GBPC FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Integrally molded heatsink provided very low thermal resistance for maximum heat dissipation.

  • Surge overload rartings from 300 amperes to 400 amperes.
  • Isolated voltage from case to lead over 2500 volts. Symbol Parameter Value Units IO Averag e Rectified Current GBPC 12 @ T A = 55°C GBPC 15 GBPC 25 GBPC 35 A A A A if(surge) P eak Forw ard S urge Current 8.3 m s single half-sine-w ave GBPC 12, 15, 25 Superimposed on rate d load (JEDEC method ) GBPC35 300 400 A A PD Total Device Dissipation Derate above 25°C 83.3 666 W m W /°C R θJL Ther m al Resistance, Junction to Lead 1.5 °C/W Tstg Storag e Tem perature R ange -55 to +150 °C TJ Operating Junction Temperature -55 to +150 °C GBPC GBPC-W Dimensions are in: inches (mm) 0.692(17.6) 0.612(15.5) 1.14(29.0) 1.12(28.5) 0.612(15.5) 0.692(17.6) 1.12(28.5) 1.14(29.0) 0.522(13.3) 0.602(15.3) 0.752(19.1) 0.672(17.1) 0.20(5.08) 0.22(5.59) D IA H O LE F O R #10 S C R E W 0.25(6.35) 0.432(10.97) 0.442(11.23) 0.85(21.5) 0.96(24.5) 0.432(10.97) M IN 0.038(0.97) 0.042(1.07) 0.752(19.1) 0.22(5.59) D IA H OLE F O R #10 S C R E W 1.12(28.5) 1.14(29.0) 0.490(12.4) 0.410(10.4) 1.14(29.0) 1.12(28.5) 0.672(17.1) 0.752(19.1) Suffix "W" Wire Lead Structure Suffix "M" Terminal Location Face to Face Discrete POWER & Signal Technologies

GBPC 12, 15, 25, 35 SERIES GBPC 12, 15, 25, 35 SERIES , Rev. A Glass Passivated Bridge Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) FORWARD CURRENT (A) º SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS GBPC35 GBPC25 GBPC12-GBPC15 Non-Repetitive Surge Current 12 5 1 0 2 0 5 0 1 0 0 100 200 400 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT (A) GBPC12-GBPC25 GBPC35 Forward Characteristics 0.1 100 200 FORWARD VOLTAGE (V) FORWARD CURRENT (A) Pulse Width = 300µs 2% Duty Cycle T = 25 C ºA GBPC12-GBPC15 GBPC25 GBPC35 Reverse Characteristics 0 2 04 06 08 0 1 0 0 1 2 0 1 4 0 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) REVERSE CURRENT ( A) µ T = 25 C ºA T = 125 C ºA Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device Units 005 01 02 04 06 08 10 Peak Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 125°C 5.0 500 µA µA Maximum Forward Voltage Drop, per bridge @ 6.0 A GBPC12 @ 7.5 A GBPC15 @ 12.5 A GBPC25 @ 17.5 A GBPC35 1.1 V I2t rating for fusing GBPC12,15,25 t < 8.3 ms GBPC35 375 660 A2Sec A2Sec Typical Junction Capacitance, per leg VR = 4.0V, GBPC12,15,25 f = 1.0 MHz GBPC35 180 200 pF pF

ACEx™ CoolFET™ CROSSVO LT™ E 2CMOS TM FACT™ FACT Quiet Series™ FAST ® FAS Tr™ G TO™ HiSeC™ The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPO RT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPRO VAL OF FAIRCHILD SEMICONDUC TOR CORPOR ATION. As used herein: ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT S TATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILIT Y, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.