GF281 TOCOS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
/H1854628mm diameter, single-turn industrial panel controls /H18546Cermet film element /H18546Single and tandem units, single shaft /H18546Excellent environmental characteristics /H18546Linear taper /H18546Shaft lock available /H18546Metal shaft and bushing /H185466mm diameter shafts in slot, flat or round end styles /H18546Standard 15mm or 20mm shaft length /H18546Panel mount only /H18546Right angle ear-lug terminals /H18546Optional 6-turn GFV281 model available as special order GF281G GF281
TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com GF281 Single-Turn & GFV281 6-Turn (special order) Panel Mount, Single Unit, Single Shaft Right Angle Ear-Lug Terminals Unit: mm DimensionsGF281 Series GF281G Panel Mount, Ganged Tandem Unit, Single Shaft Right Angle Ear-Lug Terminals on Each Unit GF281L Panel Mount, Single Unit, Single Shaft with Shaft Lock Right Angle Ear-Lug Terminals Recommended Panel Mounting Holes Recommended Panel Mounting Holes Recommended Panel Mounting Holes
TOCOSAMERICA,INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales @tocos.com www.tocos.com Resistance ( Ω) 100 200 500 Resistance ( Ω) 1,000 2,000 5,000 Resistance ( Ω) 10,000 20,000 50,000 Resistance ( Ω) 100,000 200,000 500,000 Resistance ( Ω) 1,000,000 Code 101 201 501 Code 102 202 502 Code 103 203 503 Code 104 204 504 Code 105 Standard Nominal Total Resistance Values and Part Numbering Codes Standard Resistance Values and Part Numbering Codes Refer to Shaft End Styles Specifications and Hardware Specifications for details and availability. For additional information, refer to Guidelines and Precautions for Using Panel Controls. GF G281 103 KL S B15 Resistance Tolerance: K = /H1155510% (standard). Resistance Code: Expressed in ohms. A three digit code where the first two digits are significant figures, and the third digit indicates the number of zeros that follow these figures (i.e.,100 = 10Ω;1 0 1=1 00Ω;102 = 1,000Ω; 103 = 10,000Ω;105 = 1,000,000Ω). See table for standard resistance values. For Single Unit: Specify taper and resistance code as shown. For Ganged Tandem Unit: Specify a taper code and resistance code for each unit starting with the front unit followed by the rear unit. If both units have the same taper and resistance codes, add “X2” suffix per example below. Examples: B103A503 or if both units are the same: B103X2 Resistance Taper: B = Linear. Shaft End Style: S = Slotted. F = Flatted. R = Round. Standard Shaft Length: 15 = 15mm FMS. 20 = 20mm FMS. Up to 50mm shaft length available (special order). Shaft Lock: L = With Shaft Lock. Blank = Without Shaft Lock. Style: Blank = Panel Mount, Single Unit, Single Shaft, Right Angle Ear-Lug T erminals. G = Panel Mount, Ganged Tandem Unit, Single Shaft, Right Angle Ear-Lug T erminals on Each Unit. Size: 281 = 28mm Diameter. TOCOS Series Name: GF = Cermet Film Element. Part Numbering SystemGF281 Series NOTE: FMS = From Mounting Surface