GF1500 ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Gap Filler 1500 is a two-part, high performance, thermally conductive liquid gap filling material, which features superior slump resistance and high shear thinning characteristics for optimized consistency and control during dispensing.The mixed system will cure at room temperature and can be accelerated with the addition of heat. Unlike cured thermal pad materials, a liquid approach offers infinite thickness variations with little or no stress to the sensitive components during assembly. Gap Filler 1500 exhibits low level natural tack characteristics and is intended for use in applications where a strong structural bond is not required. As cured, Gap Filler 1500 provides a soft, thermally conductive, form-inplace elastomer that is ideal for fragile assemblies and filling unique and intricate air voids and gaps. Note: To build a part number, visit our website at www.bergquistcompany.com. Gap Filler 1500 (Two-Part) TYPICAL APPLICATIONS INCLUDE

  • Automotive electronics
  • Telecommunications
  • Computer and peripherals
  • Between any heat-generating semiconductor and a heat sink CONFIGURATIONS AVAILABLE
  • Supplied in cartridge and kit form
  • With or without glass beads PDS_GF_1500_0312 FEATURES AND BENEFITS
  • Thermal conductivity: 1.8 W/mK
  • Optimized shear thinning characteristics for ease of dispensing
  • Excellent slump resistance (stays in place)
  • Ultra-conforming with excellent wet-out for low stress interface applications
  • 100% solids – no cure by-products
  • Excellent low and high temperature mechanical and chemical stability PRODUCT DESCRIPTION Thermally Conductive Liquid Gap Filling Material March 2012 PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD Color / Part A Yellow Yellow Visual Color / Part B White White Visual Viscosity,High Shear (Pa-s)(1) 25 25 ASTM D5099 Density (g/cc) 2.7 2.7 ASTM D792 Mix Ratio 1:1 1:1 — Shelf Life @ 25°C (months) 6 6 — PROPERTY AS CURED Color Yellow Yellow Visual Hardness (Shore 00)(2) 50 50 ASTM D2240 Heat Capacity (J/g-K) 1.0 1.0 ASTM D1269 Continuous Use Temp (°F) / (°C) -76 to 392 -60 to 200 — ELECTRICAL AS CURED Dielectric Strength (V/mil) 400 400 ASTM D149 Dielectric Constant (1000 Hz) 6.4 6.4 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL AS CURED Thermal Conductivity (W/m-K) 1.8 1.8 ASTM D5470 CURE SCHEDULE SCHEDULE 1 SCHEDULE 2 -)rh 8( nim 084nim 06)3( C°52 @ efiL toP sruoh 5)4(C°52 @ eruC 3 days - nim 01)4( C°001 @ eruC 30 min - 1) Capillary viscosity,initial, 3000 sec-1.P art A and B measured separately 2) Thirty second delay value Shore 00 hardness scale. 3) Parallel Plate Rheometer - Working life as liquid. 4) Parallel Plate Rheometer - Estimated time to read 90% cure. TYPICAL PROPERTIES OF GAP FILLER 1500

For the most direct access to local sales and technical support visit: www.bergquistcompany.com Americas +1.800.347.4572 Europe +31.35.5380684 Asia +852.2690.9296 TDS Gap Filler 1500, March 2012 Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable, on whatever legal ground, Henkel’s liability will in no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S. the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of m e r c h a n t a b i l i t y o r fi t n e s s f o r a p a r t i c u l a r p u r p o s e , a r i s i n g f r o m s a l e o r u s e of Henkel Corporation’s products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Trademark usage Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office Reference 0.1