H22L FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Features

■ Black plastic housing ■ Choice of inverter or buffer output functions ■ Choice of open-collector or totem-pole output configuration ■ No contact switching ■ TTL/CMOS compatible output functions Part Number Definitions H22LTB, Totem-pole, buffer output H22LTI, Totem-pole, inverter output H22LOB, Open-collector, buffer output H22LOI, Open-collector, inverter output Package Dimensions D 0.129 (3.3) 0.119 (3.0) 0.433 (11.0) 0.422 (10.7) 0.315 (8.0) MIN 0.250 (6.36) 0.216 (5.50) 0.055 (1.40) 0.045 (1.14) 0.110 (2.8) 0.091 (2.3) 0.055 (1.40) 0.045 (1.14) 0.020 (0.51) (SQ) 0.472 (12.0) 0.457 (11.6) 0.249 (6.35) 0.243 (6.15) 0.39 (1.00) 0.34 (0.85) 0.103 (2.60) NOM Optical CL LC CL CL PIN 1 ANODE PIN 2 CATHODE PIN 3 V PIN 4 V PIN 5 GND CC O 0.100 (2.55) 0.080 (2.05) 0.100 (2.55) 0.080 (2.05)Notes: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Lead cross section is controlled between .050 (1.27) from the seating plane and the end of the leads.

H22L Series OPTOLOGIC® Optical Interrupter Switch ©1986 Fairchild Semiconductor Corporation www.fairchildsemi.com H22L Series Rev. 1.2 2 Absolute Maximum Ratings (TA = 25°C Unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Notes: 4. Derate power dissipation linearly 1.67mW/°C above 25°C. 5. Derate power dissipation linearly 2.50mW/°C above 25°C. 6. RMA flux is recommended. 7. Methanol or isopropyl alcohols are recommended as cleaning agents. 8. Soldering iron 1/16” (1.6mm) from housing. 9. As long as leads are not under any stress or spring tension. Symbol Parameter Rating Units TOTAL DEVICE TOPR Operating Temperature -40 to +85 °C TSTG Storage Temperature -40 to +85 °C TSOL-I Soldering Temperature (Iron)(6)(7)(8)(9) 240 for 5 sec °C TSOL-F Soldering Temperature (Flow)(6)(7)(9) 260 for 10 sec °C EMITTER IF Continuous Forward Current 50 mA VR Reverse Voltage 5 V PD Power Dissipation(4) 100 mW SENSOR IF Continuous Forward Current 50 mA IO Output Current 50 mA VCC Supply Voltage 4.0 to 16 V VO Output Voltage 30 V PD Power Dissipation(5) 150 mW

H22L Series OPTOLOGIC® Optical Interrupter Switch ©1986 Fairchild Semiconductor Corporation www.fairchildsemi.com H22L Series Rev. 1.2 3 Electrical/Optical Characteristics (TA = 25°C) Input/Output Table Symbol Part Number Test Conditions Min. Typ. Max Units VCC Operating Supply Voltage V CC 4.5 16 V INPUT DIODE VF Forward Voltage I F = 20mA 1.7 V IR Reverse Leakage Current V R = 5V 10 µA COUPLED ICC Operating Supply Current I F = 15mA or 0 mA, VCC = 16V 5 mA VOL Low Level Output Voltage H22LTB, H22LOB IF = 0mA, VCC = 5V, IOL = 16mA 0.4 V Low Level Output Voltage H22LTI, H22LOI IF = 15mA, VCC = 5V, IOL = 16mA 0.4 VOH High Level Output Voltage H22LTB IF = 15mA, VCC = 5 V, IOH = -1mA 2.4 V High Level Output Voltage H22LTI IF = 0mA, VCC = 5 V, IOH = -1mA 2.4 IOH High Level Output Current H22LOB IF = 15mA, VCC = 5 V, VOH = 30V 100 µA High Level Output Current H22LOI IF = 0mA, VCC = 5V, VOH = 30V — 100 IF(+) Turn on Threshold Current V CC = 5V — 15 mA IF(–) Turn off Threshold Current V CC = 5V 0.50 mA IF(+) / IF(–) Hysteresis Ratio 1.3 tPLH, tPHL Propagation Delay, H22LOI, H22LOB VCC = 5V, RL = 300Ω 6µ s Propagation Delay, H22LTI, H22LTB VCC = 5V, RL = 10 TTL Loads 6 tr, tf Output Rise and Fall Time, H22LOI, H22LOB VCC = 5V, RL = 300Ω 100 ns Output Rise and Fall Time, H22LTI, H22LTB VCC = 5V, RL = 10 TTL Loads 70 Part Number LED Output H22LTB On High H22LTB Off Low H22LTI On Low H22LTI Off High H22LOB On High H22LOB Off Low H22LOI On Low H22LOI Off High

H22L Series OPTOLOGIC® Optical Interrupter Switch ©1986 Fairchild Semiconductor Corporation www.fairchildsemi.com H22L Series Rev. 1.2 4 Circuit Schematics Open-Collector Output Buffer H22LOB CATHODE (2) GND (5) REGULATOR VOLTAGE VCC (3) VOUT (4)LA ANODE (1) ANODE (1) CATHODE (2) LA REGULATOR VOLTAGE GND (5) VOUT (4) VCC (3) ANODE (1) CATHODE (2) LA REGULATOR VOLTAGE GND (5) VOUT (4) VCC (3) ANODE (1) CATHODE (2) REGULATOR VOLTAGE LA VCC (3) VOUT (4) GND (5) Open-Collector Output Inverter H22LOI Totem-PoleOutput inverter H22LTI Totem-Pole Output Buffer H22LTB

H22L Series OPTOLOGIC® Optical Interrupter Switch ©1986 Fairchild Semiconductor Corporation www.fairchildsemi.com H22L Series Rev. 1.2 7 .1 uf bypass GND Pulse Generator V = 5V f = 10 KHz d.c. = 50% O 1R = 300Ω R = 360Ω2 1C = 15pF C = 20pF 2 stray wire capacitance C and C include probe and12 Switching Speed Test Circuit PLH r t PHLt 50% 90% 10% OHV OLV 10% 90% 50% Output VO t ft 0mA OH PHL 0mA t V PLH 50% t 10% 90% 90% 10% rtft Output OV OLV -VIN RIN .1 uF bypass LR VCC GND OV Typical Operating Circuit Switching Test Curve for Buffers Switching Test Curve for Inverters

H22L Series OPTOLOGIC® Optical Interrupter Switch ©1986 Fairchild Semiconductor Corporation www.fairchildsemi.com H22L Series Rev. 1.2 8 Rev. I28 TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK FACT Quiet Series™ FACT FAST® FastvCore™ FPS™ FRFET Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroPak™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise TinyBoost™ TinyBuck™ TinyLogic TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC UniFET™ VCX™ Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.