H11B1S FAIRCHILD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
DESCRIPTION
The CNX48U, H11BX, MOC8080 and TIL113 have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113
APPLICATIONS
- Low power logic circuits Telecommunications equipment Portable electronics Solid state relays Interfacing coupling systems of different potentials and impedances. 6/1/00 200042A
FEATURES
High sensitivity to low input drive current Meets or exceeds all JEDEC Registered Specifications VDE 0884 approval available as a test option 1 6 EMITTER COLLECTOR ANODE CATHODE
6 BASE
Parameter Symbol Device Value Units TOTAL DEVICE TSTG All -55 to +150 °CStorage Temperature Operating Temperature T OPR All -55 to +100 °C Lead Solder Temperature T SOL All 260 for 10 sec °C Total Device Power Dissipation @ TA = 25°C PD All 250 mW Derate above 25°C 3.3 mW/ °C EMITTER IF All 100 mAContinuous Forward Current Reverse Voltage V R All 6 V Forward Current - Peak (300 µs, 2% Duty Cycle) I F(pk) All 3.0 A LED Power Dissipation @ TA = 25°C PD All 100 mW Derate above 25°C 1.8 mW/ °C DETECTOR CNX48U, TIL113 30 H11B1, H11B2 Collector-Emitter Breakdown Voltage BVCEO H11B3 V H11B255 55MOC8080 CNX48U, H11B1 H11B2, H11B3 30 V Collector-Base Breakdown Voltage BV CBO TIL113 H11B255
55 VMOC8080
Emitter-Collector Breakdown Voltage BV ECO All 7 V Detector Power Dissipation @ TA = 25°C PD All 150 mW Derate above 25°C 2.0 mW/ °C
Parameter Test Conditions Symbol Device Min Typ Max Unit EMITTER H11B1, H11B2 (IF = 10 mA) H11B255 0.8 1.2 1.5 MOC8080 Input Forward Voltage V F TIL113 V(IF = 10 mA) CNX48U 1.2 1.3 (IF = 10 mA, TA = -55°C) MOC8080 0.9 1.3 1.7 (IF = 10 mA, TA = 100°C) 0.7 1.05 1.4 (IF = 50 mA) H11B3 1.35 1.5 Reverse Leakage Current (V R = 6 V) I R All 0.001 10 µA Capacitance (V F = 0 V, f = 1.0 MHz) C All 50 pF DETECTOR (IC = 1 mA, IF = 0) CNX48U 30 60 Collector-Emitter (IC = 100 µA, IF = 0) BVCEO TIL113 Breakdown Voltage (I C = 10 mA, IF = 0) H11B1, H11B2 25 60 V H11B3 (IC = 100 µA, IF = 0) H11B255 55 70(IC = 1 mA, IF = 0) MOC8080 CNX48U, H11B1 Collector-Base (IC = 100 µA, IE = 0) H11B2, H11B3 30 100 Breakdown Voltage BVCBO TIL113 V (IC = 100 µA, IF = 0) H11B255 55 100MOC8080 Emitter-Collector (IE = 100 µA, IB = 0) BV ECO All 7 10 VBreakdown Voltage Collector-Emitter (VCE = 10 V, Base Open) I CEO All 1 100 nADark Current INDIVIDUAL COMPONENT CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113 Note Typical values at T A = 25°C
Characteristic Test Conditions Symbol Min Typ Max Units Input-Output Isolation Voltage(2) (II-O 61 µA, Vrms, t = 1 min.) 5300 Vac(rms) Isolation Resistance(2) (VI-O = 500 VDC) R ISO 1011 1 Isolation Capacitance(2) (VI-O = , f = 1 MHz) C ISO 0.8 pf ISOLATION CHARACTERISTICS DC Characteristics Test Conditions Symbol Device Min Typ Max Units (IF = 10 mA, VCE = 5 V) MOC8080 50 (500) H11B255 10 (100) (IF = 10 mA, VCE = 1 V) CNX48U 60 (600) Collector Output TIL113 30 (300) Current(1) IC (CTR) H11B1 5 (500) mA (%) (IF = 1 mA, VCE = 5 V) H11B2 2 (200) H11B3 1 (100) (IF = 1 mA, VCE = 1 V) CNX48U 5 (500) (IF =1 mA, IC = 1 mA) H11B1, H11B2 1.0H11B3, MOC8080 Saturation Voltage (I F = 5 mA, IC = 10 mA) V CE(sat) CNX48U 1.0 V (IF = 50 mA, IC = 50 mA) H11B255 1.0 (IF = 8 mA, IC = 2 mA) TIL113 1.25 AC Characteristics ton H11B1 25(IC = 10 mA, VCE = 10 V) H11B2 (RL = 100 1) (Fig.7) toff H11B255 18H11B3 (IF = 10 mA, VCC = 5 V) ton 3.5 toff 36 Switching Times (Fig. 8) µs(IF = 1 mA, VCC = 5 V) ton CNX48U 70 (RE = 1k1), (RBE = 10M1) toff 190(Fig. 8) (IF = 5 mA, VCC = 10 V) t on MOC8080 3.5 (RL = 100 1) (Fig.7) t off 25 (IF = 200 mA, IC = 50 mA) ton 0.35 5 (VCC = 10 V) (RL = 100 1) toff TIL113 55 100(Fig.7) 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113 TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise specified.) Note ** Typical values at T A = 25°C
Fig. 6 Turn-Off Time vs. Input Current IF - LED INPUT CURRENT (mA) 0.1 1 10 100 TOFF TIME (µs) 100 1000 VCC = 10 V RL = 100 1 RL = 1 k1 RL = 10 1 Fig. 3 Collector Current vs. Collector-Emitter Voltage VCE- COLLECTOR -EMITTER VOLTAGE (V) 0123456789 1 0 IC - COLLECT OR CURRENT (NORMALIZED) IF = 10 mA IF = 5 mA IF = 2 mA IF = 1 mA NORMALIZED TO: IF = 1 mA VCE = 5 V Fig. 5 Turn-On Time vs. Input Current IF - LED INPUT CURRENT (mA) TON - TIME (µs) 0.1 1 10 100 0.1 100 1000 RL = 100 1 RL = 1 k1 RL = 10 1 VCC = 10 V TA - AMBIENT TEMPERATURE (˚C) ICEO - COLLECT OR-EMITTER DARK CURRENT (nA) Fig. 4 Dark Current vs. Ambient Temperature 0 2 04 06 08 0 1 0 0 0.01 0.1 100 1000 10000 VCE = 10 V Fig. 1 Output Current vs. Input Current IF - LED INPUT CURRENT (mA) 0.1 1 10 100 CTR - CURRENT TRANSFER RA TIO (NORMALIZED) 0.1 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 5 V TA = 0˚C, 25˚C TA = 70˚C TA = 100˚C TA = -55˚C TA - AMBIENT TEMPERATURE (˚C) Fig. 2 Current Transfer Ratio vs. Ambient Temperature -80 -60 -40 -20 0 20 40 60 80 100 120 CTR - CURRENT TRANSFER RA TIO (NORMALIZED) 0.1 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 10 V PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113
I F INPUT OUTPUT 1.5 V Fig. 7 Switching Time Test Circuit and Waveforms (All devices except CNX48U) 5 V INPUT VCC RL RIN VCC RE RBE OUTPUT 501 90% 10% t on offt INPUT 90% t on 10% offt Fig. 8 Switching Time Test Circuit and Waveforms (CNX48U only) Test Circuit (All devices except CNX48U) Switching Waveforms (All devices except CNX48U) Test Circuit (CNX48U only) Switching Waveforms (CNX48U only) TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES (25°C Free air temperature unless otherwise specified) (Cont.) Notes 1. The current transfer ratio(I C/IF) is the ratio of the detector collector current to the LED input current with V CE @ 10 V. 2. For this test, LED pins 1 and 2 are common and phototransistor pins 4,5 and 6 are common. PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113
Lead Coplanarity : 0.004 (0.10) MAX 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 0.300 (7.62) TYP 0.405 (10.30) MAX 0.315 (8.00) MIN 0.016 (0.40) MIN PIN 1 ID. 0.016 (0.41) 0.008 (0.20) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.165 (4.18) 0.020 (0.51) MIN 0.100 (2.54) TYP 0.020 (0.51) MIN 0.350 (8.89) 0.330 (8.38) 0.270 (6.86) 0.240 (6.10) PIN 1 ID. 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.115 (2.92) 0.300 (7.62) TYP0° to 15° 0.154 (3.90) 0.100 (2.54) SEAT ING PLAN E 0.016 (0.40) 0.008 (0.20) SEATING PL ANE 0.016 (0.40) 0.008 (0.20) 0.070 (1.78) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 0.154 (3.90) 0.100 (2.54) 0.200 (5.08) 0.115 (2.92) 0.004 (0.10) MIN 0.270 (6.86) 0.240 (6.10) 0.400 (10.16) TYP 0.016 (0.41) 0.100 (2.54) TYP NOTE All dimensions are in inches (millimeters) 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54) Package Dimensions (Surface Mount)Package Dimensions (Through Hole) Package Dimensions (0.4”Lead Spacing) Recommended Pad Layout for Surface Mount Leadform PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113
S .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel W .W 0.4” Lead Spacing 300 .300 VDE 0884 300W .300W VDE 0884, 0.4” Lead Spacing 3S .3S VDE 0884, Surface Mount 3SD .3SD VDE 0884, Surface Mount, Tape & Reel Option Order Entry Identifier Description 4.0 ± 0.1 Ø1.55 ± 0.05 User Direction of Feed 4.0 ± 0.1 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 13.2 ± 0.2 4.85 ± 0.20 0.1 MAX 10.30 ± 0.20 9.55 ± 0.20 Ø1.6 ± 0.1 QT Carrier Tape Specifications (“D” Taping Orientation)
ORDERING INFORMATION
All dimensions are millimeters PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 H11B2 H11B255 H11B3 MOC8080 TIL113
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. www.fairchildsemi.com © 2000 Fairchild Semiconductor Corporation 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS