GF14 MERCURY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Input Voltage ( VDD) 50.1 ~ 640.0 MHz Initial Freq. Accuracy ( at 25 °C ) To tune to the nomial frequency with Vc = 1.65V ± 0.15V
3.3 V ± 5 %
Output Logic High " 1 " 90% VDD ( min. ) Output Wave Form CMOS output Frequency Deviation Range Standard : ± 80 ppm ( min. ) Control Voltage Center / Control Voltage Range 1.65 VDC / 0.3 V to 3.0 V Output Logic Low " 0 " 10% VDD ( max. ) Output Load 15 pF - 50°C to 100°C Current Consumption Start - Up Time (Ts) 10 m sec. ( max.) ; 5 m sec.( typical ) BC For example : " C20 " ±20 ppm over -10°C to +70°C ; Industrial ( -40°C to +85°C ) DE " I20 " ± 20 ppm over -40°C to +85°C Frequency Stability (1) Codes Frequency Stability over ± 25 ppm If non-standard , please enter the Operating Temperature Range Outline Dimensions ( Unit : mm ) -128 100KHz desired stability after the " C " or " I " Mercury www .mercury-crystal.com -140 -150Phase Noise ( typical ) [ 156.250 MHz ] Offset 10 Hz 100 Hz 1K Hz dBc / Hz -62
10 KHz
F -92 -120 -132
1 MHz 10 MHz
Input Impedance 60 K Ω ( min.) Duty Cycle 50% ± 10% [ 50% ± 5% is also available ] Commercial ( -10°C to +70°C ) A ± 50 ppm ± 100 ppm Storage Temperature < 100 MHz : 30 mA ( max.) 100 ~ 320 MHz : 40 mA ( max.) Aging ± 3 ppm per year (max.) VCXO [ Voltage Controlled Crystal Oscillators ] GF14 series 3.3 V Dip type CMOS output 20.2 x 12.8 x 6.0 mm Phase Jitter < 1.0 ps [ 50.1 ~ 640.0 MHz ] Applications :
- Best performance among the three. Phase jitter is less than 0.5 ps. General Specifications Paramenters Electrical Spec.