GP10 FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
n HIGH TEMPERATURE METALLURGI- CALLY BONDED CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION Mechanical Dimensions Electrical Characteristics @ 25oC. Maximum Ratings Peak Repetitive Reverse Voltage...VRRM RMS Reverse Voltage...VR(rms) DC Blocking Voltage...VDC GP10A . . . 10M Series Average Forward Rectified Current...IF(av) Current 3/8" Lead Length @ TA = 75°C Non-Repetitive Peak Forward Surge Current...IFSM ½ Sine Wave Superimposed on Rated Load Forward Voltage @ 1.0A...VF Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 75°C DC Reverse Current...IR @ Rated DC Blocking Voltage TA = 75°C TA = 125°C Typical Junction Capacitance...CJ (Note 1) Typical Thermal Resistance...RθJA (Note 2) Typical Reverse Recovery Time...tRR (Note 3) Operating & Storage Temperature Range...TJ, TSTRG Page 6-6 Data Sheet
1.0 Amp MEGARECTIFIERS
1.1 Volts Volts Volts Units GP10A . . . 10M Series Amps Amps Volts µAmps µAmps µAmps pF °C / W µS 8.0 n 1.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n TYPICAL IR < 0.1 µAmp .205 .160 1.00 Min. .031 typ. .080 .107 JEDEC D0-41
1.0 MEGARECTIFIERS
GP10A . . . 10M Series Page 6-7 Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted. Forward Current Derating Curve TA = Ambient Temperature (°°°°°C) pF Typical Reverse Characteristics Non-Repetitive Peak Forward Surge Current Amps Percent of Rated Peak Voltage Typical Instantaneous Forward Characteristics Volts µµµµµAmps Typical Junction Capacitance Reverse Voltage (Volts) Number of Cycles @ 60 HZ Amps Amps 0.375″ ″ ″ ″ ″ (9.5mm) LEAD LENGTH RESISTIVE OR INDUCTIVE LOAD TJ = 75°°°°°C 8.3 mS Single Half Sine Wave (Jedec Method) TJ = 25°°°°°C f = 1.0 MHZ VSIG = 50mVp-p TJ = 25°°°°°C Pulse Width = 300µµµµµS 1% Duty Cycle TJ = 125°°°°°C TJ = 75°°°°°C TJ = 25°°°°°C