GC5007 JHE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 21
Technical content
JEWEL HILL ELECTRONIC CO.,LTD. JEWEL HILL ELECTRONIC CO.,LTD. SPECIFICATIONS FOR LCD MODULE Module No. GC5007 Office Address: Rm. 518,5/F., 101 Shangbu Industrial District, HuaqiangNorthRoad, Shenzhen, China TEL : (86)-755-83362489 83617492 FAX: (86)-755-83286396 83365871 E-mail: sales@jewelhillelectronic.com jhlcd@21cn.com Website: www.jewelhillelectronic.com GC5007 VER: 2.0 - 0 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. TABLE OF CONTENTS GC5007 VER: 2.0 - 1 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. LCM Number System 33&% 05)&3$0-03 ('$0'5'5-$. /8*5)065$0/530--&3 ''45/ $$45/ %5'5 130%6$&5:1& -$%5:1& 55/ ))5/ 445/ -$%$0-03.0%& ::&--08(3&&/ ((3": ##-6& 005)&3 --&'5 33*()5 6611&3 %%08/ 553"/4.*44*7& 05)&3 10-"3*;&35:1& -$%%*41-":.0%& 1104*5*7& //&("5*7& --&% &&- $$$'- "".#&3 ##-6& 88)*5& ::&--08(3&&/ ''1$ 005)&3 11*/ ))&"54&"- ;;" $0//&$503 $8*5)$0/530--&3 05)&3 4*-,4$3&&/ (55"#-$. (($0(-$. (1-$%1"/&- ($$0-0345/ ($$0%8/5/07$8/9 GC5007 VER: 2.0 - 2 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 1. GENERAL DESCRIPTION The GC5007 is a 320(RGB) x 240 Dots LCD m odule. It has a C-STN panel com posed of 320 x 3 segments and 240 commons. The LCM can be easily accessed via parallel interface. 2. FEATURES Transmissive and Negative Display Mode 65Kcolor CSTN module Display Color Decided by the Controller BackGround Black(ReaaGreenaBlue Dots are OFF atate) Display Format 320x240 Dots Input Data 8 bit parallel data transfer Multiplexing Ratio 1/240 Duty Bias 1/17 Bias Viewing Direction 6 O’clock Driving IC IST3224TA0 Backlight CCFL(White) 3. MECHANICAL SPECIFICATION Item Specifications Unit Screen Size 5.7 inch Dimensional outline 158.5(W) x 109.0(H) x 8.5(T) mm Resolution 320(RGB) x 240 dots Vewing area 119.38(W) x 90.38(H) mm Active area 115.18(W) x 86.38 (H) mm Dots pitch 0.36 (W)×0.36(H) mm Dots size 0.345(W)×0.345(H) mm Approx. weight TBD g GC5007 VER: 2.0 - 3 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. GC5007 VER: 2.0 - 4 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 4. MECHANICAL DIMENSION GC5007 VER: 2.0 - 5 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 5. MAXIMUM RATINGS Item Symbol Min Max Unit Note VDD - Vss -0.3 6.0 V Supply voltage VLCD -0.3 40.0 V Input Voltage VIN -0.3 VDD+0.3 V Operating temperature TOPR -10 +60 Ċ Storage temperature TSTR -20 +70 Ċ Humidity --- --- 90 %RH 6. ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typ. Max. Unit Supply Voltage Logic VDD --- - 5.0 - V H level VIH 0.8VDD --- VDD Input Voltage L level VIL --- VSS --- 0.2VDD V Current Consumption IDD VDD=5V; Tamb=25Ċ; --- 1.5 2.0 mA LCD Driving Voltage VLCD Bias=1/17 VLCD=VEE-VSS --- 23.0 --- V GC5007 VER: 2.0 - 6 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 7. MODULE FUNCTION DESCRIPTION 7.1. PIN DESCRIPTION CON1: Pin No. Symbol Description
1 M Input of Signal to AC Electrify the LCD Driver Output
2 YD Scan Start Pulse
3 LP Display Data Latch Pulse Input
4 XCK Display Data Shift Colok Input
5 DISPOFF Display ON/OFF Selection
6 VDD Power Supply for Positive
7 VSS Power Supply for Ground
8 VEE LCD Driver Voltage Input
9 D7 Data Bit 7
10 D6 Data Bit 6
11 D5 Data Bit 5
12 D4 Data Bit 4
13 D3 Data Bit 3
14 D2 Data Bit 2
15 D1 Data Bit 1
16 D0 Data Bit 0
1 VFL1 Supply Voltage for CCFL
2 NC No Connect
3 VFL2 Supply Voltage for CCFL
GC5007 VER: 2.0 - 7 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD.
7.2 TIMING CHARACTERISTICS
GC5007 VER: 2.0 - 8 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. GC5007 VER: 2.0 - 9 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD.
7.3 APPLICATION EXAMPLES
BLOCK DIAGRAM GC5007 VER: 2.0 - 10 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 8. ELECTRO-OPTICAL CHARACTERISTICS GC5007 VER: 2.0 - 11 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. GC5007 VER: 2.0 - 12 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. GC5007 VER: 2.0 - 13 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 9. RELIABILITY 9.1. MTBF The LCD m odule shall be designed to m eet a minimum MTBF value of 50000 hours with norm al. (25°C in the room without sunlight) 9.2. TESTS NO. ITEM CONDITION CRITERION
1 High Temperature Operating
60Ċ 240Hrs Restore 4Hrs at 24Ċ
2 Low Temperature Operating
-10Ċ 240Hrs Restore 4Hrs at 24Ċ
3 High Temperature
70Ċ 240Hrs Restore 4Hrs at 24Ċ
4 Low Temperature
-20Ċ 240Hrs Restore 4Hrs at 24Ċ
5 High Temperature/
60Ċ ,90%RH ,240 Hrs Restore 4Hrs at 24Ċ
6 Temperature Cycling
-20Ċ(30Min )↔ 70Ċ(30Min)
10 CYCLES
Restore 4Hrs at 24Ċ
7 Vibration Test 10Hz ~ 150Hz ~ 10Hz
Swing: 0.75mm
8 Chock Test Half-Sine Ware
9 Atmospheric Pressure Test 25Kpa 16Hrs
Allowable. fIDD of LCM in Pre-and post-test should follow specification GC5007 VER: 2.0 - 14 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 10. PRECAUTIONS FOR USING LCD MODULES 10.1. HANDLING PRECAUTIONS (1) The display panel is made of glass. Do not subject it to a mechanical shock or impact by dropping it. (2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water. (3) Do not apply excessive force to the display surface or the adjoining areas since this m ay cause the color tone to vary. (4) The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. (5) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten a cloth with one of the following solvents: - Isopropyl alcohol - Ethyl alcohol (6) Solvents other than those above mentioned may damage the polarizer. Especially, do not use the following: - Water - Ketone - Aromatic solvents (7) Extra care to m inimize corrosion of the electr ode. W ater droplets, m oisture condensation or a current flow in a high-humidity environment accelerates corrosion of the electrode. (8) Install the LCD Module by using the m ounting holes. W hen mounting the LCD Module, m ake sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable. (9) Do not attempt to disassemble or process the LCD Module. (10) NC terminal should be open. Do not connect anything. (11) If the logic circuit power is off, do not apply the input signals. (12) To prevent destruction of the elem ents by sta tic electricity, be caref ul to m aintain an optim um work environment. - Be sure to ground the body when handling he LCD Module. - Tools required for assembling, such as soldering irons, must be properly grounded. -To reduce the am ount of static electricity generated, do not conduct assem bling and other work under dry conditions. GC5007 VER: 2.0 - 15 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. -The LCD Module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated. 10.2. STORAGE CONDITIONS When storing, avoid the LCD m odule to be exposed to direct sunlight of fluorescent lam ps. For stability, to keep it away form high tem perature and high hum idity environment (The best condition is : 23±5°C, 45±20%RH). ESD protection is necessary for long-term storage also. 10.3. OTHERS Liquid crystals solidify under low tem perature (bel ow the storage tem perature range) leading to defective orientation or the generation of air bubbl es (black or white). Air bubbles m ay also be generated if the module is subject to a low temperature. If the LCD Module have been operating for a long time showing the same display patterns the display patterns may remain on the screen as ghost im ages and a slight contrast irregularity m ay also appear. A normal operating status can be recovered by suspe nding use for som e time. It should be noted that this phenomenon does not adversely affect performance reliability. To minimize the perform ance degradation of th e LCD Module resulting from destruction caused by static electricity etc. exercise care to avoid holding the following sections when handling the modules. - Exposed area of the printed circuit board. - Terminal electrode sections. GC5007 VER: 2.0 - 16 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 11. Using LCD modules
11.1 LIQUID CRYSTAL DISPLAY MODULES
LCD is composed of glass and polarizer. Pay attention to the following items when handling. (1) Please keep the tem perature within specified ra nge for use and storage. Polarization degradation, bubble generation or polarizer peel-off may occur with high temperature and high humidity. (2) Do not touch, push or rub the exposed polarizers with anything harder than a HB pencil lead (glass, tweezers, etc). (3) N-hexane is recom mended for cleaning the adhe sives used to attach front/rear polarizers and reflectors m ade of organic substances, which will be dam aged by chem icals such as acetone, toluene, toluene, ethanol and isopropyl alcohol. (4) When the display surface becom es dusty, wipe gently with absorbent cotton or other soft m aterial like chamois soaked in petroleum ether. Do not scrub hard to avoid damaging the display surface. (5) Wipe off saliva or water drops im mediately, contact with water over a long period of tim e may cause deformation or color fading. (6) Avoid contacting oil and fats. (7) Condensation on the surface and contact with terminals due to cold will dam age, stain or polarizers. After products are tested at low tem perature they m ust be warm ed up in a container before coming is contacting with room temperature air. (8) Do not put or attach anything on the display area to avoid leaving marks on. (9) Do not touch the display with bare hands. This will stain the display area and degrade insulation between terminals (some cosmetics are determinate to the polarizers). (10)As glass is fragile, it tends to becom e or chipped during handling especially on the edges. Please avoid dropping or jarring.
11.2 INSTALLING LCD MODULE
Attend to the following items when installing the LCM. (1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell. (2) When assembling the LCM into other equipm ent, the spacer to the bit between the LCM and the fitting plate should have enough height to avoid cau sing stress to the m odule surface, refer to the individual specifications for measurements. The measurement tolerance should be ±0.1mm.
11.3 ELECTRO-STATIC DISCHARGE CONTROL
Since this m odule uses a CMOS LSI, the sam e car eful attention should be paid for electrostatic discharge as for an ordinary CMOS IC. GC5007 VER: 2.0 - 17 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. (1) Make certain that you are grounded when handing LCM. (2) Before removing LCM from its packing case or incorporating it into a set, be sure the m odule and your body have the same electric potential. (3) When soldering the term inal of LCM, m ake certain the AC power source for the soldering iron does not leak. (4) When using an electric screwdriver to a ttach LCM, the screwdriver should be of ground potentiality to minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor. (5) As far as possible, make the electric potential of your work clothes and that of the workbenches to the ground potential. (6) To reduce the generation of electro-static discharge, be careful that the air in the work is not too dried. A relative humidity of 50%-60% is recommended.
11.4 PRECAUTIONS FOR OPERATION
(1) Viewing angle varies with the change of liquid crystal driving voltage (Vo). Adjust Vo to show the best contrast. (2) Driving the LCD in the voltage above the limit will shorten its lifetime. (3) Response time is greatly delayed at temperature below the operating temperature range. However, this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range. (4) If the display area is pushed hard during operation, the display will become abnormal. However, it will return to normal if it is turned off and then on. (5) Condensation on term inals can cause an electroch emical reaction disrupting the term inal circuit. Therefore, this product m ust be used and stor ed within the specified condition of 23±5°C, 45±20%RH. (6) When turning the power on, input each signal after the positive/negative voltage becomes stable.
11.5 SAFETY
(1) It is recom mended to crush dam aged or unnece ssary LCDs into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. (2) If any liquid leaks out of a dam aged glass ce ll and com es in contact with the hands, wash off thoroughly with soap and water. GC5007 VER: 2.0 - 18 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. 12. REVISION HISTORY Version Revise record Date
1.0 Original version 05-07-20
2.0 Change specification format 05-11-21
GC5007 VER: 2.0 - 19 - Issue date: 2005/11/21
JEWEL HILL ELECTRONIC CO.,LTD. SAMPLE APPROVED REPORT (ဢಒಪֆ) SAMPLE MODEL NO. (ݼ )GC5007 SAMPLE SERIES NUMBER NO. (ݼ ) SAMPLE QUANTITY (ဢඔਈ) COLOR/TYPE (/ো) C-STN/NEGATIVE VIEWING DIRECTION (࢘ )6:00 DRIVING METHOD (ҕඔ) 1/240Duty, 1/17Bias LOGIC VOLTAGE (IC) 5.0V LCD VOP (LCD) 23.0V OPERATING TEMP. (؇ )¥ -10~60 STORAGE TEMP. (؇ )¥ -20~70 POLARIZER----FRONT (ோ) TRANSMISSIVE POLARIZER----BACK (ோ) TRANSMISSIVE CONTROLLER/DRIVER IC(॥ᇅ/IC) NONE/IST3024TA0 BACKLIGHT COLOR/TYPE (ჷো/) CCFL/WHITE DRAWING REV/NO./QUANTITY (ᆼϱЧ/ඔਈ) SPECIFICATION ( ඔ) REMARKSğ (Сᇿ) CUSTOMER’S APPROVAL (ಒಪ)ğ 1Ď FUNCTIONିĎğ O K N .G. 2Ď DRIVER CONDITIONĎğ O K N .G. 3Ď DISPLAY MODE čཁൕଆൔĎğ O K N .G. 4Ď VIEWING ANGLEĎğ O K N .G. 5Ď BACKLIGHTჷĎğ O K N .G. 6Ď DISPLAYING PATTERN Ďğ O K N .G. GC5007 VER: 2.0 - 20 - Issue date: 2005/11/21