FTR-H3 FUJITSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
(oe) FUJITSU THE POSSIBILITIES ARE INFINITE FTR-H3 SERIES RoHS compliant m@ FEATURES e Pin compatible with widely used VS and FTR-H1 series power relays Ultra silent relay with patented unique U-shape spring. Noise level is about 50dB at Scm. e Low profile (height 16.5 mm)/ cadmium free contacts e High isolation in small package —lInsulation distance : 8 mm (between coil and contacts) —Dielectric strength : 5,000 VAC —Surge strength 10,000 V An electric life of 100,000 operations at rated load (10A, » 250VAC, cos Phi 1) and satisfy at TV-5 standard Plastic materials —UL94 flame class V-0 e UL (conforms to UL508, 873), CSA (conforms to CSA22.2 No.14), VDE (conforms to VDE 0435, 0631, 0700, 0860) « Conforms to FIMKO, DEMKO Lead free and cadmium free contacts e Sealed type relay @ ORDERING INFORMATION FTIR-H3 A A 012 V [Example] (a) (b) (ce) (4) (e) (b) | Contact Arrangement LA 1 formA (c) | Coil Type LA ‘Standard type (d) Nominal Voltage 005 5 VDC 012 :12 VDC 009 9 VDC 024 124 VDC Ordering Code Actual Marking FTR-H3AA05V H3AA05V
Item FTR-H3AA ( )(_) Arrangement 1 FormA Material Silver alloy Style Single Resistance (initial) Max. 100 ohms (at 1A 6 VDC) Rating 10A 250 VAC / 30 VDC Contact t Max. carrying current 14A Max. switching power 2,500VA/300W Max. switching voltage 400VAC/300VDC Min. switching load 10mA SVDC Max. inrush current 78A 120VAC (at lamp load) Nominal power (at 20° C) 530mW Coil Operate power (at 20° C) 260mW Operating temperature -40° C to +75° C (no frost) Operate (without diode) Max. 10ms (at nominal voltage, without bounce) Time value Release (without diode) Max. 5ms (at nominal voltage, without bounce) Resistance (at 500VDC) Min. 1,000 Mohms. Dielectric | B/T contacts 1,000VAC, 1 minute Insulation Sti th Fengih | B/T coil and contacts | 5,000VAC, 1 minute Surge strength Standard 10,000V (at1.2x50 usec.) Mechanical 2x10’ operations minimum Life 5 7 sti 1x10® operations min. (10A 250VAC/30VDC) Electrical (resistive load) 2.5x10* operations min. (TV-5 rating) Vibration Misoperation 10 to 55 Hz at double amplitude of 1.65mm resistance Endurance 10 to 55 Hz at double amplitude of 3.3mm Shock Misoperation Min. 100m/s? (11+4ms) resistance Endurance Min. 1,000m/s? (61ms) Weight Approx. 12g Average sound pressure Approx. 50dB at 5cm
Coil Nominal Coil Resistance Operate Release Nominal Power Number Voltage (410%) Voltage Voltage (410%) 530mW Note: All values in the table are measured at 20°C
= DIMENSIONS 28.803 | | 43,7103 ! a I coh Pre-solder/ o q 0.3 0.9| 02 0.2 0.25 (2.75) 1 dil 35 20 75 © Schematics (BOTTOM VIEW) ; ( ] | oO | ! é | > | igo y ; 0 > | aD 5 3 @ PC board mounting hole layout (BOTTOM VIEW) a a ( re | Isls To Tx) 2 | | i? o> Unit: mm
RoHS Compliance and Lead Free Relay Information 1. General Information « Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http:/Avww fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter. pdf) * Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. e All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). e It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible), « “LF” is marked on each outer and inner carton. (No marking on individual relays). « To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. « Weill ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) 2. Recommended Lead Free Solder Profile « Recommended solder paste Sn-3,0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: —§ maximum 120°C Soldering: dip within 5 sec. at 260°C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360°C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity « Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker « Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test.
Fujitsu Components International Headquarter Offices Japan Europe Fujitsu Component Limited Fujitsu Components Europe B.V. Gotanda-Chuo Building Diamantiaan 25 3-5, Higashigotanda 2-chome, Shinagawa-ku 2132 W Hoofddorp Tokyo 141, Japan Netherlands Tel: (81-3) 5449-7010 Tel: (31-23) 5560910 Fax: (81-3) 5449-2626 Fax: (31-23) 5560950 Email: promothg@ft ed fujitsu.com Email: info@fceu fujitsu.com Web: www fel fujitsu.com ‘Web: http:/Awww fujitsu. com/emea/services/components/ North and South America Asia Pacific Fujitsu Components America, Inc. Fujitsu Components Asia Ltd. 250 E. Caribbean Drive 102E Pasir Panjang Road Sunnyvale, CA 94089 U.S.A. #04-01 Citilink Warehouse Complex Tel: (1-408) 745-4900 Singapore 118529 Fax: (1-408) 745-4970 Tel: (65) 6375-8560 Email: marcom@fcai fujitsu.com Fax: (65) 6273-3021 ‘Web: http:/Avww fujitsu.com/us/services/edevices/components/ Email: fcal@fcal. fujitsu.com ‘Web: http:/Avww.fujitsu.com/sg/services/micro/components/ ©2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 11/18/2005.