H802 INEOS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Acrylonitrile Butadiene Styrene (ABS) Contact us: Phone +49 (2133) 9309 – 168 INSTY.emea@ineos.com www.ineos-styrolution.com Page 1 of 3 Revision Date: 2016.01.17
APPLICATIONS
Automotive rear lamp housings Automotive decorations
FEATURES
DESCRIPTION
Novodur® H802 is a high heat injection molding grade with high stiffness, especially suitable for being painted. Property, Test Condition Standard Unit Values Rheological Properties Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 9.5 Mechanical Properties Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 18 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 8 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 18 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 8 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 100 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 80 Tensile Stress at Yield, 23 °C ISO 527 MPa 51 Tensile Strain at Yield, 23 °C ISO 527 % 2.8 Tensile Modulus ISO 527 MPa 2700 Flexural Strength, 23 °C ISO 178 MPa 80 Flexural Modulus, 23 °C ISO 178 MPa 2700 Hardness, Ball Indentation ISO 2039-1 MPa 115 Tensile Strain at Break, 23 °C ISO 527 % > 15 Thermal Properties Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 110 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 108
Acrylonitrile Butadiene Styrene (ABS) Contact us: Phone +49 (2133) 9309 – 168 INSTY.emea@ineos.com www.ineos-styrolution.com Page 2 of 3 Revision Date: 2016.01.17 Property, Test Condition Standard Unit Values Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 101 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 107 Coefficient of Linear Thermal Expansion ISO 11359 10 /°C 80 Electrical Properties Dissipation Factor (100 Hz) IEC 60250 10-4 60 Dissipation Factor (1 MHz) IEC 60250 10-4 100 Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 34 Relative Permittivity (100 Hz) IEC 60250 - 3.1 Relative Permittivity (1 MHz) IEC 60250 - 3 Comparative Tracking Index IEC 60112 V 600 Volume Resistivity IEC 60093 Ohm*m >1013 Surface Resistivity IEC 60093 Ohm >1015 Other Properties Density ISO 1183 kg/m³ 1050 UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB Burning rate (US-FMVSS), 2.0 mm ISO 3795 mm/min 55 Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7 Melt Temperature Range ISO 294 °C 230 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Injection Velocity ISO 294 mm/s 240 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Acrylonitrile Butadiene Styrene (ABS) Contact us: Phone +49 (2133) 9309 – 168 INSTY.emea@ineos.com www.ineos-styrolution.com Page 3 of 3 Revision Date: 2016.01.17 SUPPLY FORM Novodur® is delivered in the form of cylindrical, spherical, or cubical pellets. The bulk density of the pellets is from 0.55 to 0.65 g/cm³. Values may differ for special grades. Standard Packaging unit: 25 kg PE-bag on palette, shrunk or wrapped with PE film. In addition, delivery in larger units of up to 1000 kg (IBC = Intermediate Bulk Container) or silo trucks can be arranged. In dry areas with normal temperature control, Novodur pellets can be stored for relatively long periods of time without any change in mechanical properties. With unstable colors, however, storage over a number of years can give rise to some change in color. Under poor storage conditions, Novodur absorbs moisture, but this can be removed by drying. PRODUCT SAFETY No adverse effects on the health of processing personnel have been observed where the products are correctly processed and the production areas are suitably ventilated. For styrene, alpha-methylstyrene, acrylonitrile, and butyl acrylate the maximum allowable workplace concentrations must be observed according to the pertaining national regulations. In Germany, the following limit values are valid TRGS 900 (Aug. 2004): styrene, MAK-value: 20 ml/m³; alpha-methylstyrene, MAK-value: 100 ml/m³; acrylonitrile, TRK-value: 3 ml/m³, and butyl acrylate, MAK-value: 2 ml/m³ (1.7.2004). According to EU directive 67/548/EEC, Annex I (2001), acrylonitrile is classified as carcinogenic, category 2 (´substances which should be regarded as if they are carcinogenic to man´). Experience has shown that when Novodur® is processed correctly with appropriate ventilation, the levels are far below the limits mentioned above. Inhalation of the vapors of degradation products which can arise on severe overheating of the materials or during purging out should be avoided. Further information can be found in the Novodur safety data sheets. DISCLAIMER The aforementioned data shall constitute the agreed contractual quality of the product sold by INEOS Styrolution at the time of passing of risk. INEOS Styrolution does not make any further warranty, representation or guarantee of any kind, express or implied, regarding the suitability of the product for any particular purpose or application and INEOS Styrolution disclaims all liability in connection therewith. The customer himself is required to verify whether or not the product is suitable for the further processing or application intended and whether or not the product complies with the relevant statutory requirements. Unless explicitly and individually otherwise agreed in writing, INEOS Styrolution's sole and exclusive liability with respect to its products is set forth in INEOS Styrolution's General Terms and Conditions for Sale.