GPF1001 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Cases: ITO-220AB molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Terminals: Leads solderable per MIL-STD- 202, Method 208 guaranteed /cuspopen Polarity: As marked /cuspopen High temperature soldering guaranteed: 2 6 0 ℃/ 0.25” (6.35mm) from case 10 s e c o n d s /cuspopen Mounting torque: 5 in – 1bs max. /cuspopen Weight: 2.24 grams ITO-220AB Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol GPF 1001 GPF 1002 GPF 1003 GPF 1004 GPF 1005 GPF 1006 GPF 1007 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC = 100℃ I(AV) 10.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 125 A Maximum Instantaneous Forward Voltage @5.0A VF 1.1 V Maximum DC Reverse Current @ TC=25℃ at Rated DC Blocking Voltage IR 5.0 uA Typical Junction Capacitance ( Note 1) Cj 30 pF Typical Thermal Resistance (Note 2) RθJC 5.0 ℃/W Operating and Storage Temperature Range TJ,TSTG - 65 to + 150 ℃ Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate
- 553 - FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 125 100 150 175 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 0.4 0.2 100 200 400 FORWARD VOLTAGE. (V) FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 1400.1 0.4 0.2 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=25 C0 Tj=125 C0 FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 0.5 1 4 10 40 100 1000 400 100 120 REVERSE VOLTAGE. (V) Tj=25 C0 f=10 MHz Vsig 50Mvp-p FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 CASE TEMPERATURE. ( C) o Single Phase Half Wave 60Hz Resistive of Inductive Load RATINGS AND CHARACTERISTIC CURVES (GPF1001 THR GPF1007)U Tj=25 C Pulse Width=300 s 1% Duty Cycle o