DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
SPE-17-08-027/A/WY Page 1 of 13 Specification Part No : GPSF.36.7.A.30 Product Name : GPS L1/L2 36mm Single Feed Stacked Patch Passive Antenna Low AR Features : Highest Accuracy Low AR < 2.7 GPS Antenna GPS L1+L2 Band Operation Single Feed Patch Assembly L1:1575MHz; AR 1.69 @1575.42 MHz L2:1227MHz; AR 2.70 @1227.6MHz Dims: 36*36*7mm Tuned for Centre Positioning on a 70*70mm Ground-plane Through-Hole Mounting Pin Type RoHS Compliant
SPE-17-08-027/A/WY Page 2 of 13 1. Introduction The GPSF.36.7.A.30 is a 36x36mm ceramic GPS L1/ L2 low profile, low axial -ratio, embedded stacked passive patch antenna with a 7mm height . It is designed as a high performance yet economical solution for highest accuracy centimeter level tracking in telematics applications. Typical applicable industries are - UAVs and Drones - Transportation - Autonomous Vehicles - Marine - Agriculture - Navigation This compact antenna exhibits excellent gain and radiation pattern stability on both L1 and L2 bands, improved reliability of a GPS fix in urban areas, better signal reception with more satellites acquired, and a quicker time to first fix. The antenna has been tuned and tested on a 70 X 70 mm ground plane, working at GPS can be easily through-hole mounted on PCB via pin . The double-sided adhesive on the bottom of the patch helps to keep it in place while being assembled. For further optimization to customer specific device environments, a custom tuned patch antenna and circuit integration service into your device can be supplied, subject to NRE and MOQ. Contact your regional Taoglas office for this requirement, and for sup port to integrate and test this antenna’s performance in your device.
SPE-17-08-027/A/WY Page 3 of 13 2. Specification ELECTRICAL GPS L1 GPS L2 Center Frequency 1575.42 MHz 1227.60 MHz Return loss (dB) < -10 < -10 Efficiency (%) 91.30 67.57 Peak Gain (dBi) 5.44 3.10 Axial Ratio at Zenith 1.69 2.70 Impedance 50 Ohm Polarization RHCP MECHANICAL Ceramic Dimension GPS L1 GPS L2 25*25*4mm 36*36*3 mm Pin Diameter 0.80 mm Pin Length 1.50 mm PCB Dimension 70*70 mm Weight 23.4g ENVIRONMENTAL Operation Temperature -40°C to 85°C Humidity Non-condensing 65°C 95% RH Tested on square 70*70 mm ground-plane.
SPE-17-08-027/A/WY Page 4 of 13 3. Antenna Characteristics Return Loss
SPE-17-08-027/A/WY Page 5 of 13 Efficiency
SPE-17-08-027/A/WY Page 6 of 13 Peak Gain
SPE-17-08-027/A/WY Page 7 of 13 Average Gain
SPE-17-08-027/A/WY Page 8 of 13 4. Axial Ratio
SPE-17-08-027/A/WY Page 9 of 13 5. Antenna Radiation Pattern Measurement Setup The GPSF.36.7.A.30 antenna is tested in free-space on a 70 mm X 70 mm ground plane in an Anechoic Chamber. The test setup is shown below. Y X Z
SPE-17-08-027/A/WY Page 10 of 13 2D Radiation Pattern XY Plane XZ Plane YZ Plane Y Y X Z Z X
SPE-17-08-027/A/WY Page 11 of 13 3D Radiation Pattern GPS_L1_1575.42MHz GPS_L2_1227.6MHz
SPE-17-08-027/A/WY Page 12 of 13 6. Mechanical Drawing (Unit: mm)
SPE-17-08-027/A/WY Page 13 of 13 7. Packaging Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd.