STGB14NC60KD_06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

STGF14NC60KD - STGP14NC60KD N-channel 14A - 600V - TO-220 - TO-220FP - D2PAK Short circuit rated PowerMESH™ IGBT General features ■ Low on-voltage drop (Vcesat) ■ Low Cres / Cies ratio ( no cross conduction susceptibility) ■ Switching losses include diode recovery energy ■ Very soft ultra fast recovery antiparallel diode ■ Short circuit withstand time 10µs

Description

Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the Power MESH™ IGBTs, with outstanding performances. The suffix “K” identifies a family optimized for high frequency motor control applications with short circuit withstand capability.

Applications

■ High frequency inverters ■ SMPS and PFC in both hard switch and resonant topologies ■ Motor drivers Internal schematic diagram Type V CES VCE(sat) (Max)@ 25°C IC @100°C STGB14NC60KD 600V <2.5V 14A STGF14NC60KD 600V <2.5V 7A STGP14NC60KD 600V <2.5V 14A TO-263 TO-220 TO-220FP Order codes Part number Marking Package Packaging STGB14NC60KD GB14NC60KD D²PAK Tape & reel STGF14NC60KD GF14NC60KD TO-220FP Tube STGP14NC60KD GP14NC60KD TO-220 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Calculated according to the iterative formula:
  2. Pulse width limited by max junction temperature.

Table 2. Thermal resistance

2 Electrical characteristics

Table 3. Static

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

Table 4. Dynamic

Table 5. Switching on/off (inductive load) Table 6. Switching energy (inductive load)

  1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in
  2. Turn-off losses include also the tail of the collector current.

Table 7. Collector-emitter diode

2.1 Electrical characteristics (curves)

Figure 1. Output characterisics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs Figure 5. Collector-emitter on voltage vs Figure 6. Normalized gate threshold vs

3 Test circuit

Figure 17. Test circuit for inductive load Figure 18. Gate charge test circuit Figure 19. Switching waveforms Figure 20. Diode recovery times waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

DIM. mm. inch A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 8 0.315 E 10 10.4 0.393 E1 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R0 . 4 0 . 0 1 5 V2 0º 4º D2PAK MECHANICAL DATA

STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Packaging mechanical data

5 Packaging mechanical data

  • on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

6 Revision history

Table 8. Revision history