H5XX VERIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Sensor Power Induced from monitored conductor Frequency Range 50/60 Hz Humidity Range 10 to 90% RH non-condensing Temperature Range -15 to 50 °C (5 to 122 °F) Terminal Block Wire Size 24 to 14 AWG (0.2 to 2.1 mm2) Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m) WARRANTY Limited Warranty 5 years AGENCY APPROVALS Agency Approvals UL 508 closed type device listing, CAT III, Pollution Degree 2, basic insulation RELAY CONTACT RATINGS SPDT (NS) Models Resistive 15 A @ 277 Vac Motor 1 HP @ 120 Vac

1.5 HP @ 277 Vac

SPST (HOA) Models Resistive 15 A @ 250 Vac Motor 1 HP @ 120 Vac TYPICAL COIL PERFORMANCE Voltage AC DC

24 V 36 mA 36 mA

The Hawkeye 5xx Series combines an industrial grade load-switching relay, current status switch*, and Hand-Off-Auto (HOA) switch* in an easy-to-install remote enclosure, making the series ideal for monitoring, directly controlling, and troubleshooting the control wiring of fractional horsepower motors. In some models, the relay, current sensor, and HOA switch are combined in a series circuit. Once an H5xx is wired in series between the power source and motor, all three components are installed. The housing provides physical separation and multiple wiring exits to isolate control and high voltage wiring. An H5xx can be mounted directly on 2- or 4-gang junction boxes, nippled to a field enclosure, or stand alone.

APPLICATIONS

  • Monitoring status and controlling small motor loads that are not driven by a motor starter or contactor
  • Exhaust fans
  • Unit ventilators
  • Fan terminal units
  • Fan coil units
  • Recirculating pumps SPECIFICATIONS Maximize Reliability Minimize Installed Cost E150462 *Some models Remote mounted Remote mounted current status sensor* and command relay with or without HOA switch HOA HOA provides true relay control… ideal for troubleshooting control wiring Status sensor Combines status sensor,* command relay, and HOA switch in a single series circuit…one line connection for three devices SPST SPST relay is field-selectable for N.O. or N.C. operation Gang box mounting Mounts directly onto gang box, flush to existing enclosures and standalone Up to 1 HP All models rated up to

1 HP @ 120 Vac, NS Versions

1 HP @ 120 Vac and 1.5 HP @

277 Vac…one product for all

fractional HP motor control and status applications Current Monitoring | Field Mount Motor Control Device H5XX SERIES Combination Switching Relay, Current Status Switch, and HOA Switch* HQ0001771.H 0321

2.2" (55 mm)1.16" (30 mm) 4.25" (108 mm) 1.6" (39 mm) CL Wire Opening Wire Opening Wire Opening 1.2" (30 mm) 4.25" (108 mm) CL CL (Low Voltage Only) Line Voltage Wires Low Voltage Wires Only 1/2" Conduit Fitting Low Voltage Wires Only Line Voltage Wires 1/2" Conduit Fitting ENCLOSURE Nipple to Existing Enclosures Status Output & Relay Coil (Low Voltage Wires Only) Low Voltage Wires Only RS OC SO SP SC Line Voltage Wires MODEL AMPERAGE RANGE STATUS OUTPUT TRIP POINT RELAY RELAY COIL HOA SWITCH STATUS LEDS RELAY POWER LED UL H535 0.25 to 15A Relay Only SPST, Field-Selectable N.O/N.C.

24 Vac/dc

H535NS 0.25 to 15 A Relay Only SPDT •• •• H540 0.25 to 15 A N. O.,

1.0 A @ 30 Vac/dc

0.25 A or Less,

SPST, Field-Selectable H540NS 0.25 to 15 A N. O., 1.0A @ 30 Vac/dc Fixed SPDT •• •• H548 0.5 to 15 A N. O., 1.0A @ 30 Vac/dc

0.5 A or Less,

SPST, Field-Selectable H548NS 0.5 to 15 A N. O.,

ORDERING INFORMATION

DIMENSIONAL DRAWING MOUNTS DIRECTLY ON 4-GANG JUNCTION BOX Mounting Options MOUNTS DIRECTLY ON 2-GANG JUNCTION BOX Mounting Options MOUNTS DIRECTLY ON WALL OR PANEL Mounting Options ENCLOSURE MOUNT POWER SOURCE IN SERIES RELAY HOA SWITCH CURRENT SENSOR = CIRCUIT PATH EXHAUST FAN DIGITAL OUT 24 V STATUS IN CONTROLLER WIRING DIAGRAM Current Monitoring | H5xx SeriesCurrent Monitoring | Field Mount Motor Control Device HQ0001771.H 0321