H11L1D QT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
1Motorola Optoelectronics Device Data /C0054/C0045/C0080/C0105/C0110 /C0068/C0073/C0080 /C0079/C0112/C0116/C0111/C0105/C0115/C0111/C0108/C0097/C0116/C0111/C0114/C0115 /C0076/C0111/C0103/C0105/C0099 /C0079/C0117/C0116/C0112/C0117/C0116 The H11L1 and H11L2 have a gallium arsenide IRED optically coupled to a high–speed integrated detector with Schmitt trigger output. Designed for applications requiring electrical isolation, fast response time, noise immunity and digital logic compatibility.
- Guaranteed Switching Times — ton, toff < 4 µs
- Built–In On/Off Threshold Hysteresis
- High Data Rate, 1 MHz Typical (NRZ)
- Wide Supply Voltage Capability
- Microprocessor Compatible Drive
- To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
- Interfacing Computer Terminals to Peripheral Equipment
- Digital Control of Power Supplies
- Line Receiver — Eliminates Noise
- Digital Control of Motors and Other Servo Machine Applications
- Logic to Logic Isolator
- Logic Level Shifter — Couples TTL to CMOS MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit INPUT LED Reverse Voltage VR 6 Volts Forward Current — Continuous Forward Current — Peak Pulse Width = 300 µs, 2% Duty Cycle IF 60 1.2 mA Amp LED Power Dissipation @ TA = 25°C Derate above 25°C PD 120 1.41 mW mW/ °C OUTPUT DETECTOR Output Voltage Range Vo 0–16 Volts Supply Voltage Range VCC 3–16 Volts Output Current IO 50 mA Detector Power Dissipation @ TA = 25°C Derate above 25°C PD 150 1.76 mW mW/ °C TOTAL DEVICE Total Device Dissipation @ TA = 25°C Derate above 25°C PD 250 2.94 mW mW/ °C Maximum Operating T emperature(2) TA –40 to +85 °C Storage Temperature Range(2) Tstg –55 to +150 °C Soldering T emperature (10 s) TL 260 °C Isolation Surge Voltage (Pk ac Voltage, 60 Hz, 1 Second Duration)(1) VISO 7500 Vac(pk) 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Preferred devices are Motorola recommended choices for future use and best overall value. GlobalOptoisolator is a trademark of Motorola, Inc. Order this document by H11L1/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA GlobalOptoisolator Motorola, Inc. 1995 /C0072/C0049/C0049/C0076/C0049 /C0072/C0049/C0049/C0076/C0050 *Motorola Preferred Device SCHEMATIC [IF(on) = 10 mA Max] /C0042 STANDARD THRU HOLE CASE 730A–04 STYLE 5 PLASTIC [IF(on) = 1.6 mA Max] PIN 1. ANODE 2. CATHODE 3. NC 4. OPEN COLLECTOR OUTPUT 5. GND 6. VCC 6 1 REV 1
2 Motorola Optoelectronics Device Data
1.Always design to the specified minimum/maximum electrical limits (where applicable). 2.For this test, IRED Pins 1 and 2 are common and Output Gate Pins 4, 5, 6 are common.
- RL value effect on switching time is negligible.
Figure 1. Switching Test Circuit
Figure 2. Transfer Characteristics for H11L1 Figure 3. Threshold Current versus Supply Voltage Figure 4. Threshold Current versus Temperature Figure 5. Output Voltage, Low versus Load Current Figure 6. Supply Current versus Supply Voltage
0 IF = 0 mA
/C0072/C0049/C0049/C0076/C0049 /C0072/C0049/C0049/C0076/C0050
4 Motorola Optoelectronics Device Data
CASE 730A–04 ISSUE G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 6 4 1 3 –A– –B– SEATING PLANE –T–
4 PLF
K CN G
6 PLD
6 PLE
MAM0.13 (0.005) B MT L M
6 PLJ
MBM0.13 (0.005) A MT DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.320 0.350 8.13 8.89 B 0.240 0.260 6.10 6.60 C 0.115 0.200 2.93 5.08 D 0.016 0.020 0.41 0.50 E 0.040 0.070 1.02 1.77 F 0.010 0.014 0.25 0.36 G 0.100 BSC 2.54 BSC J 0.008 0.012 0.21 0.30 K 0.100 0.150 2.54 3.81 L 0.300 BSC 7.62 BSC M 0 15 0 15 N 0.015 0.100 0.38 2.54 /C0095 /C0095 /C0095 /C0095 STYLE 5: PIN 1. ANODE 2. CATHODE 3. NC 4. OUTPUT 5. GROUND 6. V CC CASE 730C–04 ISSUE D –A– –B– /C0083 SEATING PLANE –T– J K L 6 PL MBM0.13 (0.005) A MT C D 6 PL MAM0.13 (0.005) B MT H G E 6 PL F 4 PL NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.320 0.350 8.13 8.89 B 0.240 0.260 6.10 6.60 C 0.115 0.200 2.93 5.08 D 0.016 0.020 0.41 0.50 E 0.040 0.070 1.02 1.77 F 0.010 0.014 0.25 0.36 G 0.100 BSC 2.54 BSC H 0.020 0.025 0.51 0.63 J 0.008 0.012 0.20 0.30 K 0.006 0.035 0.16 0.88 L 0.320 BSC 8.13 BSC S 0.332 0.390 8.43 9.90 *Consult factory for leadform option availability
/C0072/C0049/C0049/C0076/C0049 /C0072/C0049/C0049/C0076/C0050 5Motorola Optoelectronics Device Data *Consult factory for leadform option availability NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. CASE 730D–05 ISSUE D 6 4 1 3 –A– –B– N C KG F 4 PL SEATING D 6 PL E 6 PL PLANE –T– MAM0.13 (0.005) B MT L J DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.320 0.350 8.13 8.89 B 0.240 0.260 6.10 6.60 C 0.115 0.200 2.93 5.08 D 0.016 0.020 0.41 0.50 E 0.040 0.070 1.02 1.77 F 0.010 0.014 0.25 0.36 G 0.100 BSC 2.54 BSC J 0.008 0.012 0.21 0.30 K 0.100 0.150 2.54 3.81 L 0.400 0.425 10.16 10.80 N 0.015 0.040 0.38 1.02
/C0072/C0049/C0049/C0076/C0049 /C0072/C0049/C0049/C0076/C0050
6 Motorola Optoelectronics Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 H11L1/D /C0042/C0072/C0049/C0049/C0076/C0049/C0047/C0068/C0042