGGGG GROUND LOOP ELIMINATION GGGGG MEDICAL EQUIPMENT GGGGG PORTABLE TEST EQUIPMENT GGGGG DATA ACQUISITION Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States

3400 E Britannia Drive, T ucson, Arizona 85706

Phone: 800.547.2537 Fax: 520.770.9369 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate , Shannon, Co. Clare, Ireland

DESCRIPTION

The HB01U Series offers a wide selection of input and output voltages to choose from. Each model is offered in a 24-pin DIP or SMD package and has an input to output isolation rating of 2500Vrms making it ideal for applica- tions requiring high isolation. The dielectric withstand characteristics of each converter are measured in pro- duction to ensure barrier integrity. The HB01U Series is ideal for applications where the output is susceptible to high voltage transients, such as motor drive and industrial process control applications. The low barrier capacitance gives excellent input to output dV/dt characteristics thus protecting the input control circuitry from peak transients appearing on the output. The HB01U Series uses a self-oscillating circuit design technology to realize low cost and high performance. The inherent current limiting capability of the high isolation design reduces high current stresses during start-up thus increasing the capacitive load capability while maintain- ing high reliability. As with all of our DC/DC converters, surface mount construction combined with extensive qualification test- ing assures low cost without sacrificing quality and reli- ability.

NOMINAL RATED RATED INPUT CURRENT INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT MIN LOAD RATED LOAD EFFICIENCY MODEL (V DC) ( V DC) (mA) (mA) (mA) (%) HB01U05S05 5 5 200 63 290 68 HB01U05S12 5 12 83 63 290 70 HB01U05S15 5 15 67 63 290 73 HB01U12S05 12 5 200 20 120 68 HB01U12S12 12 12 83 20 120 70 HB01U12S15 12 15 67 20 114 73 HB01U15S05 15 5 200 25 98 68 HB01U15S12 15 12 83 25 95 70 HB01U15S15 15 15 67 25 90 73 HB01U24S05 24 5 200 13 61 68 HB01U24S12 24 12 83 13 60 70 HB01U24S15 24 15 67 13 57 73 HB01U05D05 5 ±5 ±100 63 290 68 HB01U05D12 5 ±12 ±42 63 285 70 HB01U05D15 5 ±15 ±34 63 275 73 HB01U12D05 12 ±5 ±100 20 123 68 HB01U12D12 12 ±12 ±42 20 118 70 HB01U12D15 12 ±15 ±34 20 114 73 HB01U15D05 15 ±5 ±100 25 98 68 HB01U15D12 15 ±12 ±42 25 95 70 HB01U15D15 15 ±15 ±34 25 90 73 HB01U24D05 24 ±5 ±100 13 61 68 HB01U24D12 24 ±12 ±42 13 60 70 HB01U24D15 24 ±15 ±34 13 57 73 PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 V DC 10.8 12 13.2 V DC 13.5 15 16.5 V DC 20 24 30 V DC Reflected Ripple Current 35 mAp-p ISOLATION Rated Voltage 3535 VDC Test Voltage 60 Hz, 10 Seconds 2500 Vrms Resistance 10 G Ω Capacitance 10 pF Leakage Current V ISO= 240VAC, 60Hz 1 2 µArms OUTPUT Rated Power 1W Voltage Setpoint Accuracy ±3 ±5 % Temperature Coefficent ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 50 mVp-p BW =10Hz to 2MHz 25 mVrms Line Regulation High Line to Low Line ±1.5 %/% Vin Load Regulation See Performance Curves (Min Load =1mA) GENERAL Switching Frequency 160 kHz Package Weight 12 g MTTF per MIL-HDBK-217, Rev. F Circuit Stress Method Ground Benign T A = +25°C 2,000,000 Hr TEMPERATURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. ELECTRICAL SPECIFICATIONS

0.100±0.010" (2.54±0.25) 0.020±0.002" (0.51±0.05) 0.015±0.005" (0.38±0.13) 0.375±0.005" (9.52±0.13) 1.285±0.010" (32.64±0.25) 2423 22 1514 13 121110321 0.014±0.002" (.38±.25) 0.525±0.010" (13.34±0.25) 0.695±0.015" (17.65±0.38) 0°-15° 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.600" (15.24) 0.100±0.010" (2.54±0.25) 0.020±0.002" (0.51±0.05) 0.015±0.005" (0.38±0.13) 0.375±0.005" (9.52±0.13) 1.285±0.010" (32.64±0.25) 2423 22 1514 13 121110321 0.525±0.010" (13.34±0.25) SIDE VIEWS TOP VIEWS END VIEWS SMD PACKAGEDIP PACKAGE HB01UxxyzzY HB01UxxyzzZ NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. PIN CONNECTIONS PIN# SINGLES DUALS 1+ V OUT +VOUT 2- V OUT Common 3N U - V OUT 10 -V IN -VIN

11 NC NC

14 NC NC

21 NC NC

22 NU -V OUT

0.730" (18.54) 1.150" (29.21) 0.100" (2.54) 0.080" (2.03) 0.040" (1.02) 100 150 200 250 TEMPERATURE (°C) TIME (seconds) 235 °C MAX 220 190 30 sec MAX (>220°C) 90 sec MAX (>190°C) RECOMMENDED REFLOW PROFILE MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability.

*Note: Refer to Reflow Profile for SMD Models.

ORDERING INFORMATION

HB Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (5Vout Models) VOUT VS LOAD (±5Vout Models) VOUT VS LOAD (12Vout Models) VOUT VS LOAD (±12Vout Models) VOUT VS LOAD (15Vout Models) VOUT VS LOAD (±15Vout Models) EFFICIENCY VS LOAD 12 0 8 0 150 200 5.3 5.5 5.7 5.9 4.9 5.1 11 03 0 5 07 0 12.2 12.3 12.4 12.5 12.6 12.7 12 0 40 80 100 5.0 5.2 5.4 5.6 5.8 6.0 11 0 2 0 3 0 4 012.0 12.1 12.2 12.3 12.4 12.5 14.9 15.0 15.1 15.2 15.3 15.4 11 0 2 0 6 0 6 7 1 10 20 30 34 14.9 15.0 15.1 15.2 15.3 15.4 20 60 80 100 Vout (Volts) Vout (Volts) Vout (Volts) Vout (Volts) Vout (Volts) Vout (Volts) Efficiency (%) Load (mA) Load (mA) Load (mA) Load (mA)Load (mA) Load (mA) Load (mA) 100 60 90 5 40 5 The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications.