GM339 GAMMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Single- supply Range: ±1.0V to ±18V Wide supply voltage range: ±2.0V to ±36V Very low supply current drain (0.4 mA) - independent of supply voltage Low input biasing current: 25 nA Low input offset current: ±5 nA Maximum offset voltage: ±3 mV Input common-mode voltage range includes ground Differential input voltage range equal to the power supply voltage Low output saturation voltage: 250 mV at 4 mA Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems
GM339V1.00 Marking Information and Pin Configurations (Top View) SO14 and DIP14 A: Assembly / Test site code Y: Year WW: Week
Ordering Information
Ordering Number Package Shipping GM339D14T DIP-14 25 Units / Tube GM339S14T SO-14 50 Units / Tube GM339S14R SO-14 2,500 Units / Tape & Reel GM339 AYWW 1. OUT COMP 1 2. OUT COMP 2 3. VCC 4. COMP 2 IN- 5. COMP 2 IN+ 6. COMP 1 IN - 7. COMP 1 IN+ 14. OUT COMP 3 13. OUT COMP 4 12. GND 11. COMP4 IN+ 10. COMP4 IN- 9. COMP 3 IN+ 8. COMP 3 IN-
GM339V1.00 GM339 LOW POWER QUAD DIFFERENTIAL COMPARATOR Absolute Maximum Ratings PARAMETER RATINGS UNITS Supply Voltage ±18 or 36 V Input Current 50 mA Input Voltage -0.3 to +32 V Operating Temperature Range -40 to 125 ℃ Storage Temperature - 65 to 150 ℃ Lead Temperature (soldering 10 sec.) 260 ℃ Block Diagram VIN - VIN + VOUT VCC
GM339V1.00 Electrical Characteristics (VCC = 5V, at specified free-air temperature, unless otherwise specified) Parameter Symbol Condition Min Typ Max Unit TA = 25℃ ±2 ±5 Input offset Voltage VIO VCC = 5V to Max VIC = VICR min VO = 1.4V Full Range 9 mV TA = 25℃ ±5 ±50 Input Offest Current IIO VO = 1.4V Full Range ±150 nA TA = 25℃ -20 -250 Input Bias Current IIB VO =1.4V Full Range 400 nA TA = 25℃ 0 to VCC-1.5V Common-Mode Input Voltage Range VICR Full Range 0 to VCC-2.0V V TA = 25℃ 150 400 Low-Level output Voltage VOL IOL = 4mA, VID = 1V Full Range 700 mV Large-Signal Differential Voltage Amplification AVD VCC = 15V, VO = 1V to 11V RL = 15K to VCC TA = 25℃ 50 200 V/mV VOH = 5V, VID = 1V T A = 25℃ 0.1 50 nA High Level Output Current IOH VOH = 30V, VID = 1V Full Range 1 µA Low Level Output Current IOL VOH = 1.5V, VID = -1V T A = 25℃ 6 mA RL = ∞, VCC = 5V TA = 25℃ 0.8 1.0 Supply Current ICC RL = ∞, VCC = 30V Full Range 2.5 mA 100mV input step with 5mV overdrive 1.3 Response Time (Note 1) RL Connected to 5V through 5.1k. CL = 15pF TTL - level input step 0.3 µs All characteristics are measured under open loop conditions with zero common-mode input voltage unless otherwise specified. "MAX" VCC for testing purposes is 30V. Full range is 0°C to 70°C. The voltage at either input or common - mode should not be allowed to go negative by more than 0.3V. The upper end of the common - mode voltage range is VCC - 1.5V, but either or both inputs can go to 30V without damage. Note 1: CL includes probe and jig capacitance. The response time specified is the interval between the input step function and the instant when the output crosses 1.4V.
GM339V1.00 Package Outline Dimensions – SO 14 SEATING PLAN 0.335 - 0.344 (8.509 - 8.738) 0.228 - 0.244 (5.791 - 6.198) 0.014 - 0.0200.050 TYP. (3.810 - 3.988) 0.008 - 0.010 (0.,203 - 0.254) 0.150 - 0.157
8 Max
0.053 - 0.069 (1.346 - 1.753) TYP. 0.014 (0.356) Package Outline Dimensions – DIP 14 0.018 +/- 0.003 (0.457 +/- 0.076) 0.785 (19.939) 0.060 +/- 0.005 (1.524 +/- 0.127) MAX 0.098 (2.489) MAX BOTH ENDS 0.100 +/- 0.010 (2.540 +/- 0.254) 0.008 - 0.012 (0.203 - 0.305) MAX 0.220 - 0.310 (5.588 - 7.874) 0.200 (5.080) MAX 0.150 (3.810) MIN (7.366 - 8.128) 0.290 - 0.320
GM339V1.00 GM339 LOW POWER QUAD DIFFERENTIAL COMPARATOR Ordering Number GM 339 S14 R APM Gamma Micro Circuit Type Package Type S14: SO 14 D14: DIP 14 Shipping Type R: Taping & Reel T: Tube