DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • UL® Listed, Std. 248-14, Guide JDYX, File E19180
  • CSA® Certified, C22.2 No. 248.14, Class 1422-01, File 53787
  • CE Fuse holder HLR
  • UL Recognized, 12A, 300 Vac, Guide IZLT2, File E14853
  • CSA Certified, 12A, 300 Vac, Class 6225-01, File 47235
  • CE HLR-2 and HRL-2L
  • UL Recognized, 15A, 300 Vac, Guide IZLT2, File E14853
  • CSA Certified, 15A, 300 Vac, Class 6225-01, File 47235
  • CE GMF and GRF(fuse) HLR (fuse holder) Non-rejecting, time- delay fuse and in-line fuse holders
  • HLR carrier comes with 6” of #18 red insulated solid copper wire attached to the line side
  • Customer inserts a #18 insulated solid copper wire into load side receptacle
  • Order part number HLR-2 to obtain 6” of #18 black insulated solid copper wire pre-installed in a load side receptacle
  • Order part number HLR-2L to obtain 6” of #18 black insulated solid copper wire packaged loose (un-installed)
  • An alternative to the HLR fuseholder is the A fuseholder. The A fuseholder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class 6225-01, File 47235
  • Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps)
  • Units can be panel mounted with a separate steel clip. For the knockout hole (see above), choose #BK/A-104. For the keyhole punch type hole, choose #6374 for panels 0.043” to 0.062” thick, or #4909 for panels 0.030” to 0.042” thick
  • Do not put tension on line (rear) terminal of fuseholder Catalog symbol: GMF, GRF (fuse) HLR (fuse holder) Ampere Rating: GMF 3/10 - 6 1/4 A, GRF 7 - 10 A Voltage Rating: 300 Volts AC or less Interrupting Rating: 10,000 A Agency information Fuse GMF, GRF HLR Fuse Holder Fuse Holder GMF-3/10 HLR GMF-3 HLR GMF-1/2 HLR GMF-3 2/10 HLR GMF-6/10 HLR GMF-4 HLR GMF-8/10 HLR GMF-5 HLR GMF-1 HLR GMF-6 1/4 HLR GMF-1 1/4 HLR GRF-7 HLR GMF-1 6/10 HLR GRF-8 HLR GMF-2 HLR GRF-10 HLR GMF-2 1/2 HLR GMF-10 HLR GMF-2 8/10 HLR Catalog numbers

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 2031 SB02233 August 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. GMF and GRF(fuse) HLR (fuse holder) Non-rejecting, time-delay fuse and in-line fuse holdersTechnical Data 2031 Effective August 2017 Time in seconds 0.1 0.3 0.5 1.6 3.2 100 200 Time-current curves–average melt Amp rating100 0.01 RMS symmetrical current in amps Dimensions - in (mm): Time in seconds 0.1 100 200 Time-current curves–average melt Amp 78 rating100 0.1 0.01 RMS symmetrical current in amps 0.63" (15.9mm) Fuse 0.720" (18.29mm) CL0.850" (21.59mm) 0.850" (21.59mm) 2.250" (57.15mm) 0.740" (18.80mm) 0.870" (22.10mm) 0.635" (16.13mm) 0.255" (6.48mm) 0.410" (10.41mm) Keyhole punchKnockout hole Line lead Load lead Fuse and carrier Mounting hole