GBJ8005 MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts GBJ8005 THRU GBJ810 CURRENT 8.0 Amperes

FEATURES

  • Plastic package has UL Flammability Glassification 94V-0
  • Glass passivated chip junctions
  • High case dielectric strength of 1500 VRMS
  • High surge current capability
  • High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length MECHANICAL DATA
  • Case: molded plastic body
  • Terminal: Plated leads solderable per MIL-STD-750 Method 2026
  • Mounting position: Any (Note 3)
  • Mounting Torque: 6 in – 1bs max.
  • Weight: 0.26 ounce, 7.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS GBJ 8005 GBJ 801 GBJ 802 GBJ 804 GBJ 806 GBJ 808 GBJ

810 UNIT

Maximum Reverse Peak Repetitive Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 100 Volts Maximum Average Forward Rectified Current, At TC=100℃ (Note 1) I(AV) 8.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 170 Amps Rating for Fusing (t＜8.3ms) I2t 166 A 2s Maximum Instantaneous Forward Voltage drop Per bridge element 4.0A VF 1.0 Volts TA=25℃ 5.0 Maximum DC Reverse Current at rated DC blocking voltage per element TA=125℃ IR 500 μA Typical Junction Capacitance, per let (Note 2) CJ 211.0 94.0 pF Typical Thermal Resistance (Note 4) RJA 3.5 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat Transfer with #6 screws 2.7-3.1 3.4-3.8 4.4-4.8 3.0×45 0.9-1.1 2.0-2.4 2.5±0.2 29.7-30.3 O O GBJ 5.0 φ3.1-3.4 17.0-18.0 3.8-4.2 10.8-11.2 19.7-20.3 0.6-0.8

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000Volts GBJ8005 THRU GBJ810 CURRENT 8.0 Amperes 150 100 12080200 50 150100 200 250 10 1001 500 0.01 0.1 100 100806040200 100 0.1 0.01 100.010.1 1001 100 0.1 1000 100 1001 100.1 Heat-Sink Mounting,on 3.2×3.2×0.12"Thk (8.2×8.2×0.3cm)AL.Plate

60 Hz Resistive or Inductive Load

SPulse width=300μ JT =25℃ 1% Duty Cycle 600-1000V 50-400V 600-1000V 50-400V T =25℃J f=1.0MHz Vsig=50mVp-p T =25℃J T =125℃J T =150℃J T =150℃J 8.3ms Single Half Sine-Wave (JEDEC Method ) 4.0 2.0 6.0 8.0 JUNCTION CAPACITANCE, (pF) T, HEATING TIME (SEC.)REVRESE VOLTAGE, (V) IMPEDANCE PER LEG FIG. 6- TYPICAL TRANSIENT THERMAL PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG. 5- TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD VOLTAGE,(V) PER LEG (℃/W) TRANSIENT THERMAL IMPEDANCE CURRENT, (A) INSTANTANEOUS FORWARD (A) AVERAGE FORWARD OUTPUT CURRENT FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEGOUTPUT RECTIFIED CURRENT FIG. 1- DERATING CURVE INSTANTANEOUS REVERSE CURRENT, (A) PEAK FORWARD SURGE, CURRENT,(A) FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG NUMBER OF CYCLES AT 60 HzCASE TEMPERATURE, ℃ CHARACTERISTICS PER LGE FIG. 3- TYPICAL FORWORD RATINGS AND CHARACTERISTIC CURVES GBJ8005 THRU GBJ810