GH002G MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.031/07/20 Snap-In Enclsoures Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications: Enclosure Material : ABS External Height - Imperial : 1.77" External Height - Metric : 45mm External Width - Imperial : 3.58" External Width - Metric : 91mm External Depth - Imperial : 3.11" External Depth - Metric : 79mm GH001G;GH001B Dimensions : Millimetres Features:
- Light grey and black colours are available for selection
- Snap-in design can be opened and closed easily without the tool
- Rubber of the cable entry can be cut by knife easily for the cable connection
- 4 PCS of internal bosses are available for pcb assembly
- Ideally use for indoor / outdoor telecommunication device Base Rubber Lid
Page <2> V1.031/07/20 Snap-In Enclsoures Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Dimensions : Millimetres GH002G;GH002B Base Rubber Description Cable Entry External Dimension (mm) Part Number Length Width Height Box, ABS, 45mm × 79mm × 91mm, GRY
1 Way
Box, ABS, 45mm × 79mm × 91mm, BLK GH001B Box, ABS, 69mm × 122mm × 91mm, GRY
2 Way 122 69
Box, ABS, 69mm × 122mm × 91mm, BLK GH002B Part Number Table Lid Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.