GP10A TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen High temperature metallurg ically bonded construction /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-O /cuspopen Glass passivated cavity-free junction /cuspopen Capable of meeting environmental standards of MIL-S-19500 /cuspopen 1.0 ampere operation at T A=75oC and 55oC with no thermal runaway /cuspopen Typical I R less than 0.1 uA /cuspopen High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data /cuspopen Case: JEDEC DO-41 molded plastic over glass body /cuspopen Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 /cuspopen Polarity: Color band denotes cathode end /cuspopen Mounting position: Any /cuspopen Weight: 0.012 ounce, 0.3 gram DO-41 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol GP 10A GP 10B GP 10D GP 10G GP 10J GP 10K GP 10M Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length (See Fig. 1) I(AV) 1.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 30 A Maximum Instantaneous Forward Voltage @1.0A VF 1.1 1.2 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 uA uA Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=75℃ HTIR 30 uA Typical Junction Capacitance ( Note 1 ) Cj 10 pF Typical Thermal Resistance (Note 2) RθJA 65 ℃/W Operating and Storage Temperature Range TJ,TSTG - 65 to + 175 ℃ Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 567 - RATINGS AND CHARACTERISTIC CURVES (GP10A THRU GP10M) FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 11 0 100 NUMBER OF CYCLES AT 60Hz Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 0.1 0.01 0.001 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=25 C0 Tj=125 C0 Tj=75 C0 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 20 40 60 100 160 180 14012080 0.4 0.2 0.6 0.8 1.0 AMBIENT TEMPERATURE. ( C) o SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5m/m) LEAD LENGTH FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 0.4 4 101 40 100 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p GP10K-GP10M GP10A-GP10J