GP10E

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 1 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging Information Notes (1) Formerly sold by Vishay Telefunken® (Telefunken® is a registered trademark of Electro Holding GmbH).

• “P” and bold letter denote s preferred package code.
• A “T” suffix added to the packaging codes for SMA, SMB and SMC products indicates that the patented folded-frame construction is used. This does not apply to TR and TR3 codes or TRANSZORB® TVS in SMA and SMB. PACKAGING ORDERING CODE ANTI-STATIC PACKAGE CODE PREFERRED PACKAGE CODE PACKAGING DESCRIPTION

51 Bulk

52, 52T P DO-214AA (SMB)/DO-215AA (SMBG), 12 mm tape, 7" diameter plastic reel 2D P DO-218AB (SM5-8A), 24 mm tape, 13" diameter plastic reel, anode towards sprocket hole 2E DO-218AB (SM5-8A), 24 mm tape, 13" diameter plastic reel, cathode towards sprocket hole 2M Tube packaging for 5KP/6KA type lead formed components 2N DO-218AB, 24 mm tape, 13 "diameter plastic reel with dry packaging, anode towards sprocket hole 53 26 mm horizontal taping and ammo box packaging 54 P 52.4 mm horizontal tape , 13" diameter paper reel 5A, 5AT P DO-214AC (SMA), 12 mm ta pe, 13" diameter plastic reel 5B, 5BT P DO-214AA (SMB)/DO-215AA (SMBG), 12 mm tape, 13" diameter plastic reel 5CA P DO-214BA (GF1), 12 mm tape , 13" diameter plastic reel 57, 57T P DO-214AB (SMC)/DO-215A B (SMCG), 16 mm tape, 7" diameter plastic reel 6A P DO-221AC (SlimSMA), 12 mm tape, 7"diameter plastic reel 6B P DO-221AC (SlimSMA), 12 mm ta pe, 13"diameter plastic reel 9A, 9AT P DO-214AB (SMC)/DO- 215AB (SMCG), 16 mm tape, 13" diameter plastic reel 61, 61T P DO-214AC (SMA), 12 mm tape, 7" diameter plastic reel 67A P DO-214BA (GF1), 12 mm tape, 7" diameter plastic reel

72 P Bulk pack for bridge and special axial-leaded formed devices

73 52.4 mm horizontal tape and ammo box packaging

77 P DFS bridge, 16 mm tape, 13" diameter paper reel

80 P TO-269AA (MB-S) bridge, 12 mm ta pe, 13" diameter paper reel

81 P TO-263AB 24 mm tape, 13" diameter reinforced hub plastic reel

8A P SMPD, 24 mm tape, 13" diameter plastic reel 8W P TO-263AB (wire bond) 24 mm tape, 13" diameter reinforced hub plastic reel

83 P DO-213AA (GL34) 8 mm tape, 13" diameter plastic reel

84A P DO-220AA (SMP) 12 mm tape, 7" diameter plastic reel 85A P DO-220AA (SMP) 12 mm tape, 13" diameter plastic reel 86A P TO-277A (SMPC), 12 mm tape , 7" diameter plastic reel 87A P TO-277A (SMPC), 12 mm tape , 13" diameter plastic reel

38 Lead forming bulk packaging in anti-static bags

89A P MicroSMP, 8 mm tape, 7" diameter plastic reel

90 Euroform, reel, cathode first off reel, lead coated

91 Euroform, ammo pack, cathode first out of ammo pack, lead coated

92 Euroform, reel, cathode last off reel, lead coated

93 Euroform, ammo pack, cathode last out of ammo pack, lead coated

45 P Anti-static tube packaging for Bridge and Power Pack

4W P Anti-static tube packaging for wire bond TO-220, ITO-220, TO-262 and TO-263

96 P DO-213AB (GL41), 12 mm tape, 7" diameter plastic reel

97 P DO-213AB (GL41), 12 mm tape, 13" diameter plastic reel

98 P DO-213AA (GL34), 8 mm tape, 7" diameter plastic reel

100 MPG06 pseudo radial tape, cath ode first out of ammo pack

H P Tape in 7" diameter plastic reel I P Tape in 13" diameter plastic reel TR P DO-214AC (SMA), 12 mm tape, 7" diameter plastic reel (1) TR3 P DO-214AC (SMA), 12 mm tape, 13" diameter plastic reel (1)

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 2 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BULK PACKAGING CASE TYPES PREFERRED PACKAGE CODE PACKAGING BOX SIZE QUANTITY INCHES cm EA. DF-M, DF-S, DFL-S 45 Anti-static plasti c tubes 17.4 length 44.1 length 50 GSIB-3S 45 Anti-static plastic tu bes 25.1 length 63.9 length 20 GSIB-5S, PB 45 Anti-static plastic tubes 24.2 length 61.5 length 20 GBU, BU 45 Anti-static plastic tu bes 18.5 length 47 length 20 GBL 45 Anti-static plastic tube s 17.5 length 44.5 length 20 KBPM 45 Anti-static plastic tu bes 18.5 length 47 length 30 TO-220AB/AC, ITO-220AC/AB, TO-262AA 45, 4W Anti-sta tic plastic tubes 21.0 length 53.7 length 50 TO-247AD 45 Anti-static plastic tu bes 20.0 length 50.8 length 30 TO-269AA (MB-S) 45 Anti-static plas tic tubes 20.3 x 0.41 51.5 x 1.04 100 WOG, 2WOG 51 Plastic bags - - 100

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 3 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AXIAL-LEADED TAPE AND REEL PACKAGING All axial-leaded devices are packed in accordance with EIA standard RS-296-E. The diagrams given below refer to these specifications. Fig. 1 Fig. 2 TABLE 1 - AMMO PACK PACKAGING PACKAGING AVAILABLE PRODUCT OUTLINES PREFERRED PACKAGE CODE DIMENSION A DIMENSION B DIMENSION C QUANTITY BOX 26 mm horizontal tape, ammo pack DO-204AL (DO-41), MPG06 DO-204AC P300 9.7" (247 mm) 1.7" (44 mm) 3.7" (95 mm) 3.0K 1.5K 0.75K 52 mm horizontal tape, ammo pack DO-204AL, MPG06 DO-204AC DO201AD, GP20 P600 10.0" (255 mm) 3.15" (80 mm) 4.53" (115 mm) 3.0K 2.0K 1.0K 0.3K Radial (avisert, panasert, euroform) vertical tape GP10-E, RGP10-E, GP10-E, RGP10-E 91, 93 13.4" (340 mm) 1.8" (47 mm) 7.9" (200 mm) 2.0K 2.5K 2.0K Pseudo/radial tape, ammo pack MPG06 100 13.4" (340 mm) 1.8" (47 mm) 7.9" (200 mm) 2.0K A C B Inspection Hole (Both Sides) Ammo Pack can be Opened on Either Side, Depending on Desired Device Polarity Component Pitch A 2, 3 Inside Tape Spacing B 2, 3 Lead to Lead Eccentricity |D1 - D2| - Lead Extension K - Lead Bending E 2 Cumulative Pitch P 3 Exposed Adhesive S - Tape Width T - All polarized components shall be oriented in the same direction Description Symbol E D1 D2 A P K S B W 0.8 (0.031) Max. Dimensions A, M, K, P , S and T apply to both sides Dimensions in millimeters (inches) E T6.0 ± 0.4 (0.236 ± 0.0157) The “C” dimension of Fig. 2 is between flanges of the component reel and shall be 1.5 mm (0.059") to 8.00 mm (0.315") greater than the overall taped component width “W” (Fig. 1). Where “W” dimension is 68.2 mm (2.68") max. 38.1 (1.50) Dia. 14.3 (0.56) Dia. D Dia. (Table 2) Kraft Paper 91.9 (3.62) Dia. 50.8 (2.00) Dia. Cathode Lead Colored Tape C Anode Lead White Tape

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 4 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AXIAL-LEADED TAPE AND REEL PACKAGING Note

• Package codes, 61/5A, 52/5B are matrix-frame constructions for T RANSZORB® TVS in SMA and SMB only. TABLE 2 - REEL AND AMMO PACK TAPING SPECIFICATIONS COMPONENT CASE TYPE PREFERRED PACKAGE CODE UNITS PER REEL COMPONENT PITCH “A” Fig. 1 INSIDE TAPE SPACING “B” Fig. 1 REEL DIMENSION “D” Fig. 2 LEAD BENDING “E” Fig. 1 EA. INCHES mm INCHES mm INCHES mm INCHES mm DFS Surface Mount 77 1500 Fig. 13 - - 13.0 330 Fig. 13 - DO-214BA (GF1) 67A/5CA 1500/6500 - - 7.0/13.0 178/330 Fig. 13 - DO-213AA (GL34) 98/83 2500/9000 - - 7.0/13.0 178/330 Fig. 13 - DO-213AB (GL41) 96/97 1500/5000 - - 7.0/13.0 178/330 Fig. 13 - DO-220AA (SMP) 84A/85A 3000/10 000 Fig. 13 SMPD 8A 2000 - - 13.0 330 Fig. 13 - MicroSMP 89A 4500 - - 7.0 178 Fig. 13 - TO-277A (SMPC) 86A/87A 1500/6500 - - 7.0/13.0 178/330 Fig. 13 - DO-214AC (SMA) 61, 61T, TR/5A, 5AT, TR3 1800/7500 - - 7.0/13.0 178/330 Fig. 13 - DO-214AA (SMB)/ DO-215AA (SMBG) 52, 52T/5B, 5BT 750/3200 - - 7.0/13.0 178/330 Fig. 13 - DO-214AB (SMC)/ DO-215AB (SMCG) 57T/9AT 850/3500 - - 7.0/13.0 178/330 Fig. 13 - DO-218AB 2D 750 - - 13.0 330 Fig. 13 - TO-263AB 81, 8W 800 - - 13.0 330 Fig. 13 - TO-269AA (MB-S) 80 3000 - - 13.0 330 Fig. 13 - DO-221AC (SlimSMA) 6A/6B 3500/14 000 - - 7.0/13.0 178/330 Fig. 13 - TABLE 3 - COMPONENT AND INSIDE HORIZONTAL TAPE SPACING COMPONENT BODY DIAMETER COMPONENTS SPACING A (LEAD TO LEAD) INSIDE TAPE SPACING "B" CUMULATIVE PITCH TOLERANCE 0 mm to 5 mm (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 26 mm + 1.5 mm/- 0.0 mm Not to exceed 1.5 mm (0.059") over 6 consecutive components 0 mm to 5 mm (0.0" to 0.197") 5.0 mm ± 0.5 mm (0.197" ± 0.020") 52.4 mm + 1.5 mm/- 0.4 mm 5.01 mm to 10 mm (0.197" to 0.394") 10 mm ± 0.5 mm (0.394" ± 0.020") 52.4 mm + 1.5 mm/- 0.4 mm

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 5 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters (inches) Fig. 3 - Euroform Fig. 4 - Panasert Available for GP10 Products only Utilizing 0.65 mm (0.025") Diameter Leads for Euroform tape by adding suffix “E” (GP10GE, 1N4004GPE). Lead coating is standard. Tape 5.68 (0.224) 4.68 (0.184) (Center to Center) 20.5 18.5 (0.807) (0.728) 11.0 MAX. (0.433) 4.55 (0.179) 3.15 (0.124) (Center to Center) 1.0 MAX. (2) (0.40) (Center to Center) 6.5 MAX. (0.256) 16.5 (0.650) 15.5 (0.610) 4.3 (0.169) 3.7 (0.146) DIA. 2.5 MIN. (0.098) 12.0 MAX. (0.472) 7.35 (0.29) 5.35 (0.21) 0.6 MAX. (0.024) 9.75 (0.384) 8.50 (0.335) 19.0 (0.748) 17.5 (0.689) 13.5 (0.531) 12.5 (0.492) User Direction Feed 32.0 (1.26) 23.0 (0.905) 2.72 (0.107) 2.03 (0.080) Body DIA. 0.65 (0.0256) 0.55 (0.022) Lead DIA. ± 1.0 (2) (± 0.039) 0.6 (0.025) 0.4 (0.016) 13.0 (0.512) 12.4 (0.488) 12.7 (0.50) (Nominal) A (1) B (1) Note: (1) Measurement difference between leads, A and B = 0.4 (0.016) MAX. (2) Component Alignment Tape 19.0 (0.748) 17.5 (0.689) 9.75 (0.384) 8.50 (0.335) User Direction Feed 16.0 MIN. (0.630) 32.0 (1.26) 23.0 (0.905) 5.5 MIN. (0.217) (Center to Center) 6.5 MAX. (0.256) 4.3 (0.169) 3.7 (0.146) DIA. 5.68 (0.224) 4.68 (0.184) (Center to Center) 16.5 (0.650) 15.5 (0.610) 1.0 MAX. (1) (0.40) 7.0 MIN. (0.276) 1.3 MIN. (0.059) 2.72 (0.107) 2.03 (0.080) Body DIA. 0.86 (0.034) 0.55 (0.022) Lead DIA. ± 1.0 (1) (± 0.039) 0.6 (0.025) 0.4 (0.016) 13.0 (0.512) 12.4 (0.488) 11.0 MAX. (0.433) 4.55 (0.179) 3.15 (0.124) (Center to Center) 12.7 (0.50) (Nominal) Note: (1) Component Alignment

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 6 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters (inches) Fig. 5 - Avisert Fig. 6 - Pseudo Radial Note: (1) Component Alignment Available only for GP10 style products utilizing 0.65 mm (0.025") or 0.76 mm (0.030") diameter leads for Panasert and Avisert tape. Lead coating is available on GP10 products only. User Direction Feed13.0 (0.512) 12.4 (0.488) 6.5 MAX. (0.256) 5.68 (0.224) 4.68 (0.184) (Center to Center) (Center to Center) 1.0 MAX. (1) (0.40) 16.5 (0.650) 15.5 (0.610) 4.55 (0.179) 3.15 (0.124) (Center to Center) 4.3 (0.169) 3.7 (0.146) 2.72 (0.107) 2.03 (0.080) Body DIA. 0.86 (0.034) 0.55 (0.022) Lead DIA. ± 1.0 (1) (± 0.039) 3.0 MAX. (0.118) 0.6 (0.025) 0.4 (0.016) 16.0 MIN. (0.630) 32.0 (1.26) 23.0 (0.905) 5.5 MIN. (0.217) Tape 19.0 (0.748) 17.5 (0.689) 9.75 (0.384) 8.50 (0.335) 11.0 MAX. (0.433) 12.7 (0.50) (Nominal) Standard Polarity Cathode Oriented Away from Sprocket Holes (Optional Polarity Cathode Oriented Toward Sprocket Holes) 16.0 (0.63) MIN. 2.0 (0.079) MAX. 11.0 (4.33) MAX. 13.0 (0.51) 12.4 (0.49) 4.3 (0.169) 3.7 (0.146) DIA. 12.5 (0.492) MIN. Tape 19.0 (0.748) 17.5 (0.689) 9.75 (0.384) 8.50 (0.335) ± 1.0 (1) (± 0.039) 1.0 (0.039) MAX. 0.6 (0.025) 0.4 (0.016) Available only for MPG06 Product in Ammo Pack in Accordance with EIA Standard RS-468-A Utilizing User Direction Feed 0.66 (0.026) 0.55 (0.022) Lead DIA. 2.54 (0.01) 2.29 (0.090) Body DIA.3.2 (0.125) 2.9 (0.115) 3.06 (0.118) MAX. 5.68 (0.224) 4.68 (0.184) 4.51 (0.178) 3.11 (0.122) (Center to Center) 12.7 (0.50) (Nominal) 1.0 MAX. (1) (0.40) Note: (1) Component Alignment

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 7 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RADIAL TAPE PACKAGING Fig. 7 and Fig. 8 - Reel and Ammo Box Packaging Fig. 9 - Reel Dimensions Notes

• “C” dimension between the reel flanges shal l be governed by the overall width of the taped components and shall be 1.5 mm (0. 057") to 8.0 mm (0.315") greater than the overall width
• All leaded devices are pa ckaged in accordance with EIA standard RS-468-A specification and are available on reel or in fan fold box (ammo pack)
• All dimensions are in millimeters and (inches). The above packaging is only available from Taiwan. PKG90 PKG92 PKG91 PKG93 PREFERRED PACKAGE CODE EUROFORM PKG90, PKG91, PKG92, PKG93 Core DIA. 34.9 to 102 (1.37 to 4.02) “C” Arbor Hole DIA. 30 ± 5 ID (1.181 ± 0.197)

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 8 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SURFACE MOUNT TAPE AND REEL PACKAGING Fig. 10 Fig. 11 Fig. 12 Component Cavity Embossed Carrier Tape Top Cover Tape Thickness: 0.10 mm (0.004") Max. R Ref. Bending Radius Tape with Components shall Pass Around Bending Radius without Damage, for Reels with Hub Diameters Approaching Minimum Dimension B N A T D C G DIMENSIONS in millimeters (inches) TAPE SIZE A MAX. B MIN. C D MIN. N MIN. G MAX. T MAX.

www.vishay.com Vishay General Semiconductor Revision: 01-Feb-13 9 Document Number: 88869 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SURFACE MOUNT TAPE AND REEL PACKAGING Fig. 13 Notes (1) A0, B0, and K0 are determined by the maximum dimensions of the component size. The clearance between the component and the cavity (2) All surface mount components are packed in accordance with EIA standard 481-C 8 mm, 12 mm, 16 mm, AND 24 mm EMBOSSED TAPE in millimeters (inches) TAPE SIZE D 0 E1 P0 P2 A0, B0, K0 S1 MIN. T MAX. T 1 MAX. 8 mm, 12 mm 1.5 ± 0.1 (0.059 ± 0.004) 1.75 ± 0.1 (0.069 ± 0.004) 4.0 ± 0.1 (0.157 ± 0.004) 2.0 ± 0.05 (0.024) 0.600 (0.024) 0.1 (0.004)16 mm, 24 mm 2.0 ± 0.1 (0.79 ± 0.004) DIMENSIONS in millimeters (inches) CASE TYPE TAPE DO-213AA (GL34) 8 (0.315) 4.2 (0.165) 1.0 (0.39) 6.25 (0.246) 3.5 ± 0.05 (0.138 ± 0.002) 4.0 ± 0.10 (0.57 ± 0.004) (0.984) 2.4 (0.094) 8.0 ± 0.30 (0.315 ± 0.012)MicroSMP 3.28 (0.129) 6.05 (0.238) 1.919 (0.076) DO-213AB (GL41) (0.472) 8.2 (0.323) 1.5 (0.059) 10.25 (0.404) 5.5 ± 0.05 (0.217 ± 0.002) (1.181) 4.5 (0.177) 12.0 ± 0.30 (0.472 ± 0.012) DO-214BA (GF1) 3.25 (0.128) DO-214AC(SMA) 2.64 (0.104) DO-220AA (SMP) 1.84 (0.072) TO-277A (SMPC) 7.0 (2.76) 8.0 ± 0.10 (0.315 ± 0.004) 1.43 (0.056) DO-214AA (SMB)/ DO-215AA (SMBG) 8.2 (0.323) 2.77 (0.109) DO-214AB (SMC)/ DO-215AB (SMCG) 16 (0.630) 12.1 (0.476) 14.25 (0.561) 7.5 ± 0.05 (0.295 ± 0.002) 2.64 (0.104) 16.0 ± 0.2 (0.472 ± 0.004) 3.91 (0.154) TO-263AB DO-218AB 24 (0.945) 20.1 (0.791) 22.25 (0.876) 11.5 ± 0.1 (0.453 ± 0.004) 16.0 ± 0.10 (0.630 ± 0.004) 5.31 (0.209) 24.0 ± 0.3 (0.059) 12.0 ± 0.10 (0.472 ± 0.004) 2.35 (0.093) DO-221AC (SlimSMA) (0.472) 6.2 (0.244) 10.25 (0.404) 5.5 ± 0.05 (0.217 ± 0.002) 4.0 ± 0.10 (0.157 ± 0.001) 1.53 (0.060) 12.0 ± 0.3 (0.472 ± 0.012) Notes (1) For machine reference only, including draft and radii concentric around B 0 (2) See note 1 and table T B1 (1) F E W P A0 (2) D D1 for components 2.0 mm x 1.2 mm and larger Top Cover Tape De-Reeling Direction T T 10 P0itches Cumulative Tolerance on Tape ± 0.2 Rectifiers Polarization DFS and MBS Polarization DO-218AB/2D TVS Polarization GL41, SMA, SMB, SMC, SMP , MicroSMP , SMPC, SlimSMA, DO-218AB/2E