GP10A GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A4 www.gulfsemi.com GP10A THRU GP10M SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.0A FEATURE DO-41\\DO-204AL High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350 °C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55 °C with no thermal run away Typical Ir<0.1 µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL GP 10A GP 10B GP 10D GP 10G GP 10J GP 10K GP 10M units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 V Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 V Maximum DC blocking Voltage Vdc 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =75 If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30.0 A Maximum Instantaneous Forward Voltage at 1.0A Vf 1.1 1.2 V Maximum full load reverse current full cycle Average at 75 Ir(av) 30.0 µA Maximum DC Reverse Current Ta =25 °C at rated DC blocking voltage Ta =125 °C Ir 5.0 50.0 µA µA Typical Reverse Recovery Time (Note 1) Trr 2.0 µS Typical Junction Capacitance (Note 2) Cj 8.0 7.0 PF Typical Thermal Resistance (Note 3) R(ja) 55.0 °C /W Storage and Operating Junction Temperature Tstg, Tj -65 to + 175 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
RATINGS AND CHARACTERISTIC CURVES GP10A THRU GP10M 1 Rev.A4 www.gulfsemi.com