GBJ6005 MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts GBJ6005 THRU GBJ610 CURRENT 6.0 Amperes

FEATURES

  • Plastic package has UL Flammability Glassification 94V-0
  • Glass passivated chip junctions
  • High case dielectric strength of 1500 VRMS
  • High surge current capability
  • High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length MECHANICAL DATA
  • Case: molded plastic body
  • Terminal: Plated leads solderable per MIL-STD-750 Method 2026
  • Mounting position: Any (Note 3)
  • Mounting Torque: 6 in – 1bs max.
  • Weight: 0.26 ounce, 7.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS GBJ 6005 GBJ 601 GBJ 602 GBJ 604 GBJ 606 GBJ 608 GBJ

610 UNIT

Maximum Reverse Peak Repetitive Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 100 Volts Maximum Average Forward Rectified Current, At TC=110℃(Note 1) I(AV) 6.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 150 Amps Rating for Fusing (t＜8.3ms) I2t 127 A 2s Maximum Instantaneous Forward Voltage drop Per leg at 3.0A VF 1.0 Volts TA=25℃ 5.0 Maximum DC Reverse Current at rated DC blocking voltage per element TA=125℃ IR 500 μA Typical Junction Capacitance, per let (Note 4) CJ 211.0 94.0 pF Typical Thermal Resistance (Note 2) RJA 35.0 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃/W Storage Temperature Range TSTG (-55 to +150) ℃ Notes: 1. Unit mounted on AL Plate heatsink (100mm×100mm×1.6mm) 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum Heat transfer with #6 screws 4. Measured at 1.0 MHz and applied reverse voltage of 4.0 V 2.7-3.1 3.4-3.8 4.4-4.8 3.0×45 0.9-1.1 2.0-2.4 2.5±0.2 29.7-30.3 O O GBJ 5.0 φ3.1-3.4 17.0-18.0 3.8-4.2 10.8-11.2 19.7-20.3 0.6-0.8

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000Volts GBJ6005 THRU GBJ610 CURRENT 6.0 Amperes 60Hz Resistive or Inductive Load (6.5×3.5×0.15cm)AL.Plate 2.6×1.4×0.06"Thk Heat-Sink Mounting,Tc 500 150100 6.0 100 FIG. 1- DERATING CURVE RECTIFIED CURRENTOUTPUT FORWARD SURGE CURRENT PER LEG FIG. 2- MAXIMUM NON-REPETITIVE PEAK CURRENT,(A) PEAK FORWARD SURGE, AVERAGE FORWARD OUTPUT,CURRENT (A) FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz CHARACTERISTICS PER LEG FIG. 4- TYPICAL REVERSE LEAKAGE CURRENT, (A) INSTANTANEOUS REVERSE INSTANTANEOUS FORWARD CURRENT, (A) PER LEG INSTANTANEOUS FORWARD VOLTAGE,(V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE, (pF) REVRESE VOLTAGE, (V) T, HEATING TIME (SEC.) 100 150 10 1001 500 0.01 0.1 100 100 0.1 0.01 1000 100 1001 100.1 100.01 0.1100 1 100 0.1 T = 150℃J Single Sine-Wave (JEDEC Method)

1.0 CYCLE

T =125℃J JT =25℃ Pulse width=300μ JT =25℃ 1% Duty Cycle Vsig=50mVp-p f=1.0MHz T =25℃j 50-400V 600-1000V RATINGS AND CHARACTERISTIC CURVES GBJ6005 THRU GBJ610