GBJ606F MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Rating 600V PRV
- Ideal for printed circuit board
- Low forward voltage drop, high current capability
- Reliable low cost construction utilizing molded plastic technique results in inexpensive product
- The plastic material has UL flammability classification 94V-0 Maximum Ratings And Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Characteristic Symbol Values Unit Maximum Recurrent Peak Reverse Voltage Vrrm 600 VMaximum RMS Voltage Vrms 420 Maximum DC Blocking Voltage Vdc 600 Maximum Average Forward (with heatsink Note 2) Rectified Current @ Tc = 100°C (without heatsink) I(AV) 6 2.8 APeak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Ifsm 175 Maximum Forward Voltage at 3A DC Vf 0.95 V Maximum DC Reverse Current @ Tj = 25°C at Rated DC Blocking Voltage @ Tj = 125°C Ir 500 μA I2t Rating for Fusing (t<8.3ms) I2t 120 A2s Typical Junction Capacitance Per Element (Note 1) Cj 55 pF Operating Temperature Range Tj -55 to +150 °C Storage Temperature Range TsTg Notes: 1. Measured at 1MHz and applied reverse voltage of 4V DC 2. Device mounted on 75mm × 75mm × 1.6mm Cu plate heatsink. 3. The typical data above is for reference only
Page <2> V1.024/09/19 Low VF Glass Passivated Bridge Rectifier Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Rating and Characteristic Curves
Page <3> V1.024/09/19 Low VF Glass Passivated Bridge Rectifier Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Low VF Glass Passivated Bridge Rectifier GBJ606F Dimension: Dimensions : Inches (Millimetres) Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.