G0505S-2WR2 MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

G_S-2WR2 H_S-2WR2 Series 201 03.07-A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Selection Guide C ertification Part No. Input V oltage (VDC) Output Efficiency (%, Min./T yp.) Full Load Max. Capacitive Load µ Nomina l (Range) Output V oltage(VDC) Output C urrent (mA)(Max./Min.) UL/CE (Pending G0505S-2W 4.5-5.5) 200/ 470 G0509S-2W 111/ 470 G0512S-2W 83/ 220 G0515S-2W 67/ 220 H0505S-2W 1000 H0512S-2W 470 H0515S-2W 470 G1205S-2W 10.8-13.2 200/ 470 G1209S-2W 111/ 470 G1212S-2W 83/ 220 G1215S-2W 67/ 220 H1205S-2W 1000 H1212S-2W 470 H1215S-2W 470 G2405S-2W 21.6-26.4 200/ 470 G240 S-2W 111/ 470 G2412S-2W 83/ 220 G2415S-2W 67/ 220 H2405S-2W 1000 H2412S-2W 470 H2415S-2W 470 Note The capacitive loads of positive and negative outputs are identical. W F ixed input voltage 4200 V A C or 6000VDC isolated unregulated positive-negative dual/ single output Patent Protection RoHS

FEATURES

R einforced insulation The patient leakage current Max µ A Isolation voltage: 4200 V A C or 6000VDC Operating temperature range: Internal surface mounted design International standard pin out Meets EN60601-1, ANSI/AAMI ES60601-1 standards Pending (1xMOPP/2xMOOP) G_S-2W H_S-2W s eries meet reinforced insulation requirements It is specially designed for

applications

c ompact size high isolation, l ow isolation capacitor and l ow leakage current power It is widely used in m edical electricity IGBT driver and so on It is suitable for 1.Where the voltage of the input power supply is stable (voltage variation: 10%Vin); 2.Where isolation is necessary between input and output (isolation voltage 4200VAC or 6000VDC); 3.Where do not has high requirement of line regulation and the ripple noise of the output voltage Such as: Medical collection and isolation High voltage collection circuit IGBT- driven circuits etc.

G_S-2WR2 H_S-2WR2 Series 201 03.07-A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Input S pecifications Item Operating C onditions Min. Typ. Max. Unit Input C urrent (no load full load) input 520 80/-- mA 12V input 217 40/-- 24V input 25/-- Surge Voltage (1sec. max.) input -0.7 VDC 12V input -0.7 24V input -0.7 Reflected Ripple Current 0.2 A Input F ilter Capacitor filter Output S pecifications Item Operating C onditions Min. Typ. Max. Unit Output V oltage A ccuracy See tolerance envelope graph (Fig. Line R egulation Input voltage change: 1.2 Load R egulation 10%-100% load 5VDC output 9VDC output 12VDC output 15VDC output Ripple N oise* 20MHz bandwidth 100 150 mVp-p Temperature D rift C oefficient 100% full load 0.0 Output S hort C ircuit P rotection s Note: *Ripple and noise tested with parallel cable method please see DC-DC Converter Application Notes for specific operation methods **Supply voltage must be discontinued at the end of short circuit duration which less than 3s. General S pecifications Item Operating C onditions Min. Typ. Max. Unit Isolation V oltage Input-output, with the test time of minute 4200 V A C 6000 V D C P atient L eakage C urrent 250VAC 50/60Hz μ A Isolation R esistance Input-output, i solation voltage 500VDC 1000 M Ω Isolation C apacitance Input-output, 100KHz/0.1V pF Operating T emperature -40 Storage T emperature -55 125 Casing Temperature Rise Ta=25 Pin W elding R esistance T emperature Welding spot is 1.5mm away from the casing, seconds 300 Storage H umidity Non-condensing Switching F requency 100% load, nominal input voltage 100 KHz MTBF MIL-HDFK-217F@25 350 K hours Transformer Creepage mm Transformer Clearance PCB Creepage Clearance 5.5 Note:1 Patient leakage current and reinforced insulation is based on a 250 VAC, Hz system input voltage. The UL certification (ANSI/AAMI ES60601-1, File No. E347375) of G_S- WR2 H_S- WR2 series is pending, G_S- WR2 H_S- WR2 series meets 1xMOPP/2xMOOP when system input voltage is with 250VAC 50/60Hz. Physical S pecifications Casing M aterial Black flame-retardant and heat-resistant plastic (UL94 V Package D imensions 9.80 12.50 mm Weight 4.2 g(Typ.) C ooling Method Free air convection

G_S-2WR2 H_S-2WR2 Series 201 03.07-A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Product C haracteristic C urve 5VDC output -10% 80% 20% 10% 40% 60% -5% +5% +10% +15% 100% Typ Min. Max. -7.5% -2.5% +2.5% Tolerance Envelope Curve Output Current Percent (Nominal Input Voltage) Output Voltage Accuracy Other output -10% 80% 20% 10% 40% 60% -5% +5% +10% +15% 100% Typ Min. Max. -7.5% -2.5% +2.5% Output Current Percent (Nominal Input Voltage) Output Voltage Accuracy Tolerance Envelope Curve Fig. Operating Temperature( ) Temperature Curve Output Power Percentage(%) -40 100 120 Safe Operating Area 120 Fig. EMC S pecifications EMI Conducted e mission CISPR22/EN55022 CLASS B (see Fig. for recommended circuit) Radiated emission CISPR22/EN55022 CLASS B (see Fig. for recommended circuit) EMS Electrostatic discharge IEC/EN61000-4-2 Contact KV perf. Criteria B

G_S-2WR2 H_S-2WR2 Series 201 03.07-A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Design R eference Typical application If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.3. Moreover, choosing suitable filter capacitor is very important, start-up problems may be caused by too large capacitance. To ensured the modules running well, the recommended capacitive load values as shown in Table The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series see Fig S in g l e V in G N D +Vo V D C C in D C C ou t D u a l V in G N D +Vo V D C C in D C C out C ou t -Vo Fig. Single Vin GND +Vo DC DC REG REG Vin GND +Vo DC DC -Vo REG REG REG Dual Fig. Recommended capacitive load value table (Table Vin (VDC) Cin µ Single Vout (VDC) Cout µ Dual Vout (VDC) Cout µ 4.7 4.7 2.2 2.2 2.2 EMC typical recommended circuit (CLASS V in G N D + Vo - Vo ( ) 0 V D C /D C LO A D LD M C 1 C 2 C 3 D C P o w e r S u p p ly Fig. R ecommended typical circuit parameters Input voltage (V) EMI ,C2 4.7 µ F /50V C R efer to the Cout in Fig.3 LDM 6.8 µ H µ H Output load requirements In order to ensure the converter can work reliably with high efficiency, the minimum load should not less than 10% rated load when it is used. If the needed power is indeed small, please parallel a resistor on t the output side The sum of the efficient power and resistor consumption power is not less than 10%). For more information please find the application note s on www.mornsun-power.com

G_S-2WR2 H_S-2WR2 Series 201 03.07-A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation D imensions and R ecommended L ayout Notes: Packing Information please refer to 'Product Packing Information'. Packing bag number: 58200013 If the product is operated under the min. required load, the product performance cannot be guaranteed to comply with all performance indexes in this datasheet The max. capacitive load should be tested within the input voltage range and under full load conditions; Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25 humidity<75% when inputting nominal voltage and outputting rated load; All index testing methods in this datasheet are based on our Company s corporate standards; We can provide product customization service and please directly contact our technicians for specific information; Specifications of this product are subject to changes without prior notice. M ORNSUN Guangzhou Science Technology Co., Ltd. Address: No. Kehui St. Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn